Our Products
Marine Tools & Equipments
1 Products availableBuilding Hardware
1 Products availableFasteners
1 Products availableIndustrial & Engineering Products
1 Products availableBollards
1 Products availablePackaging Seals And Caps
1 Products availableFashion Jewelry
1 Products availableWe are leaders in the market for providing best range of HI-TECH ROLLER FENDERS, GROUT SEAL, RUBBING STRIP, SHEAR FENDERS and Cone Fenders
FEATURES:Very robust and simple fender type.Used to protect corners of piers where vessels are turning close to the structure.Give little resistance by rolling contact rather than absorb the energy of berthing.
ADVANTAGES:Available in a single and multiple stacksReduce friction due to rollingVirtually no maintenance required
APPLICATIONS:
I-TECH RUBBING STRIPS :
Hi-Tech Rubbing Strip (HRS) can be used as a protection material for the boat and boat landing surface protection. HRS are available in many shapes and jacket leg fittings depending on requirement.
Hi-Tech Elastomers shear fenders (HSHF) are designed to absorb energy through the stretching of the elastomeric component in the lateral direction while maintaining the ability to support heavy loads perpendicular to that movement. The shear fender also maintain a linear load vs. deflection characteristic throughout their usable range of deflection.
Hi-Tech Elastomers has developed a rubber ring (HBR) which can be used to encase a pile or cylinder component in a barge bumper providing extra energy absorption capability and preserving the integrity of steel cylinder. The ring will also rotate around the cylinder thus minimizing with the shear forces imparted from a vessel with lateral movement during berthing operations.
FEATURES:Highest energy absorption to reaction ratio of any fenders.Highly durable and efficient.Higher shear stability & inherent resistance against shear forces.
ADVANTAGES:More stable at large compression angles.No reduction of energy up to 10 degree deflection angle.Internal stopper restricts deflection of HNC beyond design parameter.
APPLICATIONS:Applicable to all type & size of vessel berthing .
FEATURES:Special rubber moulded chain used to prevent corrosion.Extra moulded thickness provides high abrasion and durability.
ADVANTAGES:Safe and cost-effective.Ideal for hazardous area.Low maintenance cost.
APPLICATIONS:Specially useful for naval ships.
FEATURES:Rope/Fiber/rubber sleeve nets are designed to provide an extra protective layer for the pneumatic fender which increases their shelf-life.
ADVANTAGES:Wire rope net is lighter than a chain net.Rubber sleeves provide an additional protection against scratching of hull.Fiber net has a strong fiber bundle compare to chain & wire rope which provide additional strength.
APPLICATIONS:Used at terminals where the risk of fire is high viz. LNG Terminals.
FEATURES:Modular fendering system which provides most cost effective solution.Can be engineered with options of conventional steel panel & UHMW-PE panels which are very light weight and maintenance free.
APPLICATIONS:Fendering system for minimum limited wharf area.Ro-Ro jetties.Multipurpose Berth.Offshore structure applications.
HI-TECH MARINE BUOYS :
Hi- Tech has bought a technological breakthrough by developing steel- reinforced rubber buoys over the conventional MS, PE, GRP & FRP fabricated buoys.
FEATURES :Low weight & Low maintenanceFlexible & Easy to handleSustaining stable LoadProvide great buoyancy in deep water
HI-TECH MODULAR FLOATING SYSTEM :
It helps to create all kind of floating structures of easy assembly and low cost, including the floating facilities for various customised applications.
One can make floating structure such as mentioned below:
FEATURES:High energy absorption with low reaction force.Free rotating design gives low shear force.Fenders buoyancy allows it to freely float with water level.
ADVANTAGES:Flexible design.Safe and low maintenance.
APPLICATIONS:Lock entrance.Corner protection.Bridge protection and is used where large tidal changes occurs.
Hi-tech provides rubber mouldedladderswhich has dual function of a fender for small boats and also asladder. The rubber is durable, tough, weather resistance and also has high corrosion resistance. The steps are especially designing to be anti-skid. Ourladdersare easy to install with low maintenance. Hi-techladdershave low surface pressure and larger contact area which enable them to act as fenders for the smaller boats. Theseladderscan be installed in areas where the traditionalladdersface severe damage due to machinery, vehicle, forklift or boat impact.
FEATURES :DurableToughWeather resistance with high corrosion resistance.
ADVANTAGES :Dual function as fender +ladderSteps are anti-skid.Available in various lengths as per requirement.
APPLICATIONS :Offshore platformsSmall boats
HI-TECH SHOCK CELLS :
Hi-Tech shock cells (HSC) for offshore platforms was developed as a safe efficient boat landing system that can absorb energy in both deflection and shear. The shock cells can be manufactured with or without an eccentric bumper ring. The basic principle of a shock cell is the adhesion of rubber to two concentric steel tubes.
FEATURES:Modular fendering system which provides most cost effective solution.Can be engineered with options of conventional steel panel & UHMW-PE panels which are very light weight and maintenance free.
APPLICATIONS:Fendering system for minimum limited wharf area.Ro-Ro jetties.Multipurpose Berth.Offshore structure applications.
FEATURES:Manufactured from Aircraft tyres/Specially moulded tyres.
