GST : 27ACUPC0475F1ZK
Verified
Write a Review
Our Product / Services
We offer the best product range of Aluminum Alloy 2014, Aluminum Alloy 2017, Aluminum Alloy 5052, Aluminum Alloy 6061 and Aluminum Alloy 7075.
Aluminium Aluminium Alloy 201414 round bars UNS A92014 Wr No. 3.1255 contain Copper 3.90-5.00%, Manganese 0.40-1.20%, Nickel 0.00-0.10%, Silicon 0.50-0.90% which is commonly used in various daily applications such as military vehicles and bridges, forgings for trucks and machinery (hydraulic etc.). Weapons manufacture, structural applications. Aluminium Aluminium Alloy 201414 in the annealed condition can be strengthened further by relatively low temperature heat treatment. Aluminium Aluminium Alloy 201414 bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Aluminium Aluminium Alloy 201414 round bars along in types of Aluminium Aluminium Alloy 201414 bright round bars, Aluminium Aluminium Alloy 201414 hexagonal bars, Aluminium Aluminium Alloy 201414 square bars, Aluminium Aluminium Alloy 201414 hex bars, Aluminium Aluminium Alloy 201414 flat bars, Aluminium Aluminium Alloy 201414 threaded bars and Aluminium Aluminium Alloy 201414 forged bars. All the Aluminium Aluminium Alloy 201414 bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-2008 we export Aluminium Aluminium Alloy 201414 rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.
Types of Aluminium Alloy 2014 bars we stock:
Application of Aluminium Alloy 2014 round bars:Military vehicles and bridges, forgings for trucks and machinery (hydraulic etc.)
Aluminium Aluminium Alloy 201714 round bars UNS A92017 WR NO. 3.1325 contain Copper 3.90-5.00%, Manganese 0.40-1.20%, Nickel 0.00-0.10%, Silicon 0.50-0.90% which is commonly used in various daily applications such as military vehicles and bridges, forgings for trucks and machinery (hydraulic etc.). Weapons manufacture, structural applications. Aluminium Aluminium Alloy 201714 in the annealed condition can be strengthened further by relatively low temperature heat treatment. Aluminium Aluminium Alloy 201714 bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Aluminium Aluminium Alloy 201714 round bars along in types of Aluminium Aluminium Alloy 201714 bright round bars, Aluminium Aluminium Alloy 201714 hexagonal bars, Aluminium Aluminium Alloy 201714 square bars, Aluminium Aluminium Alloy 201714 hex bars, Aluminium Aluminium Alloy 201714 flat bars, Aluminium Aluminium Alloy 201714 threaded bars and Aluminium Aluminium Alloy 201714 forged bars. All the Aluminium Aluminium Alloy 201714 bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-2008 we export Aluminium Aluminium Alloy 201714 rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.
Types of Aluminium Alloy 2017 bars we stock:
Application of Aluminium Alloy 2017 round bars:Manufacture of screw machine products and fittings, pulleys, gauges, coat hangers, and in crochet and knitting needles.
Aluminum 5052 is one of the higher strength non-heat treatable alloys (Annealed it is stronger than 1100 and 3003). Alloy 5052 has excellent characteristics with a high fatigue strength it is used for structures which are subject to excessive vibrations. As 5052 also has excellent corrosion resistance, especially in marine atmospheres and is therefore commonly used in boats, marine components, fuel and oil tubing.
Specifications
Stock Availability Of Contact Sales
| Alloy Designation | UK Specifications |
US Federal Specifications |
| 5052A95052 | AMS 4004 5052 Strain Hardened Foil AMS 4015 5052-T0 Sheet, Plate and Foil AMS 4016 5052-H32 Sheet, Plate and Foil AMS 4017 5052-H34 Sheet, Plate and Foil AMS 4069 5052-0 Tube Drawn Seamless Close Tols AMS 4070 5052-0 Tube Drawn Seamless AMS 4071 5052-0 Tube Drawn Seamless Hydraulic AMS 4114 5052-TF Bar, Rod Rolled or Cold Finish AMS 4175 5052 Honeycomb Core (use AMS 4348) AMS 4348 5052 Core Honeycomb |
QQ-A-225/7 5052 Cold finished bar QQ-A-250/8 5052-0 Sheet and plate QQ-A-250/8 5052-H32 Sheet and plate QQ-A-250/8 5052-H34 Sheet and plate WW-T-700/4 5052 Seamles |
Technical Data Sheet
| Chemical Composition Limits | |||||||||
| Weight % | Al | Cu | Si | Fe | Mn | Mg | Zn | Cr | Others |
| 5052 | Bal | 0.10 max | 0.25 max | 0.40 max | 0.10 max | 2.2 / 2.8 | 0.10 max | 0.15 / 0.35 max | 0.05 max (each) 0.15 (total) |
Typical Mechanical Properties
| Material | Temper | Tensile Strength (ksi) | Yield Strength (ksi) | Elongation % in 2" | min bend radius (90° cold forming) |
| 5052 Sheet 0.064" thick |
5052-0 | 25-31 | 9.5 | 19 | 0 |
| 5052 Sheet 0.064" thick |
5052-H32 | 31-38 | 23 | 7 | 1t |
| 5052 Sheet 0.064" thick |
5052-H34 | 34-41 | 26 | 6 | 1 1/2 t |
Aluminium Alloy 6061 Sheet, Plate, Wire, Rod, Bar, Tube and extrusions. 6061 Foil (Shim) is available in various thicknesses
Aluminum 6061 is an extremely versatile heat treatable aluminum alloy. 6061 has a wide range of mechanical and corrosion resistance properties as well as having most of the good qualities of aluminum. 6061 is used in a many applications from aircraft structures, yacht construction, truck bodies, bicycle frames to screw machine parts.
