Our Products
Sealing & Strapping Machines
1 Products availableFilling Machines
1 Products availableLiquid Filling Machinery
1 Products availableOur product range contains a wide range of Linear Bottle Washing Machine, SEMI AUTOMATIC ROTARY BOTTLE WASHING MACHINE, Liquid Bottle Filling Machine and Volumetric Liquid Bottle Filling Machine
Harsiddh Engineering manufactures top quality Linear Bottle Washing Machine for smooth and perfect operation. Their linear bottle washing equipment features six internal zones for washing available with 60 and 120 jets. The machine is quite strong with contact parts manufactured from SS316-grade materials. Other than that, the main machine is constructed from SS304 materials. You can use this tool for washing bottles of approximately 10 to 200ml measurements. Additionally, the machine is also attached with 2tanks and pumps, thus offering smooth operations. Our machines have CE certifications.
One of the most beneficial features of the machine is that its washing order and sequence entirely depend on customer needs. Additionally, the independent cleaning zones ensure zero contamination. The device exhibits a water-consumption capacity of 500 to 700 liters per hour. With this equipment, you will have the opportunity of distinguishing five different washing zones. Power consumption of the equipment is 5.0HP, which makes it energy efficient and low-power consuming. The machine is also capable of producing 240 bottles in a minute and works on the linear cleaning mechanism.
With intermittent systems for washing bottles, this particular device provides a pristine clean washing experience. Automatic infeed and exit options offer complete freedom of operations. With air consumption of 25 to 30 CFM, the device happens to be the best choice for flat as well as round bottles.
Silent Features
Model No. | HLBW-120 | HLBW-240 |
Output / Hour | 7000 / Hour (Depend on size) | 14000 / Hour (Depend on size) |
Direction | Linear Tunnel Type | Linear Tunnel Type |
Bottle Dia. | Dia. 32mm to 60mm & 38mm to 180mm in Height | Dia. 32mm to 60mm & 38mm to 180mm in Height |
Bottle sizes | 10ml to 200ml | 10ml to 200ml |
Contact Parts | Stainless Steel 316L | Stainless Steel 316L |
Air Consumption | 12 to 15 CFM | 12 to 15 CFM |
Washing Zone | 5 Zone Or can be set as per customer require sequences | 5 Zone Or can be set as per customer require sequences |
Pumps & Water Tank | 2 Nos. Each having 6000 Litre / hour capacity & Centrifugal Pumps | 2 Nos. Each having 6000 Litre / hour capacity & Centrifugal Pumps |
Electrical Input | 380 V, 3 Phase, 50 Hz, 4 wire | 380 V, 3 Phase, 50 Hz, 4 wire |
Power Requirements | 4 H.P. For Main Machine | 5 H.P. For Main Machine |
Utilities | Fresh Water, DM Water, WFI, Air – 30 CFM |
Fresh Water, DM Water, WFI, Air – 30 CFM |
Working Height | 850 to 950mm adjustable | 850 to 950mm adjustable |
Dimension | 2700mm (L) X 1400mm (W) X 1550mm (H) | 3180mm (L) X 2500mm (W) X 1650mm (H) |
Harsiddh semi-automatic rotary bottle washing machine is designed very compact on vibration free platform for easy operation. We are a leading manufacturer and supplier of wide array of bottle washing machines, which follow GMP norms and used in bottle cleaning process. The bottle washer is made from stainless steel 304 to define rotary platform, flow regulators, bottle holder cups, solenoid valve, pressure meter and specifically designed with Geneva mechanism.
Rotary Bottle Washing Machine held specific loading and unloading for easy operation. The panel control system is given separately to avoid electrical disturbances. Stationary nozzles are used to prevent any sort of contamination. The machine can be used for four inner and one outer wash. Our machines have been introduced after in depth research to ensure the containers aseptic and sterilized before filling. Our rotary bottle washers are CE certified.
Silent Features
Production Rate | 60 to 100 Containers/Min. | ||
Input Specification | Container Dia.: 25mm to 100mm | ||
Power Specification | 1 H.P., 3 Phase, 4 Wire System, 50 Hz | ||
Optional Accessories | 2 Pumps – Pumping Station | Electric Heater Tank | |
Utility | Fresh Water: 900 Liters/Hour | DM Water 300 Liters/ Hours | Air 30 CFM @ 5 bar (5 Wash) |
Overall Dimension | 1550 mm (L) X 1700 mm (W) X 1300 mm (H) Net Weight: 750 Kgs. Gross Weight: 1000 Kgs. |
Harsiddh Monoblock liquid bottle filling and capping machine incorporates two packaging operations in a single stage and is therefore more economical, versatile and suitable for busy production centers. They have high production output that ranges between 30 -100 bottles per minute depends on the type of model selection and can fill containers ranging from 30-1000ml.
