Our Product / Services
Heat Protection Wear
2 Products availableOur Complete range of products are Curtain Detector, ABC Powder Extinguisher, Boundary Guard Post, CO2 VALVE Type Extinguisher and Conventional Panel.
Detector Type
Dual-element low noise pyroelectric sensor.
Range Settings
Long (6 m), Medium (4 m) and Short (2 m).
Internal Battery
3V Lithium battery
Nominal Battery Capacity
1450 mA/h.
Microprocessor
8-bit, low power CMOS.
Alarm Period
Approx. 3 seconds.
Rearm Timer
Rearms the detector 2 minutes after the last alarm.
Transmission Sequence
3 data bursts at variable intervals within 3 Seconds.
Encoding
24-bit ID, over 16 million possible combinations.
Using the wrong extinguisher on a fire can be very dangerous. And often, there isnt enough time to decide which extinguisher to use. In such cases, the consequences often prove fatal.
Ceasefires MAP 90 range of ABC extinguishers are effective against Class A, B and C fires as well as Electrical fires. They take the guesswork and confusion out of choosing an extinguisher and save valuable time in the face of the fatally dangerous enemy called fire.
Ceasefires ABC extinguishers are built for speed, power and reliability. A simple two-step activation mechanism allows you to fight the fire within seconds. 90% concentration of Mono Ammonium Phosphate maximizes the fire fighting power available to you. And stringent quality control and multiple point testing systems ensure that when you are faced with a fire, these extinguishers will deliver.
The 500 gm powder agent fire extinguishers will ensure that you are fully equipped to fight a home fire, if there should be one. These extinguishers are easier to use than others because of their lightweight 'point and shoot' design.
Electric arcs are caused due to breakdowns of a gas, which produces a continuous discharge of plasma. This happens because current is flowing through a medium such as air, which is normally non-conductive.
The arcs are formed in the space between two conductive electrodes which are often made from carbon, and once initiated, will draw current from a fixed-voltage supply until the apparatus is destroyed. Electrical arcs are at temperatures high enough to obliterate most materials.
In the electrical industry the threat of an electric arc flash exposure has necessitated the use of flame resistant clothing. The flame resistant clothing intends to minimize burn injury and provide the worker with some protection after being exposed to an electric arc. Non-flame resistant clothing ignites and dramatically increases the burn injury percentage and severity well beyond that of the initial arc flash exposure.
Ceasefire Arcstar provides permanent flame resistance as it does not melt, ignite or continue to burn.
It uses comfortable fabrics for protection and resists breaking open during exposure.
The suit insulates the wearer from heat & decreases/avoids heat burns, providing protection to escape safely.
We've seen how, in just a matter of seconds, a small fire can grow into a lethal blaze. If you've missed that time window, there's still hope.
Ceasefire's CO2 valve type extinguishers are bigger, pack in tremendous power and are very effective in putting out larger fires.Ceasefire's CO2 valve type extinguishers are available in three variants, with more storage capacity than the regular CO2 extinguisher.
Extremely user friendly, with a protective cover over the valve to avoid the risk of freeze burn, Ceasefire's CO2 valve type extinguishers are the perfect weapon against large, hard to fight B and C Class fires.
Ceasefire brings to you Ceasefire Lancepro. Ceasefire Lancepro is arevolutionary fire fighting system that comes to address some of the biggest challenges faced by anyone fighting a blaze in a building complex.Lancepro can also be used directly in case of open fire, whilst maintain a safe distance from the blaze and protecting the goods from collateral damage.
The innovative Ceasefire Lancepro uses Watermist technology enabling it to be used safely on all types of fires including electrical
fires. Water in mist form also increases the surface area of water many times over facilitating heat absorption and taking the firefighting
power manifold by rapidly bringing down the temperature to below combustible levels and cutting off the oxygen supply.
Having a drill machine along in the Lancepro kit makes it convenient for the fire fighter to douse off the fire in an enclosed area without physically coming in contact with it. A small orifice is all you need to ensure the security of the fire fighter who can quench the fire without actually entering the enclosed space. The drill comes with two bits one for drilling in concrete surface and another for metal surface drilling. Once the opening is made by the drill unit of Lancepro the watermist gun is inserted through the opening and watermist is discharged.The two types of guns specialize in administering watermist into the fire zone from a horizontal (from the wall) and vertical
(from the roof) angle, respectively.