Specifications
Stock Availability Of Contact Sales
| Alloy Designation | UK Specifications |
US Specifications |
US Federal Specifications |
European Specifications |
Other |
| 6061A96061A86061 | BS L117 Alloy 6061 Tube Drawn T6 BS L118 Alloy 6061 Tube Drawn T6 Hydraulically Tested H20 HE20 6061 Extrusions HP20 6061 Plate HS20 6061 Sheet |
AMS 4009 6061-0 Foil AMS 4021 6061-0 Alclad Sheet and Plate AMS 4022 6061 Alclad Sheet and Plate Cancelled AMS 4023 6061 Alclad Sheet and Plate Cancelled AMS 4025 6061-0 Sheet and Plate AMS 4026 6061-T4 Sheet T451 Plate AMS 4027 6061-T6 Sheet and T651 Plate AMS 4053 6061 Cancelled AMS 4079 6061-0 Tube Drawn Seamless Close Tolerence AMS 4080 6061-0 Tube Drawn Seamless AMS 4081 6081-T4 Tube Drawn Seamless Hydraulic AMS 4082 6061-T6 Tube Drawn Seamless AMS 4083 6061-T6 Tube Drawn Seamless Hydraulic AMS 4091 Superseded by AMS 4081 AMS 4092 Superseded by AMS 4082 AMS 4093 Superseded by AMS 4083 AMS 4113 6061-T6 Extruded shapes AMS 4115 6061-0 Cold finished bars, rod, wire AMS 4116 6061-T4 Cold finished bars, rod, wire AMS 4117 6061-T6/T651 Cold finished bars, rod, wire AMS 4127 6061-T6 Forgings Rolled or Forged AMS 4128 6061-T451 Bars Rolled or Forged AMS 4129 6061-T651 Superseded by 4117 AMS 4146 6061-T4 Forgings AMS 4150 6061-T6 Extrusions and Rings AMS 4160 6061-0 Extrusion AMS 4161 6061-T4 Extrusion AMS 4172 6061-T4511 Extrusion AMS 4173 6061-T6511 Extrusion |
QQ-A-225/7 5052 Cold finished bar QQ-A-250/8 5052-0 Sheet and plate QQ-A-250/8 5052-H32 Sheet and plate QQ-A-250/8 5052-H34 Sheet and plate WW-T-700/4 5052 Seamless tubeQQ-A-200/8 6061-T6/T6511 Extruded bar, tube, section QQ-A-200/16 6061-T6 extruded stuctural shapes QQ-A-225/8 6061-T6 / T651 Cold finished bar, tube, section QQ-A-250/11 6061 Sheet and Plate WW-T-700/6 6061-T6 Seamless, drawn tube MIL-T-7081 6061-T6 Hydraulic tube QQ-A-367 6061 Forgings |
Werkstoff 3.3211 Werkstoff 3.3214 EN 2392 6061-T6 Tube EN 2694 6061-T6 Sheet, strip EN 3341 6061-T4 Sheet, strip EN 3342 6061-T4 Extruded bar EN 3557 EN 4213 6061-T651 Plate |
AWCO-22 Birmetal-016 BA22 Duricilium-Q Hiduminium-43 LA 380 ABM 2-3023 ABM 2-3025 ABM 2-3026 ABS 5144 ABS 5151 BACM 123 BACM 171 6061-0 Tube A-GSUC L-3453 ASN-A-3277 NCT 15-238-01 AIR 9048.210 6061-0 Sheet AIR 9048.220 6061-T4 Sheet AIR 9048.230 6061-0 Sheet AIR 9048.240 6061-T6 Sheet AIR 9049 |
Technical Data Sheet
| Chemical Composition Limits | |||||||||||
| Weight % | Al | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Other Each | Others Total |
| 6061 | Bal | 0.40 - 0.80 | 0.70 max | 0.15-0.40 | 0.15 | 0.8-1.2 | 0.04-0.35 | 0.25 max | 0.15 max | 0.05 max | 0.15 max |
Typical Mechanical Properties 01
| Material | Temper | Diameter (in) | Tensile Strength (ksi) | Yield Strength (ksi) | Elongation |
| Alloy 6061 Bar Cold Finished |
T651 | All | 42 | 35 | 10 |
| Alloy 6061 Bar Cold Finished |
T6511 | <0.25" | 38 | 35 | 8 |
| Alloy 6061 Bar Cold Finished |
T6511 | >0.25" | 38 | 35 | 10 |
| Alloy 6061 Bar - T651 / T6 condition and extruded T6511/T6 | |||||
T Typical Mechanical Properties 02
| Material | Thickness (in) | Tensile Strength (ksi) | Yield Strength (ksi) | Elongation |
| Alloy 6061 Sheet T6 | 0.020-0.500 | 42 | 35 | 10 |
| Alloy 6061 Sheet T6 | 0.500-1.000 | 42 | 35 | 9 |
| Alloy 6061 Sheet T6 | 1.00-2.00 | 42 | 35 | 8 |
| Alloy 6061 Sheet T6 | 2.00-4.00 | 42 | 35 | 6 |
| Alloy 6061 Sheet T6 | 4.00-6.00 | 40 | 35 | 6 |
Aluminium Alloy 7075 is available in Bar, Sheet, Plate, Strip, Forging Stock and Tube. View stock list for further information, Sheet Stock, Plate
Specifications
Stock Availability Of Contact Sales
| US Specifications |
US Federal Specifications |
European Specifications |
Other |
