Heatcon Sensors Pvt. Ltd.

Hessarghatta, Bangalore, Karnataka

Cable Construction Designs : 

• Solid and Stranded Conductors
• Single &Multipair cables
• Shielded cables
• Armored cables 

THERMOCOUPLE CABLE COUNDUCTOR TYPES: 

• Original Thermocouple wire conductors
• Extension type conductors
• Compensating type conductors 

RTD CABLE COUNDUCTOR TYPES:- 

• Silver Plated Copper Counductors
• Annealed Bare Copper Counductors
• Nickel Plated Copper Counductors 

Cable Insulation Types AND Temperature Ranges:-

• PVC (MINIMUM OPERATING TEMP -50 °C& MAX OPERATING TEMPERATURE 100 °C) 
• SILICON (MINIMUM OPERATING TEMP -50 °C& MAX OPERATING TEMPERATURE 150 °C)
• TEFLON (MINIMUM OPERATING TEMP -260 °C& MAX OPERATING TEMPERATURE 250 °C)
• FIBREGLASS(MINIMUM OPERATING TEMP -70 °C& MAX OPERATING TEMPERATURE 500 °C)
• CERAMIC FIBRE(MINIMUM OPERATING TEMP -70 °C& MAX OPERATING TEMPERATURE 800 °C)
• ALUMINA FIBRE(MINIMUM OPERATING TEMP -70 °C& MAX OPERATING TEMPERATURE 1200 °C) 

Heatcon chemical immersion heaters are used for heating highly corrosive liquids and chemicals, the entire range of below applications:- 

• FUELS
• ELECTROPLATING
• GOLD PLATING Element wire

HEATCON thermocouple wire connectors are round pin for standard size & flat pin for mini.instrumentation with a temperature controller Thermocouple Connector designideal for fast and easy connection of Thermocouple extension, compensating cable or thermocouple wire itself. 

• Miniature Connectors
• Standard Size Connectors 
• Panel Sockets for Standard Size Thermocouple Plugs 
• High Temperature Ceramic Connectors 
• 3-Pin Mini Connectors for RID 

NABL accredited or Traceable In-House 

Traceable In-house or NABL accredited calibration is available for Base and Noble metal thermocouples and RTD sensors performed within our fully accredited laboratory. 

Calibration is usually by comparison, traceable to NABL calibrated primary standards, against SPRTs or Type S reference thermocouples from -80 to +1600°C. Fixed point calibration also available at -196°C 

Expert in Thermocouple and RTD Calibration: Heatcon specialized in thermocouple and RTD calibration and we are proud to offer a wide variety of industry sectors with accurate and traceable In-House or NABL (Accredited) calibration. This service is applicable for thermocouples, RTD sensors& cable under the scope of ISO/IEC 17025 & ISO 9001, all within our fully NABL accredited calibration laboratory. With the drive towards higher product quality standards and energy efficiency, end users are demanding more certainty and traceability from the products they purchase. 

Seamless high-temperature tubes and furnace tubes suitable for use in applications with temperatures above 500°C (932°F). 

High-temperature tubes includes a wide range of austenitic stainless steels and nickel alloys as well as iron-chromium-aluminium (FeCrAl) alloys, which can be used at temperatures up to 1250°C (2280°F). 

High-temperature tubes Includes:

• Boiler tubes 
• Composite tubes
• Ethylene furnace tubes
• Finned tubes
• Furnace tubes
• Lance tubes
• Muffle tubes
• Radiant tubes
• Recuperator tubes
• Reheater tubes
• Superheater tubes
• Thermocouple tubes 

Stock program 

Heatcon holds stock of five different grades commonly used in a variety of high-temperature tube applications. We also stock composite tubes.

• View stock program of high-temperature tubes
• View stock program of radiant tubes in FeCrAl alloys

Features : 

• Efficient IGBT based Induction Furnace
• Portable module
• Soft switching technology for power saving
• Robust Industrial design for high and low volume melting
• Steel frame construction and Auto shut feature on fault condition 

Applications :

• Jewellery application such as melting of precious metals like gold, silver, copper etc.
• Melting of various alloys for laboratory purposes
• Heat treatment of metal parts and research applications.
• Purification of Silicon Nb: " industrial melting furnaces are available with power rating from 10kw to 1000 for foundry casting etc." 