The operation of the machines starts with unscrambling of the bottles in a round turn table before they are feed to a conveyor for filling. The filling stage has nozzles with self centering devices that are plunged to container and achieve very accurate fill. Foam free filling is achieved using nozzles that rise up during the operation. Our equipments follow the international standards and have CE certification.
The equipment is assembled from high quality materials such as SS 316 for all contact parts and SS 304 for other parts. The machine uses modern control technologies that implement no bottleno filling and no capsno capping system. In addition, the motor has variable speed control and all parts are driven by a single motor. After filling, the bottle passes to the capping section where they are sealed. Special flow meters are used to record the fluid flow while other sensors record the number of bottles.
Silent Features
Model No. | HMBLF- 2X1 (2 Head Filling & 1 Head Capping) | HMBLF-4X1 (4 Head Filling & 1 Head Capping) | HMBLF-4X4 (4 Head Filling & 4 Head Capping) |
Filling type | Volumetric Piston Pump | Volumetric Piston Pump | Volumetric Piston Pump |
Output Per Hour | 1500 to 2000 / hour (Depend on size) | 2500 to 4500 / hour (Depend on size) | 2500 to 5000 / hour (Depend on size) |
Direction of Movement | Left To Right | Left To Right | Left To Right |
No. Of Filling Head Syringe / Pump | Two | Four | Four |
No. Of Capping Head | One | One | Four |
Filling Size | 10ml to 1000ml | 10ml to 1000ml | 10ml to 1000ml |
Power Consumption | For Main Machine – 2 H.P. / 415 V/ 3 Phase, 50Hz | For Main Machine – 3 H.P. / 415 V/ 3 Phase, 50Hz | For Main Machine – 4 H.P. / 415 V/ 3 Phase, 50Hz |
For Conveyor – 0.25 H.P. / 415 V/ 3 Phase, 50Hz | For Conveyor – 0.25 H.P. / 415 V/ 3 Phase, 50Hz | For Conveyor – 0.25 H.P. / 415 V/ 3 Phase, 50Hz | |
Conveyor Height | 800 to 900 adjustable | 800 to 900 adjustable | 800 to 900 adjustable |
Container Dia. | Dia. 28mm to 100mm (Round shape) | Dia. 28mm to 100mm (Round shape) | Dia. 28mm to 100mm (Round shape) |
Container Height | 50mm to 250mm | ||
50mm to 250mm | 50mm to 250mm | ||
Dimensions | 2450mm X 1000mm | 2700mm X 1000mm | 3250mm X 1000mm |
Weight | 750 Kgs | 850 Kgs | 1550 Kgs |
Most pharmaceuticals, food and beverage as well as agrochemicals are packaged in their fluid form. In order to serve these manufacturers with cutting edge filling technologies, Harsiddh engineering Co has introduced a wide range of volumetric liquid bottle filling machine with advanced capabilities.
The machine is suitably manufactured for on-line operation and can receive bottles, fill them before pushing them to sealing section. The well designed operation process starts with unscrambling of bottles, feed them through a conveyor where standard filling nozzles with pneumatic and mechanical stoppers pours a calibrated amount of liquid to round or pet bottles. The nozzles are specially designed to center the bottles on filling as well as gradually go up during filling to avoid bubble formation. Our volumetric liquid bottle filling machines have CE certification.
These machines are designed for high productivity throughput, durability, high accuracy filling and long service life. The production throughput depends on the model with HLBF-60 having two heads and filling 30 -50 BPM, HLBF-100 having four heads and filling 40 -80 BPM, HLBF-150 having six heads and filling 40 -120 BPM, HLBF-200 having eight heads and filling 60 -150 BPM and HLBF-250 having two heads and filling 80 -200 BPM. The bottles vary from 0.5 ml to 1000ml.
These machines are designed to cGMP model with advanced sensor and control systems to prevent spillage when there is no bottle. Parts in contact with bottle are manufactured from AISI 316 while non contact ones are made of SS 304 and nickel plated mild steel.
Salient Features