ADVANTAGES:Long service life.Low maintenance cost.
APPLICATIONS:Used in Ship-to-Ship TransfersUsed as solution for temporary and/or emergency fendering system installations.Used for tankers, gas carriers, bulk cargo ships, fast ferries & other aluminum hull vessels.
Oil Booms barriers are used to contain oil spills in the oceans. Floating property of oil on water helps the boom round up and contain oil and keep it from expanding and contaminating beaches, islands, and wetlands. The boom has weight, floating tube, and tall wall-like structure to help keep the oil contained. Hi-tech offers different types of oil booms (HOB) which are actually solutions for oil spill response. These oils booms are used for many oil spill response such as oil containment, oil diversion, oil deflection or oil exclusion.
Containment Booming: Placing a boom in a body of contaminated water for the purpose of holding or slowing the movement of contamination.
Diversion Booming: Placing a boom in a body of contaminated water for the purpose of diverting the contamination to a collection point.
Deflection Booming: Placing a boom in a body of water for the sole purpose of changing the course of the contamination. (Note: This method is used for contamination that is not intended to be recovered, and therefore not typically associated with oil spills)
Exclusion Booming: Placing a boom in a body of water for the purpose of blocking off a sensitive area from contamination.
HI-TECH DREDGER HOSES AND FLOATS :
FEATURES:High energy absorption with relatively low reaction force.Thick and tough filament nylon reinforced non-marking urethane skin which makes it durable to extreme marine weather condition.Resist UV rays and ozone effect.
ADVANTAGES:Low maintenance & cost effective.Extremely robust surface.Small damage can repaired easily on site.
APPLICATIONS:Used for submarines.Heavy duty ship to ship lightering operation.Use in cruise terminal.
FEATURES:Mainly used for sharp rope angles.Well-built & long lasting design.It provides stable and safe mooring
TYPES OF BOLLARDS :Hi Tech Tee type Bollard (HBL-T)Hi-Tech Twin Horn Bollard (HBL-TH)Hi-Tech Barrel type Bollard (HBL-B)
BOLLARD MATERIAL :Mild SteelCast ironGrey cast ironCast Steel
HITECH PROTECTION BARRIERS :
Hi-tech provides various types of marine protection barriers to protect marine assets. Security of marine assets has become necessary in recent times and hence a marine protection barrier is essential security equipment for NAVY ships and other vessels.
Hi-tech marine protection barrier (HPB) is laid as a line of demarcation to protect the maritime facilities. The fill system is extremely durable and environment friendly. HPBs are the first line of defence for protecting the secured area from any harm arising from water bodies including protection from speed boats. it protects marine assets from terrorist activities not only on water surface area but also protect under water. Hi-techs barrier range can be used as security barriers, fencing barriers and even as demarcation barriers depending on the type of barrier selected.
Hi-Tech zip- out closure (HZC) is a subset of the HTE diaphragm closures that are designed with a metal dome sealed by rubber to the jacket leg, piling sleeves or piling with the purpose of being removed once the sealing of the tube is no longer required.
FEATURES:For any level of impact, LinearMotionFenderSystem (HLMF) provides equal absorption of energy. This system is completely customised and unique system which varies from project to project.HLMF system has low reaction forces compared to conventionalfendersystems which renders lower hull pressures.
ADVANTAGES:HLMFs have non-tilt frontal panels and are positioned vertically.HLMF system's design enables it to distribute the energy uniformly and has low reaction force and hull pressure.Even at large berthing angles, there is no performance loss.
APPLICATIONS:Naval facilities.High Tidal zones.LNG & Tanker Terminals.Monopiles/Soft Structures.Ro-Ro & Fast Ferry Berths.
Hi-Tech buoys are supplied with essential Navigational aids & accessories as recommended by IALA for automatic identification capabilities.
Hi-Tech Gangway is a equipment for people boarding & disembarking safely and favorably during oil tanker operating at modern size oil dock. Its is a necessary choice to adopt gangway to replace accommodation ladder so as to accelerate loading work of tanker and ensure safe boarding and disembarking . The Gangway almost become a necessary equipment as loading/unloading equipment.
Fenders are an extension of D Type Fenders. These fenders are generally mounted on tug boats, work boats, pilot boats, quays, piers, etc where it creates a bumper that is resistant to various forces.
Fenders are an extension of D Type Fenders. These fenders are generally mounted on tug boats, work boats, pilot boats, quays, piers, etc where it creates a bumper that is resistant to various forces.
Hi-Tech Elastomers has developed shock pads for the off-shore industry based on the bridge bearing pads. These pads are a combination of steel plates with rubber vulcanized between them.Used mainly in lifting systems of self leveling platforms as shock absorbers and vibration dampers, shock pads may be used in other application requiring support of heavy loads without a rigid structure.
HI-TECH BARGER BUMPER ASSEMBLY :
Hi-Tech Elastomers has the ability to package its shock cells with high strength steel barge bumper cylinder providing the customer with complete barge bumper system for installation on their platform.The Hi- Tech engineering department has the ability to design a barge bumper system , analyze it for all loading condition then have the system manufactured in our production line .