| AMS 4038 7075-T651 Superseded by AMS 4045 AMS 4039 7075-T651 Superseded by AMS 4049 AMS 4044 7075 -0 Sheet and Plate AMS 4045 7075-T6 Sheet and T651 Plate AMS 4046 7075-T6 Alclad one side Sheet, T651 Plate AMS 4048 7075-T0 Alclad Sheet and Plate AMS 4049 7075 -T6 Alclad Sheet and T651 Plate AMS 4078 7075-T351 Plate AMS 4122 7075-T6 Cold finished rod, bar, wire AMS 4123 7075-T651 Cold finished bar, rod AMS 4124 7075-T7351 Cold finished bar, rod, wire AMS 4126 7075-T6 Forgings AMS 4131 7075-T74 Forgings AMS 4139 7075 Forgings (Non-Current) AMS 4141 7075-T73 Die Forgings AMS 4147 7075-T7352 Forgings AMS 4154 7075-T6 Extrusions AMS 4166 7075-T73 Extrusion AMS 4167 7075-T73511 Extrusions AMS 4168 7075-T6511 Extrusions Unstraightened AMS 4169 7075-T6511 Extrusions Straightened AMS 4174 7075-T73 Flash Welded Rings AMS 4186 7075-TF Cold finished bar, rod, wire AMS 4187 7075-0 Cold finished bar, rod, wire |
QQ-A-250/13 7075-0 Alclad sheet and plate QQ-A-250/13 7075-T6 Alclad sheet and plate QQ-A-250/18 7075-0 Clad one side, sheet and plate QQ-A-250/18 7075-T6 Clad one side, sheet and plate QQ-A-250/24 7075-T7651 Plate QQ-A-250/25 7075 Sheet, clad with7072-T76 QQ-A-250/26 7075 Sheet, clad with7011-T76 QQ-A-367 Alloy 7075-T6 Forgings MIL-A-22771 |
EN 2127 | AIR 9048.690 7075-T7351 Plate AIR 9048.700 7075-T7351 Plate AIR 9048.710 7075-T7351 Plate AIR 9049 |
Technical Data Sheet
| Chemical Composition Limits | |||||||||||
| Weight % | Al | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Others Each | Others Total |
| 7075 min | Rem | - | - | 1.2 | - | 2.1 | 0.18 | 5.1 | - | - | - |
| 7075 max | Rem | 0.4 | 0.5 | 2 | 0.3 | 2.9 | 0.28 | 6.1 | 0.2 | 0.05 | 0.15 |
Typical Mechanical Properties
| Material | Temper | Size (") | Tensile Strength (ksi) | Yield Strength (ksi) | Elongation % in 2" |
| Alloy 7075 Bar | T651 | - | 77 | 66 | 7 |
| Alloy 7075 Bar | T7351 | <4" | 68 | 56 | 10 |
| Alloy 7075 Bar | T7351 | <4" | 68 | 56 | 10 |
| Alloy 7075 Bar | T73511 | <0.25 | 68 | 58 | 7 |
| Alloy 7075 Bar | T73511 | 0.25 - 1.5 | 70 | 61 | 8 |
| Alloy 7075 Bar | T73511 | 1.5 - 3.0 | 69 | 59 | 8 |
| Alloy 7075 Bar | T6511 | <0.25 | 78 | 70 | 7 |
| Alloy 7075 Bar | T6511 | 0.25 - 0.5 | 81 | 73 | 7 |
| Alloy 7075 Bar | T6511 | 0.5 - 3.0 | 81 | 72 | 7 |
| Material | Temper | Size (") | Tensile Strength (ksi) | Yield Strength (ksi) | Elongation % in 2" |
| Alloy 7075 Sheet | T6 Bare | 0.125 - 0.25 | 78 | 69 | 8 |
| Alloy 7075 Sheet | T651 Bare | 0.25 - 0.50 | 78 | 67 | 9 |
| Alloy 7075 Sheet | T651 Bare | 0.5 - 1.0 | 78 | 68 | 7 |
| Alloy 7075 Sheet | T6 Clad | 0.188 - 0.25 | 75 | 64 | 8 |
| Alloy 7075 Sheet | T651 Clad | 0.25 - 0.50 | 75 | 65 | 9 |
| Alloy 7075 Sheet | T651 Clad | 0.5 - 1.00 | 78 | 68 | 7 |
Typical Physical Properties
| Characteristic | English | Metric |
| Nominal Density (68° F / 20°C) | 0.101 lbs./ in ³ | 2.80 Mg/m³ |
| Melting Range | 990° F - 1175° F | 532°C - 635 °C |
| Specific Heat (212 °F / 100°C | 0.23 BTU/lb - °F | 960 J/kg-°K |
Types of SMO 254 bars we stock:
Application of SMO 254 round bars:Petroleum production, Saltwater handling, Food and chemical processing equipment, Pulp mill bleach systems, Flue gas desulphurization scrubbers, Tall oil distillation columns, Offshore oil & gas production equipment, Desalination equipment.
Types of Alloy 20 bars we stock:
Application of Alloy 20 round bars:Chemical and allied industries, Food and dye production, Heat exchangers, Explosives, Tanks, Valves, Pickling racks, Manufacture of synthetic rubber and plastics, Pharmaceuticals, SO2 scrubbers and other severe environment
Types of Nickel Alloy 205 bars we stock:
Application of Nickel Alloy 205 round bars:Chemicals, Fats, & Fertilizers, Sugar Mills & Distilleries, Cement Industries, Ship Builders, Paper Industries, Pumps, Petrochemicals, Oil & Natural Gas Organization in terms of the specific materials, Technology.
