world famous riegger grinding wheels, used for cnc tool grinding machines.

taiwan made shrink fit machine for milling chucks (4 kw)

• Easily detects an imbalance of less than 0.1g on small parts whether the part weighs 50 g or 8 kg
• Soft bearing balancing station. Light enough to move without special equipment
• Self-sufficient. No additional computers required
• Requires no PC or programming knowledge to operate
• Help prevent spindle bearing damage and thus lowers operating costs
• Balances every tool or wheelset
  Tool balancing increases tool life and improves tool performanceWheel balancing increases wheel life and produces a better surface finish and cutting edge on the tools you grind

An MPM balancing system will not only help you grind better tools, it will also reduce grinding wheel wear and machine repairs. balancing improves the mechanical stability of your grinding machine and reduces stress on the grinding spindle.

hss drills

1. sizes available from 0.05 - 45 mm and length 3xd - 25xd for all kinds of materials pmknsh.

2. 4 facet point/ conical, single/double margin, one setting grinding, parabolic drill, special micro-geometry, split point nas 907 std.

3. coating - bright, steam tempered, tialn nano, altin nano, tin, tin-tip, nitrided lands.

4. can perform machining tolerance of h6, h8, -0.004.

5. available in cyl, ha, mk shank.

6. tip angle 90, 118, 120, 130, 135 degrees.

carbide drills

1. sizes available from 0.1- 40 mm and length 1.5xd - 80xd for all kinds of materials pmknsh.

2. 4 facet point/ conical, single/double margin, one setting grinding, parabolic drill, special micro-geometry, nas std.

3. coating - bright, nickel, altin, ticn, tialn nano, altin nano, tialn, tin, altin+.

4. can perform machining tolerance of h5, h6, h7, h8, m7.

5. available in cyl, ha, he, mk/mt shank.

6. tip angle 90, 118, 120, 130, 135, 140, 142, 145 degrees.

tool holder

1. available in hsk-a, hsk-e, hsk-f, sk, mas/bt, er std.

2. hsk shrink fit chuck size range from 3-32mm.

3. hsk hydraulic chuck size range from 3-32mm.

4. shrink fit / hydraulic / collet / side lock / tapping / drilling chucks.

maximum taper accuracy by using constantly controlled and calibrated measuring equipment. absolute accuracy of fit and optimum radial and axial run-out. extreme load-bearing capacity due to the use of tempered material and the best heat-treating processes. optimum surface quality and associated long-term dimensional stability and precision, as well a spindle protection as a result of finished surfaces. balanced models for improved grinding results and spindle life. slim profile for optimal grinding wheel clearance and selection flexibility excellent concentricity and run-out properties variety of clamping diameters available available with a cylindrical shank or integrated in an sk50 holder

• slim profile for optimal grinding wheel clearance and selection flexibility
• excellent concentricity and run-out properties
• variety of clamping diameters available
• available with a cylindrical shank or integrated in an sk50 holder

clamp sticks extremely tight concentricity and runout tolerances allows you to manufacture and resharpen tools with high precision. clamp sticks fast and easy handling gives you enormous flexibility.

reamer

1. sizes available from 01-80 mm for all kinds of materials pmknsh.

2. can perform machining tolerance of h7, +0.004, +0.005, js9.

3. available in vhm, hm, hss-e, hss materials.

4. available in hb, cyl, ha, mk/mt shank.

5. coating - bright, nitrided, steam tempered, altin nano, altin, tin.

taps

1. sizes available from m1- m39 for all kinds of materials pmknsh (cutting, forming, milling).

2. can perform machining tolerance of iso2/6h, 6hx, iso3/6g, 2b, 6gx, 6g.

3. available in vhm, hss-e-pm, hss-e, hss materials.

4. available in form b, c, d, e.

5. coating - bright, nitrided, steam tempered, altin, ticn, altizrn, alcrn, tialn, tin.

6. available in m, mf, unc, unf, bsw, g, pg, npt std.

milling cutter

1. sizes available from 0.3-25mm for all kinds of materials pmknsh.

2. can perform ramping up to 45degrees, hpc with h10 e8 tolerance, tpc, hsc, drilling, side milling, roughing, finishing, slotting. etc

3. rake angle -15, 5, 7, 9, 10.

4. nas std., chip breaker, unequal helix.