Ceasefire Conventional Fire Alarm system operates over a wide voltage range, enabling connection to Fire and Security systems, and thus minimising the variety of detectors required to fulfil the most demanding applications.
The extensive range provides flexible solutions and features application-specific products that support specialised areas of detection such as Intrinsically Safe (I.S.) and Marine applications.
Approved to European standards (EN54), this environment friendly system promises rapid and reliable installation.
Alarming Level :50 ppm between 60 to 90 mins 100 ppm between 10 to 40 mins 300 ppm less than 3 mins,
Video Mode: NTSC/PAL
O/S: Embedded Linux
Compression:Standard H.264 / ADPCM(Audio)
Video Input: 4Ch
Video Output:Monitor(1 BNC, 1 VGA)
[Speed] Live Display (NTSC/PAL):120fps/100fps
[Speed] Recording (NTSC/PAL):120fps/100fps
Recording Resolution (NTSC/PAL):Full (720 X 480)/Full (720 X 576), Field (720 X 240)/Field (720 X 288), CIF (352 X 240)/CIF (352 X 288)
Live Display:1/4/Sequence
Recording mode:Auto, Continuous, Motion, SensorAudio:Input (1Ch), Output (1Ch)
Microphone:Omni-directional electret
Alarm Duration:4 seconds
RF immunity: 20 V/m, 1 MHz to 1000 MHz
Temperature range: -10 to 50C (14 to 120F)
Minimum:0.3 x 0.6 m (1 x 2') or larger glass thickness
Plate:2.4 to 6.4 mm (3/32 to 1/4")
Tempered:3.2 to 6.4 mm (1/8 to 1/4")
Wired:6.4 mm (1/4")
Laminated:3.2 to 6.4 mm (1/8" to 1/4")
Transmitter's ID Code:24-bit digital word, over 16 million combinations, pulse width modulation.
Overall Message Length:36 bits
Response to Tamper Event:Tamper report every 3 minutes (until the tamper switch is restored).
Contrary to popular belief, most burglaries are not random, unplanned acts. In most cases, the burglar is someone who has observed you over time: a former household help or even your ex-watchman could be a potential threat.
He knows your property, the people in it and in many cases, their routine. As for your valuables, every experienced burglar knows where to find them: drawers, cupboards and safes.
So how can you protect yourself against even the most calculated attack?
With Ceasefires security system you can leave your home confident that a break-in will automatically sound an alarm, activate a response, and inform you via your telephone.
Motion detectors, wired siren, magnetic contacts and curtain detectors alert you the second an intruder breaks in. Flood and smoke detectors alert you in case of flooding and fire. And the central control panel monitors the overall security of your home. This system leaves no corner unguarded.
Transmitter's ID Code
24 bit digital word, over 16 million combinations, pulse width modulation.
Overall Message Length
36 bits
Message Repetition
One-shot transmission (default) or once every 3 minutes (selectable)
Power Source
3V Lithium battery
Current Drain
6A STBY, 17mA average in operation (including LED
Zones Number:28 wireless, 2 hardwired (zones 29 & 30).
Hardwired Zone Requirements:2.2 k E.O.L. resistance (max. resistance of wires 220 ).
Zone Types:Interior follower, interior, perimeter, perimeter follower, delay 1, delay 2, 24h silent, 24h audible, fire, nonalarm, emergency, gas, flood, temperature and interior /perimeter.
Display:Single line, Backlit 16-character LCD.
Alarm Types:Silent alarm, siren alarm or sounder (internal) alarm, in accordance with zone attributes.
Siren Signals:Continuous (intrusion / 24 hours / panic); triple pulse - pause - triple pulse. (fire).
Siren (bell) Timeout:Programmable
InternalSounder Output:At least 85 dBA at 10 ft (3 m)
Supervision:Programmable time frame for inactivity alert
Data Retrieval:Status, alarm memory, trouble, event log.
Compliance with U.S. Standards:Meets FCC Part 15 and Part 68 requirements. Ul1637, UL1635, UL1023, UL985, ULC-S545-02, ULC C1023.
Receiver Type:Super-heterodyne, fixed frequency
Receiver Range:600 ft (180 m) in open space
Antenna Type:Spatial diversity
Coding:PowerCode and/or CodeSecure
Power Supply:Internal switching power supply 100VAC to 240VAC, 50/60 Hz, 0.5A / 12.5 VDC, 1.6A.
Maximum Output Ripple:0.05
Current Drain: Approx. 40 mA standby, 1400 mA at full load and in alarm.