Types of Incoloy Alloy 330 bars we stock:
Application of Incoloy Alloy 330 round bars:Furnace containers-carburizing, carbonitriding, annealing malleablizing, Muffles, retorts, Bar frame heat treating baskets, Quenching fixtures, Radiant tubes, Salt pots, Furnace fans and shafts, Conveyors, Tube hangers for crude oil heaters and steam boilers, Heat exchangers, Flares.
Types of Monel Alloy 405 bars we stock:
Application of Monel Alloy 405 round bars:Chemical and petrochemical processing, in power plants for super-heater and re-heater tubing, in industrial furnaces, and for heat treating equipment
Types of Cupro Nickel 70-30 bars we stock:
Application of Cupro Nickel 70-30 round bars:Desalination units, Hydraulic lines, Fish cages for aquaculture, Heat exchangers and condensers, Sea water pipework, Offshore fire water systems, Tubes for power plants and ships, Pumps, valves, sheathing and fittings for ship hulls.
Types of Permalloy 50 bars we stock:
Application of Permalloy 50 round bars:Used for magnetic core material in electrical and electronic equipment, and also in magnetic shielding to block magnetic fields.
Types of Permalloy 80 bars we stock:
Transformer cores, Telephone and recording devices, Protecting sensitive medical equipment in an MRI facility, Increasing the quality of home theatre systems, Protecting electrical components from stray magnetic fields, Tape wound toroid’s and lamentations where compactness and weight factors are important.
Types of Super Invar bars we stock:
Application of Super Invar round bars:Structural components for supports and substrates in optical and laser systems requiring precision measurements.
Types of Elgiloy Alloy bars we stock:
Application of Elgiloy Alloy round bars:Used in industries including Oil & Gas, Medical & Dental, Aerospace, Nuclear, Power Generation, Automotive and Chemical Engineering.
Types of Nitronic Alloy 50 bars we stock:
Application of Nitronic Alloy 50 round bars:Turbine blades, hot working tools, exhaust re-heaters, disc and high-temperature springs.
Types of Nitronic Alloy 60 bars we stock:
Application of Nitronic Alloy 60 round bars:Fasteners, Pins and bushings, Wear rails, Roller bearings, Pump components, Valve Stems, Seats and Trim, Fastening Systems, Screening, chain-drive Systems, Pins, Bushings and Roller Bearings, Pump Components (Wear Rings and Lobes).
Types of Inconel Alloy 725 bars we stock:
Application of Inconel Alloy 725 round bars:Hangers, landing nipples, side pocket mandrels, stem and bodies of special and subsea valves, polished bore receptacles in sour gas service, fasteners in marine applications and blades and critical components of steam and gas turbines.
Types of Incoloy Alloy 800H bars we stock:
Application of Incoloy Alloy 800H round bars:Industrial, furnace components and equipment, Petrochemical and chemical processing, Equipment for Heat-Treating, Pressure vessels and heat exchangers, Hydrocarbon cracking.
Types of Incoloy Alloy 800HT bars we stock:
Application of Incoloy Alloy 800HT round bars:Chemical and petrochemical processing, in power plants for super-heater and re-heater tubing, in industrial furnaces, and for heat treating equipment.
Types of Incoloy Alloy 925 bars we stock:
Application of Incoloy Alloy 925 round bars:Valves, hangers, packers, and tubular for sour gas production, Marine fasteners and pump shafts.
Types of Incoloy Alloy 945 bars we stock:
Application of Incoloy Alloy 945 round bars:Surface gas well components such as tubular products, valves, hangers, landing nipples, tool joints and packers as well as fasteners, pump shafting and high strength piping and hardware.
Types of Rene 41 bars we stock:
Application of Rene 41 round bars:Hot components for jet engines, rocket engines, turbine blades, turbine wheels, torque rings, bolting, springs and much more.
Types of Titanium Grade 9 bars we stock:
Application of Titanium Grade 9 round bars:Chemical Processing, Desalination, Power generation.
Types of Alloy 42 bars we stock:
Application of Alloy 42 round bars:Semiconductor lead frames in integrated circuits, bi-metal thermostat strip, thermostat rods, for ceramic-to-metal seals with alumina ceramics, and various glass-to-metal seals such as the core of copper-clad wire for sealing into glass envelopes of electric bulbs, radio valves, television tubes, and fluorescent lights.
Types of Alloy 48 bars we stock:
Application of Alloy 48 round bars:Used for glass-to-metal seals in radio valves and incandescent electric light bulbs and for industrial thermostats that operate at temperatures up to 840°F (450°C).
Types of Alloy 52 bars we stock:
Application of Alloy 52 round bars:Mercury-wetted reed switches, metal seals for electronic tubes, automotive and industrial lamps, specialty hermetic devices.
monel alloy 500 round bars are age hardenable versions of alloy 400 for increased strength and hardness. Monel alloy 500 has excellent corrosion resistance. It uses the addition of aluminum and titanium as hardening agents. It can be heat treated to 140, 000 190, 000 tensile strength. It is hardenable by cold working and age hardening. Monel alloy 500 is a precipitation-hardenable nickel-copper alloy that combines the excellent corrosion resistance characteristic of monel 400 with the added advantage of greater strength and hardness. These amplified properties, strength and hardness are obtained by adding aluminum and titanium to the nickel-copper base and by a thermal processing used to effect precipitation, typically called age hardening or aging. When in the age-hardened condition, monel alloy 500 has a greater tendency toward stress-corrosion cracking in some environments than monel 400. Monel alloy 500 has approximately three times the yield strength and double the tensile strength when compared with alloy 400. Plus, it can be further strengthened by cold working prior to precipitation hardening. The strength of this nickel steel alloy is maintained to 1200o f but stays ductile and tough down to temperatures of 400o f. Its melting range is 2400-2460o f.