5. coating - blank, altin nano, tialsin, tialn, altin, altin+, tialzrn.

world famous riegger grinding wheels, used for cnc tool grinding machines.

taiwan made shrink fit machine for milling chucks (4 kw)

• Easily detects an imbalance of less than 0.1g on small parts whether the part weighs 50 g or 8 kg
• Soft bearing balancing station. Light enough to move without special equipment
• Self-sufficient. No additional computers required
• Requires no PC or programming knowledge to operate
• Help prevent spindle bearing damage and thus lowers operating costs
• Balances every tool or wheelset
  Tool balancing increases tool life and improves tool performanceWheel balancing increases wheel life and produces a better surface finish and cutting edge on the tools you grind

An MPM balancing system will not only help you grind better tools, it will also reduce grinding wheel wear and machine repairs. balancing improves the mechanical stability of your grinding machine and reduces stress on the grinding spindle.

hss drills

1. sizes available from 0.05 - 45 mm and length 3xd - 25xd for all kinds of materials pmknsh.

2. 4 facet point/ conical, single/double margin, one setting grinding, parabolic drill, special micro-geometry, split point nas 907 std.

3. coating - bright, steam tempered, tialn nano, altin nano, tin, tin-tip, nitrided lands.

4. can perform machining tolerance of h6, h8, -0.004.

5. available in cyl, ha, mk shank.

6. tip angle 90, 118, 120, 130, 135 degrees.

carbide drills

1. sizes available from 0.1- 40 mm and length 1.5xd - 80xd for all kinds of materials pmknsh.

2. 4 facet point/ conical, single/double margin, one setting grinding, parabolic drill, special micro-geometry, nas std.

3. coating - bright, nickel, altin, ticn, tialn nano, altin nano, tialn, tin, altin+.

4. can perform machining tolerance of h5, h6, h7, h8, m7.

5. available in cyl, ha, he, mk/mt shank.

6. tip angle 90, 118, 120, 130, 135, 140, 142, 145 degrees.

tool holder

1. available in hsk-a, hsk-e, hsk-f, sk, mas/bt, er std.

2. hsk shrink fit chuck size range from 3-32mm.

3. hsk hydraulic chuck size range from 3-32mm.

4. shrink fit / hydraulic / collet / side lock / tapping / drilling chucks.

maximum taper accuracy by using constantly controlled and calibrated measuring equipment. absolute accuracy of fit and optimum radial and axial run-out. extreme load-bearing capacity due to the use of tempered material and the best heat-treating processes. optimum surface quality and associated long-term dimensional stability and precision, as well a spindle protection as a result of finished surfaces. balanced models for improved grinding results and spindle life. slim profile for optimal grinding wheel clearance and selection flexibility excellent concentricity and run-out properties variety of clamping diameters available available with a cylindrical shank or integrated in an sk50 holder

• slim profile for optimal grinding wheel clearance and selection flexibility
• excellent concentricity and run-out properties
• variety of clamping diameters available
• available with a cylindrical shank or integrated in an sk50 holder

clamp sticks extremely tight concentricity and runout tolerances allows you to manufacture and resharpen tools with high precision. clamp sticks fast and easy handling gives you enormous flexibility.

reamer

1. sizes available from 01-80 mm for all kinds of materials pmknsh.

2. can perform machining tolerance of h7, +0.004, +0.005, js9.

3. available in vhm, hm, hss-e, hss materials.

4. available in hb, cyl, ha, mk/mt shank.

5. coating - bright, nitrided, steam tempered, altin nano, altin, tin.

taps

1. sizes available from m1- m39 for all kinds of materials pmknsh (cutting, forming, milling).

2. can perform machining tolerance of iso2/6h, 6hx, iso3/6g, 2b, 6gx, 6g.

3. available in vhm, hss-e-pm, hss-e, hss materials.

4. available in form b, c, d, e.

5. coating - bright, nitrided, steam tempered, altin, ticn, altizrn, alcrn, tialn, tin.

6. available in m, mf, unc, unf, bsw, g, pg, npt std.

milling cutter

1. sizes available from 0.3-25mm for all kinds of materials pmknsh.

2. can perform ramping up to 45degrees, hpc with h10 e8 tolerance, tpc, hsc, drilling, side milling, roughing, finishing, slotting. etc

3. rake angle -15, 5, 7, 9, 10.

4. nas std., chip breaker, unequal helix.

5. coating - blank, altin nano, tialsin, tialn, altin, altin+, tialzrn.