HI-TEN INTERNATIONAL

Kankaria, Ahmedabad, Gujarat

Black is the darkest color, the result of the absence or complete absorption of visible light. Its conductive and heating properties are taken into consideration while dealing with this product.

Black Masterbatch has been manufactured with up to 50% of carbon black content in its composition that makes it suitable for use as the black pigment in many plastic applications and also available as per customer requirement with or without UV protection in the end products. Our Raw Material expertise and dispersion technology helps you to achieve highest quality results.

Major application areas of this Masterbatch are blow molding, injection molding, HDPE pipes, mono filaments, Film extrusion etc. We play vital role in such key Market like Agricultural Film, packaging Textile, non woven and toys.

DurabilityHigh JetnessUV StabilityUniform DispersionHigh Temperature ResistanceNo Issues of bleed or bloomEase of processibility

Plastics generally ages rapidly under the effects of light, oxygen and heat leading to
Loss of Strength
Stiffness of flexibility
Loss of colour
Loss of gloss and scratching

After polymerization, most plastics are pelletized and shipped to compounders, polymer converters and subsequently manufacturers of the final plastic article. During this process, the polymer undergoes several processing steps which usually involves extrusion of molten polymer. Each processing step causes degradation, a result of the combined action of shear, heat and oxgyen.

Antioxidant Masterbatch has wide application in the plastic industry for protecting the polymers from degradation at high temperature range. Formulated on the basis of stearically hindered phenolic antioxidants that are properly dispersed in poly-olefin carrier, these masterbatches are responsible for protecting and retaining the gloss and mechanical properties of the end product.

Primary phenolic & secondary phosphite stabiliser packages
Prevents the degradation of products at high temperature
Maintains the gloss and mechanical properties of product
Better stabilization of the polymer during processing
Finished product stabilisers to enhance lifetime performance

Pipes
Profiles
Films
Tapes
Cables
Geotextiles
Injection molded parts
Blow molded items
Rotomoulded tanks

Nucleating agents promote the crystallization of semi-crystalline polymers. These additives function by presenting a heterogeneous surface to the polymer melt, making the crystallization process more thermodynamically favorable. As a result of the this effect, the temperature at which the polymer begins to crystallize from the melt is increased, as are the rate of nucleation and overall rate of crystallization. These results into three main benefit i.e. property enhancement, improved molding productivity and increased transparency.

These masterbatches are composed of superior quality of nucleating agents and specialty organic additives dispersed in polyolefin carrier resin. These masterbatches remarkably lower down the cycle time of moulding process along with increase the dimensional stability of the product.

Reduces haze in injection molded items
Increases the transparency
Improves the dimensional stability
Lowers the cycle time for moulding process

Injection molded items
LDPE and PP polymers

Colours are the smiles of nature. Perfect shade with Quality at effective rates can be achieved by proper selection of pigments, additives and Carrier base and perfect mixing process. At Sumiran, We have dedicated team to focus on proper choice of Raw Materials and production house with advanced technology along with professional team to provide complete customer satisfaction.

Sumiran Masterbatch has developed a sound production and quality control infrastructure to match the stringent quality expectations of clients. Made with high quality pigments, superior mixing process, in house laboratory with spectrophotometer and trained chemists provides best batch to batch consistency in quality as well as color specification.

We have matched 1000 different shades of colours as per customer needs with perfection because of strict Quality Check backed by the equipment and trained personnel in our laboratory.

These Masterbatch are widely used in blow molding of bottles, injection molding of household items, Lamination, Tarpaulins and insulation of cables.

Greater production flexibilityImproves thermal stabilityExcellent dispersionCustomized Product

This Masterbatch is based on stearate and amine bases chemicals. It is mainly used in films and moldings made of PE and PP. It gives lubricating effect during moulding or extrusion contributing to a smooth, shiny surface on the product produced. It is also used as an antistatic agent to reduce the electrical resistance on the surface of films and molded products. It also gives uniform cell size distribution in expanded polyethylene (EPE) foams. In addition to this, we test all the final chemicals on various parameters to ensure quality. We also pack our chemicals using premium packaging material to ensure safety.

Provides lubricating effect in extrusion process
Smooth and shiny surface on the end product
Reduces electrical resistant on the surface
Uniform cell size in EPE foams
Excellent insulating properties
Compatible with LDPE, LLDPE, HDPE and P. P

Films
PE and PP molded items
Extrusion process
EPE foams
Electrical appliances

Exposure to sunlight and some artificial lights can have adverse effects on the useful life of plastic products. UV radiation can break down the chemical bonds in a polymer. This process is called photodegradation. It ultimately causes cracking, chalking, color changes and the loss of physical properties. To counteract the damaging effect of UV light, UV stabilizers are used to solve the degradation problems associated with exposure to sunlight. UV stabilizers can be categorized by two general classifications ultraviolet light absorber (UVA) and hindered amine light stabilizers (HALS).

HALS are extremely efficient stabilizers against light- induced degradation of most polymers. They do not absorb UV radiation, but act to inhibit degradation of the polymer. Significant levels of stabilization are achieved at relatively low concentrations.

UV Masterbatch is available with concentration from 10% to 20% using high quality of HALS which helps to protect the polymers against UV Degradation and strength the production level.

the expertise developed by Sumiran in this field allows us to provide you Taylor-made and Cost Effective Masterbatch Solutions to your particular needs.