Inconel 625 is a nickel-based alloy used both for its high strength and outstanding aqueous corrosion resistance. The strength of alloy 625 is primarily a solid solution effect from molybdenum and columbium. Alloy 625 has excellent weld ability and is frequently used to weld AL-6XN alloy. Matching filler metals are also used to combine dissimilar metals. Alloy 625 has a face-centered cubic structure. After long exposures at a temperature of approximately 650°C (1200°F) the alloy precipitates some isolated carbides and a metastable tetragonal phase which later changes to a stable orthorhombic phase Ni3 (Nb, Ti). The mechanical properties are enhanced by the molybdenum and niobium content through solid-solution hardening of the nickel-chromium matrix. There is, however, a loss in ductility. Inconel 625 Bars are used in industries which require super alloys that don’t oxidize or corrode and maintain their integrity across a full range of extreme temperatures. Nickel base, reinforced with a columbium-tantalum alloy, molybdenum, niobium and chromium. Inconel 625’s combination of refractory metals and alloys exhibit uniform performance at temperatures ranging from cryogenic to over 1000 degrees Celsius/2000 degrees Fahrenheit. Performance characteristics include scaling and oxidation resistance, stabilization during welding, resistance to chloride stress and corrosion cracking and outstanding fatigue strength. Inconel 625 Bars are non-magnetic. This makes Inconel 625 a prime of the aerospace, hardware manufacturing, marine engineering, chemical processing and power generation industries. Inconel 625 (UNS N06625) corrosion resistance includes harsh and hostile environments such as salt water, fresh water, neutral salts, air and alkali.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union, ,
Packaging Details : AS PER YOUR TERMS.
Delivery Time : READY STOCK
Nickel 718 is an age hardenable alloy, which offers a combination of high strength up to 1300° F, corrosion resistance and good weld ability. It can achieve approximately 200, 000 psi tensile strength. This grade is hardenable by cold working and age hardening. It has high strength and corrosion resistant properties needed in the aggressive environments encountered in oil & natural gas production. This grade is hardenable by cold working and age hardening. Every type of metal that is used in industry has its own properties and is treated in varying ways to provide the appropriate amount of resilience needed for the processes in which it will be used. One of the types of metals often used in industry is the Inconel Alloy 718 Bar. This type of metal is a high-strength nickel alloy that can be specially ordered to stand up to extremely high temperatures, up to 1300 degrees Fahrenheit, while maintaining its ductility. Inconel Alloy 718 Bars is suitable for welding and other processes that require formability. Alloy 718 Nickel bar is a precipitation-hardening nickel-chromium alloy containing significant amounts of iron, columbium and molybdenum, along with lesser amounts of aluminum and titanium. Inconel Alloy 718 Bars maintain high strength and good ductility up to 1300°F (704°C). The Nickel Bar Alloy has relatively good weld ability, formability and excellent cryogenic properties compared to other precipitation hardening nickel alloys. The sluggish precipitation hardening response of this alloy allows it to be readily welded without hardening or cracking.
Monel Alloy K500 round bars UNS S05500 WR. NO 2.4375 contain Titanium 0.35-0.85%, Manganese 1.5% max, Nickel 63.0-70.0%, Silicon 0.50% max, Carbon 0.25% max, Aluminium 2.30-3.15% which is commonly used in various daily applications such as Sour-gas service applications, Oil and gas production safety lifts and valves, Oil-well tools and instruments like drill collars, Oil well industry, Doctor blades and scrapers, Chains, cables, springs, valve trim, fasteners for marine service, Pump shafts and impellers in marine service. Monel Alloy K500 in the annealed condition can be strengthened further by relatively low temperature heat treatment. Monel Alloy K500 bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Monel Alloy K500 round bars along in types of Monel Alloy K500 bright round bars, Monel Alloy K500 hexagonal bars, Monel Alloy K500 square bars, Monel Alloy K500 hex bars, Monel Alloy K500 flat bars, Monel Alloy K500 threaded bars and Monel Alloy K500 forged bars. All the Monel Alloy K500 bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 6001-208 we export Monel Alloy K500 rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.
Types of Monel Alloy K500 bars we stock:
Application of Monel Alloy K500 round bars:Sour-gas service applications, Oil and gas production safety lifts and valves, Oil-well tools and instruments like drill collars, Oil well industry, Doctor blades and scrapers, Chains, cables, springs, valve trim, fasteners for marine service, Pump shafts and impellers in marine service.
Inconel Alloy 738/738LC round bars contain Chromium 15.70-16.30% Manganese 0.20% max, Silicon 0.30% max, Carbon 0.15-0.20%, Aluminium and titanium 6.50-7.20% which is commonly used in various daily applications such as Aerospace components, landing gear, nuclear reactor components, petrochemical industry, injection moulding equipment etc. Alloy 738/738LC in the annealed condition can be strengthened further by relatively low temperature heat treatment. Inconel Alloy 738/738LC bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Inconel Alloy 738/738LC round bars along in types of Inconel Alloy 738/738LC bright round bars, Inconel Alloy 738/738LC hexagonal bars, Inconel Alloy 738/738LC square bars, Inconel Alloy 738/738LC hex bars, Inconel Alloy 738/738LC flat bars, Inconel Alloy 738/738LC threaded bars and Inconel Alloy 738/738LC forged bars. All the Inconel Alloy 738/738LC bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-2008 we export Inconel Alloy 738/738LC rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.
Types of Inconel Alloy 738/738LC bars we stock:
Application of Inconel Alloy 738/738LC round bars:Aerospace components, landing gear, nuclear reactor components, petrochemical industry, injection moulding equipment etc.