Digital Variac used for testing purpose. We are backed by highly dedicated team of professionals, which enable us in offering an array of Digital Variac. The offered range is made available in several standard specifications and can also be customized exactly asper the requirement of the clients. Our offered Digital Variac is mainly known for its fine finishing and effective performance.

DC Regulated Variable Power Supply Mainly used in laboratories and Industries. We are backed by highly dedicated team of professionals, which enable us in offering an array of DC Regulated Variable Power Supply. The offered range is made available in several standard specifications and can also be customized exactly asper the requirement of the clients. Our offered DC Regulated Variable Power Supply is mainly known for its fine finishing and effective performance.

Teflon coated heaters are mostly used in the process industry for heating harsh liquids & chemicals.

These heaters are similar to Immersion heaters as tubular heater is welded or brazed into a flange or threads and then the Teflon is coated on to the tubes to resist the tube from corrosion of chemicals.

High Frequency Indication Heating Machine Features:

• Fast heating cycles less than 99 seconds
• Efficient IGBT/MOSFET based Induction Machine Compact bench Top module
• Light weight and portable
• Auto shutdown feature on fault conditions
• Reduced oxidation with better quality joints 

Applications :

• Brazing of precious metals like gold. Silver, platinum palladium etc.
• Soldering or Brazing of cutting and drilling tool
• Heat treatment of metal parts including hardening and tempering shrink Heating Instant heating for Forging

The coil heaters coil heaters have maximum surface load and come with an IP rating for humidity-resistant coil heaters.

Strength versus accurate and fast temperature measurement is a balancing act. The factors which tend to produce high strength also tend to reduce the temperature sensors accuracy and speed of response. A properly selected thermowell will balance these opposing factors to produce a design capable of functioning satisfactorily in the intended application. selection.

Heatcon hot air blowers/hot air generators/heater banks are generally used for applications in building or industries to heat air is necessarytemperature to deliver air appropriate quality and temperature for the applications such as central air heating, ventilation and air conditioning. 

In addition these equipment's have a large variety of applications:- Humidity control, freeze protection, heat treating, air pre-heating, and also for application in oven, food processing and several other application where hot air is required. 

PV.SV ON/OFF Controllers

• Available Seven segment display size: 0.3 inch 
• Using 8 seven segment displays 
• First 4 seven segments (Red displays), displays PV(Present Value or process value) 
• Second 4 seven segments (Green displays), displays SV(Set Value or Source value) 
• Available 2 Set value outputs: Relay Output or SSR Output modes 
• Available in 5 Sizes 
• The sensors used in universal: thermocouples (J, K, R, S, T, B, N-Types), and pt-100. 

Heatcon Super High Temperature Furnace Up to 1800, Mufflewhich consists of super high quality alumina fiber brick with ZrO2 liner and Kanthal Super-1900 MoSi2 heating elements which can be used up to 1800degree.

Having an Operation Temperature: 1700°C (1800°C for short time), maximum energy efficiency is achieved by surrounding the chamber with thermal-efficient alumina fiber ceramic insulation. Heavy-duty double layer structure with cooling fan. Lower temperature in outside case.

Heatcon Digital Hygrometer indicates the present temperature and humidity at the the same time On two different displays. Temperature is displayed on the upper LED display(RED) with %inch and humidity on the lower LED display (Green) with % inch Using capacitive sensor as Humidity sensor.

Application : This series of aging test chamber is suitable for the reliability test of industrial products. It has the characteristics of temperature control precision and wide control range. The performance conforms to the criteria GB5170.1.2.5-2017 "High-temperature test equipment for basic parameters verification method of environmental test equipment for electric and electronic products. 

Standard accessories: Sight window*1, cable port(portc1, 50mm)*1, shelves*2, chamber lamp*1, power cable *2m 

Safety device (standard) No fuse breaker, over pressureover heat and over current protection for compressor, Over temp. protect, over load protect of blower, dry heat protection 

Control System Balanced Temperature & Humidity Control System 

Refrigeration system Air Cooled (Water Cooled Type is option) Hermetic compressor, Single stage refrigeration system CFC-Free refrigerant(HFC-507/HFC-23) 

Non contact high temperature infrared sensor/transmitter features a 20 mm OD by 120 mm long stainless steel housing. This mini transmitter is ideal for applications that require measuring temperature in hardtop-reach, confined, or harsh environments. This sensor package comes with al.8 m (6') shielded cable for power and output connections. Models feature industry standard outputs that provide easy interfacing directly to all meters, controllers, data loggers, recorders, computer boards, and PLCs. The adjustable emissivity allows accurate measurement of temperature for different materials having different emissivity. 