Site External Siren Current (EXT):450* mA max @ 10.5 VDC minimum when powered by AC & DC (battery).
Site Internal Siren Current (INT):450* mA max. @ 10.5 VDC minimum when powered by AC & DC (battery)
PGM Output Current:100* mA max.
Wired Detectors (zones 29 & 30)
Total (Sum) Current: 36* mA max.
High Current / Short Circuit Protection: All outputs are protected (automatic reset fuse).
Total Pro Panel output current: 550 mA.
Loop Driver Card
Battery Supervision
Good battery - LED lights steadily upon transmission /Low attery - LED flickers upon transmission
Coding
28-bit ID, 4-bit function code and 32-bit rolling code
Transmission Duration
Each button press causes transmission for upto 2 seconds
CSEE Excellence is distinguished for its world class standard in emergency evacuation. The premium range boasts high-end technical expertise and uber class designs, making it the perfect blend of form and function.
Every 2mm-thick photoluminescent sign in the Excellence range is UV-resistant. Even in the blackest of smoke, it points you to the nearest fire escape. Available in opaque or transparent acrylic glass and brushed stainless steel variants, the signs stand guard 24x7, guiding you through darkness and dense clouds of smoke so that you reach safety immediately.
The Excellence range promises you only the best designs. Which means it serves without compromising on the beauty of your premise. This dual advantage is what makes the range one of the most sought after emergency evacuation systems ever.
For instance, the Excellence Fire Safety signages give you all the information you need to address the fire immediately. From signage that mark and give you information about the extinguisher, and the kinds of fire it can fight, to signage that guide you to the hosepipe and fire alarm, this series has it all.
While attempting to escape from a fire, there are two things you need protection from. The first is smoke. Toxic and poisonous, smoke inhalation is your first and most critical concern. The second is the fire itself. In order to survive, you must be able to navigate through the fire without sustaining serious burn injuries.
Ceasefires Escape Gear is designed to protect you against these very forces. Each Escape Gear Pack contains two Fire Escape Masks and two Fire Escape Blankets. Together they provide the protection to escape safely from the smoke and fire.
Ceasefire Fire Escape Gear, Mild Steel Box size 425mm 360mm 140mm, Epoxy powder coated to protect it from weathering.
Smoke Hood: Tested to European Standard EN 403: 1993-S, Known to reduce Carbon monoxide, propenl (acrolein), hydrogen chloride, hydrogen cyanide and solid & liquid toxic particles to manageable level for at least 15 minutes, shall withstand temperatures upto 80 Deg, Single Use only.
Fire Blanket Size: 1.2m 1.8m, Used to cover any vessel containing the fire completely, Used to extinguish a clothing fire wrap blanket around victim.
Modulation
ASK (ON-OFF keying)
Transmitter ID
24-bit digital word, over 16 million possible code combinations, pulse width modulation.
Total Message Length 36 bits
Minimum Transmit Duration2 sec
Power Supply:3-volt Lithium cell
The range contained in Ceasefire SEE is comprehensive, covering every possible evacuation need.
For instance, marking strips are critical in areas that need special navigation in the dark, such as around pillars, corners, low-lying or protruding objects, heavy machines etc.
These floor-mounted strips glow brightly, to guide occupants on a safe, obstruction free path to the nearest exit.
Internal Battery:3V Lithium battery, type CR-123A. For UL installations, use Panasonic or Sanyo only.
Transmit Current Drain:20 mA (including LED).
Battery Life (with LED on):Typically over 3 years.
True Motion Event Verification:2 position selector - 1 (OFF) or 2 (ON) motion events.
Alarm Period:3 seconds.
Rearm Timer:Rearms the detector 2 minutes after the last alarm.
Timer disabled in the walk test mode not applicable for the DD243 version (see section 1).
Transmission Sequence:3 data bursts at variable intervals within 3 seconds.
Encoding:24-bit ID, over 16 million possible combinations. Total.
Message Length:36 bits.
Tamper Alert:Reported when a tamper event occurs and in any subsequent message, until the tamper switch is restored.
Supervision Message: Signaling at 60 minutes interval (U.S. version)
15 minute interval (UK version) or according to local standards.
Height:1.8 - 2.4 m (6 - 8 ft). Recommended height up to 2.1 m (7 ft)
Installation Options:Surface or corner
BR-1:Surface mounted swivel bracket, adjustable 30 down and 45 left/45 right, BR-1 with a corner adapter, BR-1 with a ceiling adapter
RFI Protection:>20 V/m up to 1000 MHz.
