We offer a wide range of industrial reverse osmosis Plants, according to We need for tap water, brackish water & sea water application. The production range starts from 100 LPH (Liter per hour) to 100 M3 per hour for 100ppm to 45, 000ppm TDS and reduce TDS @ 95-99% .

All our industrial reverse osmosis Plants are carefully customized and configured to suit the individual requirement of the output water, which varies from normal drinking application to the specific usage, such as food Processing, pharmaceuticals and boiler feeding requirement. This is done through an in depth and complete chemical analysis of the feed water available to us in specific location.

Reverse Osmosis has gained wide acceptance and popularity due to its simple operation and the ability to withstand variations in feed water quality.

• Produce high-quality dematerialized water
• Most modern membrane technology
• Modular design
• Low water-rejection rate
• Low operational and maintenance costs

We are engaged in manufacturing, exporting and supplying excellent quality of Booster Pump, in India.Booster Pump 24/36V Suited for water filter Purifiers for Dolphin, Kent, Grand, P-Top, Compaq, Natural and many RO models can be used in any purifier Model Counter Top, Desk Top, Stand Mounted, Wall Hanging, Under Sink.

Advantage of Hatco Systems pump:-

• Equipped With High Power DC Motor With Low Noise, Low Vibration
• Low Power Dissipation, High Efficiency
• Resistance To Acids, Alkalis And Adhesion & Easily Fixed And Removed
• Excellent Self-Suction Capability, High Precision Ball Bearings
• Totally Inspection Control In Production Process For Electrical, Sealing And Water System

Features:-

• Most Efficient Performing Booster Pump
• Less Vibration
• Long Life with Constant Pressure and Flow
• Very Easily Operated At The Time Of Installation And Service

Hatco, To provide the oxygen source for the biological reaction, a jet aeration manifold with multiple jet nozzle assemblies is connected to a pump and a blower. Each jet has a primary mixing nozzle and an outer secondary nozzle. The tank contents are re-circulated by the pump through the primary mixing nozzle. Low pressure air is mixed with the liquid in the outer secondary nozzle creating fine bubbles. By turning off the blower connected to the airline, Anoxic mixing can be achieved with the same equipment to promote biological nutrient removal. No separate mixer is needed.

Jets have high oxygen transfer and higher alpha values compared to other aeration devices. The design alpha for Hatco jet system is 0.9 with successful installations. Performance data has demonstrated alpha values above 1 in the use of some industrial wastewaters. Jet nozzle gassing rates can vary significantly without major changes in oxygen transfer efficiency. Jets also provide energy efficient off-bottom solids suspension.

Tank liquid is pumped through the liquid line and through the inner nozzle. High velocity is created by the inner nozzle forming a jet plume. Compressed air is forced through the air line into the air transfer duct and then the outer nozzle. The high velocity jet plume from the inner nozzle shears the air in the outer nozzle creating fine bubbles. These bubbles are carried by the jet plume into the tank liquid. As the jet plume disperses and velocity slows. The buoyant force of the bubble causes the bubbles to rise.

Hatco Systems uses a series of controlled complex modulating high frequency waveform that ineffective the bonding ability of minerals that are contained in our water. This field effectively control & prevent different size molecules likely to form scale & to break the bonds between molecules & the water. This results the break down of large mineral crystals into tiny mineral particles & then prevent them from reacting with other minerals or bonding to any surface to from scales. The process is so effective that existing scales are progressively broken down & flushed away in due course of time. The conditioned and treated liquid ions results in non-corrosive & best solvent water. It also helps the plants to grow well & healthy.Electro-magnetic treatment is based on the principal of creating an Oscillating field of energy with the use of high frequency radio or square waves.The device produce a unique square wave current that sweeps all the frequency responses from 1000 to 15000 HZ at a rate of 10 times a second.When the strength of the oscillating field varies with time and changes direction an induced current is produced inside the pipe line, this is also known as FARADAYS law of induction.

As soon as the water pass through the device or softener, a certain in type of electro-magnetic field in developed in the machine and as a result of that two types of processes are done.

During this process high mineral clusters of any size are being broken down into small and tiny particles and scattered. E.g . If any of the mineral ion in the water is in size of 40 micron, then it will be broken down and converted into 10 tiny parts of 4 micron and making them more bion-available.

This process is very important in water. When minerals are being broken down and converted in to small and tiny particles, because of that nature of water molecules to travel together and sticking to each other or developing cluster are being ruined and transformed in to 100% non-sticking nature. Like that they cannot travel together or develop any cluster or layer in to water. Nature of water is changed. So with the help of join process of this device hard water is turned into Best Solvent compared to non treated water. This is the only technology which does not remove useful and essential minerals/nutrient ions from water, but treat them and make them more bion-available.