Features :

• Sensor and Transmitter combined 
• Packaged into a 20mm OD by 120mm long Stainless Steel Housing
• Emissivity Adjustable
• FT 232 MINI USB PC Interface with software 
• NTC Sensor, Compensated Makes Fast and accurate Measurements 

Features :

• Henix HI-8003-PLR paperless recorders have a built-in display which allows users to quickly review measured data in real time. Ease of use achieved with informational graphics and touch screen displays Personal delivery of process data with customized displays, Batch recording or continuous data,
• Multiple data storage: removable secure digital (SD) port, on-board non-volatile flash, USB flashes storage ports.
• Soft touch allows the operator to scroll back in time and review historical trends.
• This is having internal memory to store the data up to one year.
• Standard RS-232 communication enables users to access onscreen data and setup remote monitoring via the RS seriai interface.
• Touch screen display to enable operators to clearly view process data in different formats
• All have onboard Flash data storage capability and Compact Flash cards for data archiving.
• This device can serve web pages, allowing numerous people to monitor a system remotely.

Non - contact high temperature infrared sensor/transmitter features a 20 mm OD by 120 mm long stainless steel housing. This mini transmitter is ideal for applications that require measuring temperature in hardtop-reach, confined, or harsh environments. This sensor package comes with a1.8 m (6') shielded cable for power and output connections. Models feature industry standard outputs that provide easy interfacing directly to all meters, controllers, data loggers, recorders, computer boards, and PLCs. The adjustable emissivity allows accurate measurement of temperature for different materials having different emissivity. 

Features : This is a compact programmable temperature indicator which can be carried anywhere for measuring temperature ranging from -180°C to +1700°C. This instrument has LCD display for temperature indication. Built in 9V battery and low indication. 

This model is suitable for measuring temperature in molten metals, Ovens, Furnaces, Liquids; Surface temperature etc. These instruments can be supplied as master with NML Calibrations certificate. 

Heatcon ovens upto 450 degree centigrade is used in the below applications:-

Laboratories, plastics, cables, electroplating, hardware, optoelectronics, plastic products, molds, shoe materials, powder coating, printing, medical, scientific research units, colleges and universities, mining, aerospace and research institutions.

Features :-

• Ceramic/glass wool insulation, high thermal efficiency, low heat loss and long life.
• The air circulation with special shaft motor device achieves excellent temperature uniformity.
• Trays and ports to temperature measurements can be customized.
• Intelligent program temperature controller, which is available to edit and save the multi-segment program.
• Data loggers with PC interface.

OUR OTHER INDUSTRIAL OVENS:-

• Rapid quench oven
• Batch oven-drawer type oven
• Conveyor oven
• Batch oven-drawer oven
• Top loading oven
• Lab oven
• Front loading oven

Heatcon temperature -humidity controller not only indicates the present temperature and humidity but also controls both at the the same time.

Features : Temperature is displayed on the upper LED display(RED) with ¥%inch and humidity on the lower LED display (Green) with % inch

Heatcon High Temperature Furnace Up to 1200°C, furnace is divided into two types: medium temperature (Ambient- 950°C) and high temperature (Ambient- 200°C)

Features :-

• High chromium & high manganese steel castings
• Cast iron parts
• Quenching
• Annealing
• Ageing and heat treatment of mechanical parts.
• Research institutes and Labs

Specifications :-

• Fiber ceramic lining, high thermal efficiency, low heat loss and long lifetime.
• The four-side heating device achieves excellent temperature uniformity.
• Build a horizontal silicon carbide plate/high temperature cast steel plate for the trolley.
• Intelligent program temperature controller, which is available to edit and save the multi-segment program.

OUR OTHER INDUSTRIAL FURNACES :-

• Air Circulation Furnaces
• Furnaces with Radiation Heating up to 1400 °C
• Pit-Type and Top-Loading Furnaces with or without Air Circulation, Electrically Heated or Gas-Fired
• Continuous Furnaces, Electrically Heated
• Laboratory Furnaces
• Tube Furnaces
• Bogie Hearth Furnace
• Pit-type Furnace
• Bottom loading furnace
• Crucible furnace

These type of immersion heaters are mostly used in the process industry for heating liquids , heating gases and as tank heaters. Immersion heaters are tubular welded or brazed into a flange. The enclosure can be selected depending upon the applications and can be customized with ANSI standards flanges.