At Harsh Steel Nickel Alloy X-750/UNS N07752 is available in Inconel X-750 wire, Inconel X-750 Round bar, Inconel X-750 Forged bar, Inconel X-750 hex bar, Inconel X-750 Flat bar, Inconel X-750 Circles, Inconel X-750 Ring, Inconel X-750 Tube, Inconel X-750 seamless Pipe, Inconel X-750 Welded / ERW Pipe, Inconel X-750 Sheet, Inconel X-750 Plate, Inconel X-750 Coil, Inconel X-750 Flanges, Inconel X-750 fasteners, Inconel X-750 Socket weld Fittings, Inconel X-750 ferrule fittings, Inconel X-750 Buttweld fittings Like cap, elbow, tee, Reducer.
Inconel X-750 is a nickel-chromium alloy which has been made precipitation-hardenable by the increments of aluminum and titanium. Inconel X-750 has great resistance to erosion and oxidation along high tensile and creep break properties at temperature up to 1300ºf (700ºc). Because of X-750's great unwinding safety it is helpful for applications as high-temperature springs and fasteners, X-750 is likewise utilized as a part of gas turbines, rocket engines, atomic reactors, weight vessels, tooling and airplane structure.
Sheet, Strip and Plate are available with the following heat treatments
Stock Availability Of Contact Sales
| Alloy Name | Trade Name | UNS No. | American Specs | German Specs |
| Alloy X750 | Inconel X750 | UNS N07750 UNS N07752 |
AMS 5542 Sheet, Strip and Plate AMS 5582 Seamless Tube AMS 5583 Seamless Tube AMS 5747 Bar and Forgings AMS 5779 Welding Electrodes AMS 5598 Sheet, Strip and Plate AMS 5667 Bar and Forgings AMS 5668 Bar and Forgings AMS 5669 Bar AMS 5670 Bar and Forgings AMS 5671 Bar and Forgings AMS 5698 Wire AMS 5699 Wire |
Werkstoff 2.4669 |
Technical Data Sheet
| Chemical Composition Limits | ||||||||||||
| Weight% | Ni +(Co) | Cr | Fe | Ti | Al | Nb + (Ta) | Mn | Si | S | Cu | C | Co |
| Nickel Alloy X-750 UNS N07750 |
55.0-59.0 | 19.0 -22.5 | 7.0-9.5 | 2.75-4.0 | 1.0-1.7 | 0.35 max | 0.03 max | 0.35 max | 0.20 max | 0.015 max | 0.010 max | Rem |
| UNS N07752 is available in billets for forging. UNS N0772 has limits of 0.05% on both Carbon and Cobalt | ||||||||||||
Typical Mechanical Properties
| Material | Size | Ultimate Tensile Strength ksi | Yield Strength (0.2% Offset) Ksi | Elongation in 4D(%) | % Reduction of Area |
| Inconel X-750 Bar | Under 4.0" | 165 | 105 | 20 | 25 |
| Inconel X-750 Bar | 4.0 " and over | 160 | 100 | 15 | 17 |
| Properties as described in AMS 5667 which requires that material following 1625°F/24 hrs, AC-Equalising + precipitation treatment have the following minimum room temperature properties. Hardness will lie in the range of 302-363 BHN | |||||
Specifications 01
| Material | Size | Tensile Strength ksi | Yield Strength (0.2% Offset) Ksi | Elongation in 2"(%) | % Hardness Rc |
| Inconel X-750 Sheet Annealed Condition |
0.010 to 0.024", incl | 140 max | - | 30 min | - |
| Inconel X-750 Sheet Annealed Condition |
over 0.024 - 0.125" incl | 130 max | 60 max | 40 min | - |
| Inconel X-750 Sheet Annealed Condition |
over 0.125 - 0.250 incl | 130 max | 65 max | 40 min | - |
| Inconel X-750 Sheet After Precipitation Treating (1300°F/20hr, A.C) |
0.010 to 0.025 incl | 165 min | 105 min | 20 min | 32 min |
| Inconel X-750 Plate After Precipitation Treating (1300°F/20hr, A.C) |
0.187 to 4.000, excl | 155 min | 100 min | 20 min | 30 min |
Specifications 02
| Material | Size | Tensile Strength ksi | Yield Strength (0.2% Offset) Ksi | Elongation in 2"(%) | % Hardness Rc |
| Alloy X-750 N07752 Type 1 |
160-185 | 100-130 | 20 | 20 | 27-40 HRC |
| Alloy X-750 Heat Treatment - Solution Treat 1.2 hrs @ 1975°F and Air Cool Precipitation Heat Treat 20 hrs @ 1320°F and Air Cool |
|||||
Waspaloy is available in Waspaloy wire, Waspaloy Round bar, Waspaloy Forged bar, Waspaloy hex bar, Waspaloy Flat bar, Waspaloy Circles, Waspaloy Ring, Waspaloy Tube, Waspaloy seamless Pipe, Waspaloy Welded / ERW Pipe, Waspaloy Sheet, Waspaloy Plate, Waspaloy Coil, Waspaloy Flanges, Waspaloy fasteners, Waspaloy Socket weld Fittings, Waspaloy ferrule fittings, Waspaloy Buttweld fittings Like cap, elbow, tee, Reducer
WASPALOY is a nickel based age hardenable alloy that possesses high temperature strength while still having a good corrosion resistance, especially to oxidation. WASPALOY can be used at temperatures up to 650°C (1200°F) which is critical rotating applications. WASPALOY is used in gas turbine engine components, missile systems, shafts, spacers, seals, rings, casings, fasteners and many other uses in engine hardware, airframe assemblies.