1% to 5% loading with polymers for better result
High resistance to extraction
Long Term UV Resistance
Excellent surface characteristics

Agricultural green house film, FIBC bags, moulded crates, drums, garbage cans, garden furniture, outdoor articles etc
Tarpualin, Roto moulded Water Tank
Shaded Net
Woven sacks, HDPE/PP raffia tapes, LDPE/LLDPE/PP lamination.
All types of PP/PE made products.

While dealing with Thin polyolefin films or bags, there is a tendency towards blocking to each other or surfaces of other materials. Opposite film faces are prone to adhere to each other or with other surfaces, which results in film block and affects processing during film winding operations.

If not properly treated, blocking causes severe handling problems during film unwinding and final packaging applications which created obstacles for the complete manufacturing process. In order to resolve this problem, the film must be given roughness by incorporating specific fillers, whether organic or mineral in nature.

The most effective method to resolve this issue is to add antiblock Masterbatch. An Antiblock additive present in the resin microscopically protrudes from the film surface. This creates asperities which helps to minimize the film to film contact, increasing the distance between the two layers, thereby minimizing blockage.

We offer a quality approved array of Antiblock Masterbatch (Anti Block Agents). It is a combination of special additives for efficient anti block and the special processing aid technology. Offered range is very effective in reducing adhesion of plastic products without effect on the transparency of plastics products. It is mainly used in films and cap opening to maintain good performance. We offer these agents to our customers at reasonable rates.

Reduce the adhesion effect of plastic products distinctly

Lubricant function during machining process for plastic products
When the ratio is suitable, it will not affect the transparent property

It has been recommended for in PE, PP, PO blown film products, steam beads bags products. Blow molding, extrusion, injection moulding and casting processing.

Optical brighteners are often used to enhance the appearance of color of fabric and paper, causing a whitening effect; they work via a a fluorescent mechanism which absorbs light in the UV spectrum and emits light in the blue region of visible spectrum to yield a brighter and fresher appearance This Masterbatch has the capability of re- emitting blue light with absorption of ultraviolet radiation which result into whiteness and brightness to the plastic products without any bluer tone.

Reduces yellowing of plastic products
Enhance the whiteness and brightness
Smooth and glossy surface of film
Absorbs UV radiation
Re- emit blue light
Improves optical properties
Contains highly concentrated brightener chemicals

Films and Sheets
Fibers
Molded Thermoplastic
Extruded Products
Roto Moulding

Slip additives are added to reduce the surface coefficient of friction of polymers and are used to enhance either processing or end applications. High and low level slip additives are available and immediate and slow acting performance can be engineered into the Masterbatch. Small amounts of slip additives not only enhance the hand of film, but also aid in process ability. It can be effective in enhancing mold release properties. It has been recommended for the film, sheet, injection Moulding and others applications.

Reduce the coefficient of friction (COF) of the surface.
Cost effective, highly concentrated systems available.
Overcomes film tackiness
Enhances the smoothness of films
Forms a lubrication layer on the film

White is the lightest color and is achromatic (having no hue), because it fully reflects and scatters all the visible wavelengths of light and it has different shades like milky white, snow white, chalk white etc.

White Masterbatch has been growing continuously and has an unlimited potential in the market. Therefore, in order to be with the market space, we keep updating our products by using the right amount of Additives & best quality Titanium Dioxide ( upto 75% content) which is the most essential ingredient for the production of all White Masterbatch.

Our expert team is specially committed for various range of White Masterbatch consists of a wide selection of custom made and innovative whites with or without fillers or with additional agents like UV or thermo stabilizers at convincing rates in the market.

Used especially for opacity and whitenessHigh thermal stability under processing conditions reduces agglomeration of TiO2Improves heat resistanceImproves resistance to weatherActs as a UV protector

We have uniquely positioned ourselves as a dependable firm, engaged in providing excellent quality PPA Masterbatch. These masterbatches are specially engineered for improving the performance of blown films & other extrusion products in terms of optical properties, mechanical properties with reductions in the production cost.

These Masterbatches are based on Fluoropolymers and are widely recommended for improving the processibility of polymers at higher shear rates.These are formulated to form a microscopic dispersed phase within the polymer carrier.

During processing the fluoropolymer gets coated on the walls of the extruder and die. This reduces the extuder backpressure to decrease. To achieve the coating in a reasonable time the process aid masterbatch is typically added at 1% until the beneficial effects are seen. After this the addition rate can be reduced to 0.5% down to even 0.25% as long as the effect continues to be evident. A small addition must be maintained throught the extrusion run.

Our quality controllers stringently check this product against several quality parameters to ensure a defect free supply at the clients end. Our offered PPA Masterbatch is known for their better output and high quality in the market.

Reduces / eliminates melt fracture especially when processing polymers with varying MFL e.g in Multi layer films and can also reduce extruder torque.

Eliminate sharkskin effectReduce or eliminate die build up.Reduce or eliminate Gels and optical defects.Increase the output by up to 20%.Reduces electricity consumption due to reduced back-pressure in the extruder.Optimization of extruder process lead to increase in output along with enhanced and bi-directional physical properties and improved clarity and gloss.