Hi-TECH BUTTERFLY VALVES INDIA PVT. LTD.

South Tukoganj, Indore, Madhya Pradesh

Features and Benefit:

• Resilient seat seals bubble-tight against the disc, isolating the valve body and stem from the line media.
• Unique dovetail seat retention allows for convenient and economical field replacement.
• A primary stem seal formed by preloaded contact of the disc hub with the flatted seat surfaces and secondary stem seal formed by an interference fit of the stem through the seat provide bubble-tight shut-off to full valve pressure rating.
• Rounded polished disc and hub edges provide full 360 degree concentric seating, resulting in minimum flow restriction, lower seating/unseating torque and longer seat life.
• Molded-in, O-ring seat serves as flange seal, totally eliminating the need for gaskets between the flange and the valve.
• Superior one-piece through-shaft provides high-strength and positive disc control.
• Stainless steel taper pins are driven, sealed and locked for maximum torsional strength and resistance to vibration loads.
• Cast-in top mounting plate is an integral part of the body which is standardized to allow direct mounting of all kind of actuators.
• Each valve is factory tested to 110 percent of specified pressure rating, helping ensure bubble-tight shut-off to the full valve rating when bolted between flanges in either direction of media flow.

Product Standard

Design Standard Testing Standard Face To Face End Connection

AWWA C 504, API 609, BS 5155, IS 13095, ASME B 16.34, IS 13095

API 598 / BS 6755I / BS EN 12266-1

AWWA C 504, API 609, BS 5155, IS 13095 , ASME B 16.34, IS 13095

ANSI B 16.5, BS 10 Table, AWWA C 207, IS 6392, ASME B 16.47, etc.

Valve Operation

OperatorSize Range

Lever :	2"- 6" - PN 6/PN 10/PN 16/Class 150
Gear Operator :	6" Above - PN 6/PN 10/PN 16/Class 150

Material

Shell Trim

WCB, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastelloy, Inconel, Duplex Stainless Steel

WCB, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastelloy, Inconel, Duplex Stainless Steel

Faetures:

• Integrally Cast Mounting pad provides direct mounting of many actuators as per ISO 5211.
• Flattened body bore at stem journal ports positions stem bearing near disc, providing maximum stem support
• Disc taper pins are tangentially positioned half on disc and half in stem, which eliminates potential of failure. Special Positive locking arrangement can also be provided if asked / as per customer need.
• Integrally cast disc position stop perfectly locates the disc in seat, achieving maximum seat and seal life.

Product Standards:

Design StandardTesting StandardFace To FaceEnd Connection

AWWA C 504, API 609, BS 5155, IS 13095, ASME B 16.34, IS 13095

API 598 / BS 6755 I / BS EN 12266-1

AWWA C 504, API 609, BS 5155, IS 13095 , ASME B 16.34, IS 13095

ANSI B 16.5, BS 10 Table, AWWA C 207, IS 6392, ASME B 16.47, etc.

Valve Operation:

OperatorSize Range

Lever :	2"- 6" - PN 6/PN 10/PN 16/Class 150
Gear Operator :	6" Above - PN 6/PN 10/PN 16/Class 150

Material:

ShellTrim

WCB, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastelloy, Inconel, Duplex Stainless Steel

WCB, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastelloy, Inconel, Duplex Stainless Steel

Features:

• Minimizes piping support with the compact wafer style body.
• To meet special applications and service conditions, Hi-Tech valves can be offered with many different metallurgy like Titanium, PFA Lined, Nickel etc.
• Maintenance is minimal with the field replaceable O-ring seat available in all styles and sizes.

Product Standards:

Design Standard Testing Standard Face To Face End Connection

Manufacturer Standard

API 6D/API 598

ASME B 16.10/API 6D

Wafer Type - suits to ANSI B 16.5 or as per requriement

Material:

Shell Trim

WCB, WC1, WC6, WC9, LCB, LCC, LC3, C5, C12, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastelloy, Inconel, Duplex Stainless Steel

13% Cr Steel, 304, 304L, 316, 316L, 321, 347, F51, Monel

Feartures:

• Minimum Body Cavity : Enhances performance in many services by minimising media retention and process contamination.
• Stem : Larger stem diameter. Blowout proof stem.
• Ball : Super (mirror) smooth finish.
• Anti Static Grounding : Ball stem and body are continuously grounded to eliminate static discharge.
• Replaceable Handle : Simplicity and Security.
• Body Gasket : PTFE.
• Seats : PTFE.
• Seat Design (Fire Safe) : Cavity pressure releving (CPR) seats ensure that pressure generated through media expansion when the valve is closed is safely releaved upstream.
• Special Options :
• Stem Extensions
• Special alloy materials are available, i.e. NAB / Brass / Gun Metal / Alloy 20 / 904 L / Hastelloy C
• Control ball valves are available
• Reduced bore and full bore options are available
• Lower torque for ease of operation and reduced actuator cost.
• Application : Petrochemical, Oil & Gas production, Refining, Energy, Pulp & Paper and others.
• Service : Steam, Chemicals, LPG, Thermal Fluid, Chlorine, Ammonia, Sour Gas.

Valve Operation:

OperatorSize Range

Lever :	2"- 4" - Class 150, 300
Gear Operator :	6" & Above - Class 150, 300

Material:

Shell Trim

WCB, WC1, WC6, WC9, LCB, LCC, LC3, C5, C12, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastelloy, Inconel, Duplex Stainless Steel

13% Cr Steel, 304, 304L, 316, 316L, 321, 347, F51, Monel