Our Products
Valves & Valve Fittings
2 Products availableWe are leaders in the market for providing best range of Swing Check Valve, Gate Valve, Globe Valve and Knife Gate Valves
Application:
Swing check valves are designed to close quickly and automatically with positive shut off in either horizontal or vertical (flow up) pipe runs.
Inherently, swing check valves have a low pressure drop and are best suitable for velocity applications.
Our closure design allows our swing check valve to close completely even and remain closed with no flow when installed in a horizontal pipe run.
Product Standard:
API 6D, ASME B 16.34, ASME B16.25 |
API 598, BS 6755I |
ANSI B 16.10 |
ANSI B 16.5, BS 10 Table, AWWA C 207, IS 6392, ASME B 16.47, etc. |
ASME B 16.34 |
Application:
Gate valves are primarily used for stop valves fully opened or fully closed. They are not normally considered for throttling purposes, but more for slurries, viscous fluids, etc.
Gate valves are characterized by a traveling wedge, which is moved with the operation of the stem nut. The wedge travels perpendicular to the direction of the flow.
Gate valves usually have a minimum pressure drop when fully open, provide tight shut-off when fully closed, and remain relatively free of contamination buildup.
Product Standard:
API 6D, API 600, ASME B 16.34, ASME B16.25 |
API 598, BS 6755 I |
ANSI B 16.10 |
Flanged End - ANSI B 16.5, BS 10 Table, etc.Butt Weld End ASME B 16.25Screwed End - ASME 1.20.1 |
Globe valves are primarily used as control valves where throttling or both throttling and shut-off are required. Globe valves can also be used for on-off service; however, because of the design, a pressure drop becomes inherent. This is generally confined to on-off applications where the valve is normally closed and pressure drop is not important when the valve is open. Normal applications will find the globe valve with the flow and pressure under the disc. Hi - Tech cast steel globe valves are commonly made in outside screw and yoke designs with full ports (including seat ring) and heavy-duty, conical plug type discs.
Product Standard:
API 6D, API 1868 , ASME B 16.34, ASME B16.25 |
API 598, BS 6755 |
ANSI B 16.10 |
ANSI B 16.5, BS 10 Table, AWWA C 207, IS 6392 |
ASME B 16.34 |
Features:
Product Standard:
MSS SP 81 |
BS 6755 I /API 598 |
MSS SP 81 |
Flanged End / Lug Type / Wafer Type - ASME B 16.5 |
Valve Operation:
Lever, Gear Operator, Electrical Actuator, Pneumatic Actuator. |
Material:
WCB, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastelloy, Inconel, Duplex Stainless Steel |
WCB, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastelloy, Inconel, Duplex Stainless Steel |