Properties as per AMS 5544. Heat Treatment is as follows:Annealing 1975°F / 30 mins and Air CoolSolution Heat Treatment 1825°F / 2hrs and Air CoolStabilization Heat Treatment 1550°F /4hrs and Air CoolPrecipitation Heat Treatment 1400°F / 16 hrs and Air Cool
Waspaloy Bar Properties
Specifications
Specifications
| Alloy Name | Trade Name | UNS No. | American Specs | German Specs |
| Waspaloy | Waspaloy | UNS N07001 | AMS 5544 Sheet, Strip and Plate AMS 5586 Welded Tube AMS 5828 Welding Wire AMS 5704 Bar and Forgings AMS 5706 Bar and Forgings AMS 5707 Bar and Forgings AMS 5708 Bar and Forgings AMS 5709 Bar and Forgings |
Werkstoff 2.4654 |
Technical Data Sheet
| Chemical Composition Limits | ||||||||||||||||
| Weight % | Cr | B | Zr | Al | Ti | Mo | Co | Cu | Fe | S | Si | Mn | C | P | Ni | |
| Waspaloy | 18-21 | 0.003-00.1 | 0.02-0.12 | 1.2-1.6 | 2.75-3.25 | 3.5-5.0 | 43814 | 0.50 max | 2 max | 0.030 max | 0.75 max | 1 max | 0.02-0.10 max | 0.030 max | Bal | Fe |
| Inconel 718 AMS 5662 | 0.08 | 0.35 | 0.015 | 0.015 | 0.35 | 17-21 | 50-55 | 2.8-3.30 | 4.75-5.50 | 0.05 | 0.65-1.15 | 0.20-0.80 | 1 | 0.006 | 0.3 | Rem |
Typical Mechanical Properties
| Material | Condtion | Thickness | Temp | Tensile Strength ksi | Yield Strength ksi | Elongation in 4D | Hardness HRC |
| Waspaloy Sheet | Sol Treated, Stabilization + Precipitation HT | 0-0.020" | Room | 170 | 110 | 15 | 34-44 |
| Waspaloy Sheet | Sol Treated, Stabilization + Precipitation HT | 0-0.020" | 1000°F | 145 | 100 | 13 | |
| Waspaloy Sheet | Sol Treated, Stabilization + Precipitation HT | over 0.020" | Room | 175 | 115 | 20 | 34-44 |
| Waspaloy Sheet | Sol Treated, Stabilization + Precipitation HT | over 0.020" | 1000°F | 150 | 105 | 15 |
Alloy 250 (UNS K92890 / Maraging 250) is an age-hardenable iron-nickel steel. Alloy 250 combines ultra-high strength (1800MPa), good toughness, readily machinable in pre-aged condition, excellent transverse properties and resistance to crack propagation. C250 is used for missile and ejector systems, slat tracks and drive shafts.
Specifications
Specifications
| Alloy Name | Trade Name | UNS No. | British Specs | American Specs | German Specs |
| Maraging 250 | Udimar 250 Maraging C250 Vascomax C250 |
UNS K92890 UNS K92940 |
BS S162 | AMS 6512 Bar, Tube, Forgings AMS 6520 Sheet, Strip and Plate ASTM A646 MIL-S-46850 Type 3 |
Werkstoff 1.6359 |
Technical Data Sheet
| Chemical Composition Limits | |||||||||||||
| Weight% | Ni | Co | Mn | Si | C | Al | Mo | S | P | Ti | Fe | Cr | Cu |
| C250 | 17.0 / 19.0 | 7.0 / 8.5 | 0.10 max | 0.10 max | 0.03 max | 0.05 / 0.15 | 4.6 / 5.2 | 0.010 max | 0.010 max | 0.3 / 0.5 | Bal | 0.5 | 0.5 |
Typical Mechanical Properties
| Material | Condition | Ultimate Tensile (min) | Yield Strength (Min) | Elongation in 4D % (min) | Hardness | ||
| Mpa | Ksi | Mpa | Ksi | ||||
| Alloy Maraging C250 | After Maraging heat treatment 900°F | 1758 | 255 | 1724 | 250 | 6 | ≥ 48 HRC |
Maraging 300 is an age hardenable (maraging) iron nickel stainless steel. Maraging 300 has exceptional strength, toughness and is resistant to crack propagation. Maraging 300 is used for tooling, transmission shafts, autosport components and light aircraft landing gear.
Specifications
Stock Availability Of Contact Sales
| Alloy Name | Trade Name | UNS No. | American Specs | German Specs |
| Maraging 300 | Udimar 300 Maraging C300 |
UNS K93120 UNS K93160 |
AMS 6514 Bar, Tube and Forgings AMS 6521 Sheet, Strip and Plate MIL-S-46850 TYPE 4 |
Werkstoff 1.6354 Werkstoff 1.6358 |
Technical Data Sheet
| Chemical Composition Limits | |||||||||||
| Weight% | C | Si | Mn | S | P | Co | Ni | Mo | Ti | Al | Fe |
| Maraging 300 | 0.03 max | 0.10 max | 0.10 max | 0.010 max | 0.010 max | 8.0-9.5 | 18.0-19.0 | 4.6-5.2 | 0.55-0.80 | 0.05-0.15 | Bal |
Typical Mechanical Properties
| Material | 0.2 % Yield Strength ksi | Ultimate Tensile Strength ksi | Elongation in 4D(%) | Reduction of Area % | Hardness Rc |
| Maraging 300, Solution Annealed 1500° F (816°C), 1hr, AC | 120 | 150 | 16 | 70 | 30 |
| Solution Annealed Plus Aged 900 ° F (482°C), 3 hrs AC | 280 | 290 | 8 | 40 | 52 |
Maraging 350 is a nickel maraging steel which contains Cobalt as the primary strengthening agent. Maraging 350 has excellent mechanical properties, workability and heat treatment characteristics. Maraging 350 is used for missile and rocket motor cases, landing and takeoff gear components, high performance shafting, gears and fasteners.