We offer a wide range of industrial reverse osmosis Plants, according to We need for tap water, brackish water & sea water application. The production range starts from 100 LPH (Liter per hour) to 100 M3 per hour for 100ppm to 45, 000ppm TDS and reduce TDS @ 95-99% .

All our industrial reverse osmosis Plants are carefully customized and configured to suit the individual requirement of the output water, which varies from normal drinking application to the specific usage, such as food Processing, pharmaceuticals and boiler feeding requirement. This is done through an in depth and complete chemical analysis of the feed water available to us in specific location.

Reverse Osmosis has gained wide acceptance and popularity due to its simple operation and the ability to withstand variations in feed water quality.

• Produce high-quality dematerialized water
• Most modern membrane technology
• Modular design
• Low water-rejection rate
• Low operational and maintenance costs

We are engaged in manufacturing, exporting and supplying excellent quality of Booster Pump, in India.Booster Pump 24/36V Suited for water filter Purifiers for Dolphin, Kent, Grand, P-Top, Compaq, Natural and many RO models can be used in any purifier Model Counter Top, Desk Top, Stand Mounted, Wall Hanging, Under Sink.

Advantage of Hatco Systems pump:-

• Equipped With High Power DC Motor With Low Noise, Low Vibration
• Low Power Dissipation, High Efficiency
• Resistance To Acids, Alkalis And Adhesion & Easily Fixed And Removed
• Excellent Self-Suction Capability, High Precision Ball Bearings
• Totally Inspection Control In Production Process For Electrical, Sealing And Water System

Features:-

• Most Efficient Performing Booster Pump
• Less Vibration
• Long Life with Constant Pressure and Flow
• Very Easily Operated At The Time Of Installation And Service

Hatco, To provide the oxygen source for the biological reaction, a jet aeration manifold with multiple jet nozzle assemblies is connected to a pump and a blower. Each jet has a primary mixing nozzle and an outer secondary nozzle. The tank contents are re-circulated by the pump through the primary mixing nozzle. Low pressure air is mixed with the liquid in the outer secondary nozzle creating fine bubbles. By turning off the blower connected to the airline, Anoxic mixing can be achieved with the same equipment to promote biological nutrient removal. No separate mixer is needed.

Jets have high oxygen transfer and higher alpha values compared to other aeration devices. The design alpha for Hatco jet system is 0.9 with successful installations. Performance data has demonstrated alpha values above 1 in the use of some industrial wastewaters. Jet nozzle gassing rates can vary significantly without major changes in oxygen transfer efficiency. Jets also provide energy efficient off-bottom solids suspension.

Tank liquid is pumped through the liquid line and through the inner nozzle. High velocity is created by the inner nozzle forming a jet plume. Compressed air is forced through the air line into the air transfer duct and then the outer nozzle. The high velocity jet plume from the inner nozzle shears the air in the outer nozzle creating fine bubbles. These bubbles are carried by the jet plume into the tank liquid. As the jet plume disperses and velocity slows. The buoyant force of the bubble causes the bubbles to rise.

Hatco Systems uses a series of controlled complex modulating high frequency waveform that ineffective the bonding ability of minerals that are contained in our water. This field effectively control & prevent different size molecules likely to form scale & to break the bonds between molecules & the water. This results the break down of large mineral crystals into tiny mineral particles & then prevent them from reacting with other minerals or bonding to any surface to from scales. The process is so effective that existing scales are progressively broken down & flushed away in due course of time. The conditioned and treated liquid ions results in non-corrosive & best solvent water. It also helps the plants to grow well & healthy.Electro-magnetic treatment is based on the principal of creating an Oscillating field of energy with the use of high frequency radio or square waves.The device produce a unique square wave current that sweeps all the frequency responses from 1000 to 15000 HZ at a rate of 10 times a second.When the strength of the oscillating field varies with time and changes direction an induced current is produced inside the pipe line, this is also known as FARADAYS law of induction.

As soon as the water pass through the device or softener, a certain in type of electro-magnetic field in developed in the machine and as a result of that two types of processes are done.

During this process high mineral clusters of any size are being broken down into small and tiny particles and scattered. E.g . If any of the mineral ion in the water is in size of 40 micron, then it will be broken down and converted into 10 tiny parts of 4 micron and making them more bion-available.

This process is very important in water. When minerals are being broken down and converted in to small and tiny particles, because of that nature of water molecules to travel together and sticking to each other or developing cluster are being ruined and transformed in to 100% non-sticking nature. Like that they cannot travel together or develop any cluster or layer in to water. Nature of water is changed. So with the help of join process of this device hard water is turned into Best Solvent compared to non treated water. This is the only technology which does not remove useful and essential minerals/nutrient ions from water, but treat them and make them more bion-available.