Operating Temperatures:-10C to 50C (14F to 122F).
Storage Temperatures:-20C to 60C (-4F to 140F).
Compliance with Standards:Designed to meet FCC Part 15 and Directive 1999/5/EC of the European Parliament.
Dimensions (H x W x D):94.5 x 63.5 x 53.0 mm (3-11/16 x 2-1/2 x 2-1/16).
Contrary to popular belief, most burglaries are not random, unplanned acts. In most cases, the burglar is someone who has observed you over time: a former household help or even your ex-watchman could be a potential threat.
He knows your property, the people in it and in many cases, their routine. As for your valuables, every experienced burglar knows where to find them: drawers, cupboards and safes.
So how can you protect yourself against even the most calculated attack?
With Ceasefires security system you can leave your home confident that a break-in will automatically sound an alarm, activate a response, and inform you via your telephone.
Motion detectors, wired siren, magnetic contacts and curtain detectors alert you the second an intruder breaks in. Flood and smoke detectors alert you in case of flooding and fire. And the central control panel monitors the overall security of your home. This system leaves no corner unguarded.
Number of Zones:29 wireless, 1 hardwired (zone No. 30).
Hardwired Zone Requirements:2.2 k E.O.L. resistance (max. resistance of wires 220 ).
Zone Types:Interior, perimeter, delay 1, delay 2, 24 hours - audible, 24 hours - silent, fire, non-alarm and emergency.
User Codes:8 codes, 4 digits each
Data Retrieval:Status, alarm memory, trouble, event log.
Real Time Clock: The control panel keeps and displays time and date.
Compliance with U.S Standards:Meets FCC Part 15 and Part 68 requirements.
Compliance with European Standards:EN 50131-1 Grade II Class II
EMC Emission:EN 50081-1 1992
RFI:EN55022 1998
EMC Immunity:EN 50082-1 1997
EMC Immunity to Conducted RF:EN6100-4-6 1996
Telephony:Telephony: TBR21 1998
Safety:EN60950+ Am1(93), Am2(93), Am3(95), Am4(97)
Receiver Type:Super-heterodyne, fixed frequency
Receiver Range:600 ft (180 m) in open space
Coding:PowerCode and/or CodeSecure
Power Supply :Plug-in transformer.230 VAC, 50 Hz / 9 VAC, 700 mA or 230 VAC, 50 Hz /9 VAC, 1A.
Current Drain:Approx. 95 mA standby, 500 mA at full load and in alarm.
PGM (auxiliary)
Output Current:100 mA max.
Sounder Output Current with 700 mA Transformer :Internal sounder: 50 mA maxExternal sounder:150 mA max
Sounder Output Current with 1A Transformer:Internal sounder: 50 mA max / External sounder: 350 mA max.
Fuse Rating:0.5 A for siren / sounder circuit protection.
Backup Battery :(provides power for at least 4 hours) Option - 7.2 V Nickel-Metal rechargeable battery pack, 1300 mAh.
Built-in Modem:300 baud, Bell 103 protocol
Data Transfer to Local Computer:Via RS232 serial port
Report Destinations: 2 central stations, 4 private telephones
Reporting Format Options:SIA, Pulse 4/21900/1400 Hz, Pulse 4/2 1800/2300 Hz, Contact ID, Pulse Rate: 10, 20, 33 and 40 pps programmable
Message to Private Phones:Tone or voice
Message to Pager:PIN No. * Alarm Type * Zone No.
Operating Temp. Range:32F to 120F (0C to 49C)
FIREscape-20 is an addressable LED-based exit light which is clearly visible up to a distance of 40 metres. The exit light's hinged cup contains the address unit and backup battery. It mounts to the standard YBN-R/3 mounting base.
Ceasefire FIREscape runs on unique addressable technology that allows you to programme, control and test each individual sign in the system.
A graphic interface lets you view the entire system at a glance. If there's a sign that's out of order, you can identify and fix it immediately.
An internal control system has been included with the system to constantly control the condition of the lights, LEDs and batteries.
If necessary, the system will provide specific information on the status, either locally on a keypad or by transferring it to the control centre of the service provider using an IP or GSM network.
In this system, FIREscape-SL (Step-Luminaire) is an LED-based addressable step lighting unit ideal for lighting up stairwells and to indicate changes in floor levels.