Specifications
Specifications
| Alloy Name | Trade Name | UNS No. | American Specs | German Specs |
| Maraging 350 | Maraging C350 Vascomax C350 |
AMS 6515 MIL-S-46850 |
Werkstoff 1.6356 |
Technical Data Sheet
| Chemical Composition Limits | ||||||||||||
| Weight% | Ni | Co | Mn | Si | C | B | P | S | Al | Mo | Ti | Zr |
| Maraging 350 | 18.5 | 12 | 0.10 max | 0.10 max | 0.03 max | 0.003 | 0.01 max | 0.01 max | 0.1 | 4.8 | 1.4 | 0.01 |
Monel Alloy 400 round bars UNS N04400 EN 2.4360 contain Copper 28-34%, Manganese 2.0% max, Nickel 63%, Silicon 0.5% which is commonly used in various daily applications such as Electronic and electrical components, Fresh water and gasoline tanks, Heat exchangers, Marine hardware and fixtures, Process piping and vessels, Propeller shafts Pumps, Pump shafts Springs. Alloy 400 in the annealed condition can be strengthened further by relatively low temperature heat treatment. Monel Alloy 400 bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Monel Alloy 400 round bars along in types of Monel Alloy 400 bright round bars, Monel Alloy 400 hexagonal bars, Monel Alloy 400 square bars, Monel Alloy 400 hex bars, Monel Alloy 400 flat bars, Monel Alloy 400 threaded bars and Monel Alloy 400 forged bars. All the Monel Alloy 400 bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-2008 we export Monel Alloy 400 rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.
Types of Monel Alloy 400 bars we stock:
Application of Monel Alloy 400 round bars:Electronic and electrical components, Fresh water and gasoline tanks, Heat exchangers, Marine hardware and fixtures, Process piping and vessels, Propeller shafts Pumps, Pump shafts Springs.
Cupro Nickel 90-10 round bars UNS C70600 Wr No. 2.0872 contain Manganese 0.7% max, Nickel 10%, Iron 1.5% which is commonly used in various daily applications such as marine hardware, piping systems and sometimes for the propellers, crankshafts and hulls of premium tugboats, fishing boats and other working boats. Cupro Nickel 90-10 in the annealed condition can be strengthened further by relatively low temperature heat treatment. Cupro Nickel 90-10 bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Cupro Nickel 90-10 round bars along in types of Cupro Nickel 90-10 bright round bars, Cupro Nickel 90-10 hexagonal bars, Cupro Nickel 90-10 square bars, Cupro Nickel 90-10 hex bars, Cupro Nickel 90-10 flat bars, Cupro Nickel 90-10 threaded bars and Cupro Nickel 90-10 forged bars. All the Cupro Nickel 90-10 bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-2008 we export Cupro Nickel 90-10 rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.
Types of Cupro Nickel 90-10 bars we stock:
Application of Cupro Nickel 90-10 round bars:Marine hardware, piping systems and sometimes for the propellers, crankshafts and hulls of premium tugboats, fishing boats and other working boats
Titanium Grade 2 is available in Bar, Billet, Extrusion, Plate, Sheet, Strip, Wire, Pipe, Tube, Rings and Forgings.
Titanium Grades 1-4 are unalloyed and generally known as CP (Commercially Pure). The tensile and yield strength of titanium generally increases with the grade number. Titanium is 30% stronger than Steel but nearly 50% lighter and although Aluminium is lighter, Titanium is stronger and has excellent strength retention. Due to Titanium's weight, strength and high corrosion resistance it is very popular in various manufacturing industries from aerospace, medical, shipping, military etc.
Specifications
Stock Availability Of Contact Sales
| Grade | British Specs | US Specs | ASTM Specs | German Specs | French Specs |
| Grade 2 | TA1 sheet/strip TA2 sheet/strip TA3 bar (obs) TA4 forging (obs) TA5 forging (obs) DTD 5073 IMI 125 |
AMS-T-9046B CP3 AMS 4902 MIL-T-9046J CP3 AMS 4941 AMS 4942 AMS 4951 Welding wire* |
ASTM B265 Gr2 Sheet/plate ASTM B337 Gr2 pipe (withdrawn) ASTM B338 Gr2 heat exchange tube* ASTM B348 Gr2 bar ASTM B367 Gr2 castings ASTM B381 Gr2 forgings ASTM F67 Gr2 Surgical Implant ASTM F467 Gr2 nuts ASTM F468 Gr2 bolts |
Werkstoff 3.7034 CP Grade 2 Werkstoff 3.7035 CP Grade 2 |
T40- CP Grade 2 T40- AIR |
Technical Data Sheet
| Chemical Composition Limits | ||||||
| Weight% | Ti | C | Fe | N | O | H |
| Titanium CP Grade 2 | bal | 0.08 | 0.3 | 0.05 | 0.02 | 0.015 |
Typical Mechanical Properties
| Material | Tensile Strength min | Yield Strength | Elongation (%) | ||
| ksi | Mpa | ksi | MPa | ||
| Titanium CP Grade 2 Annealed Sheet |
50 | 345 | 40-65 | 276-448 | 20 |
| as per MIL-T-9046B, AMS-T-9046, AMS 4902 | |||||
Titanium Grade 5 round bars UNS R56400 WR NO 3.7165 contain Aluminium 5.5-6.75 % max, Iron 0.40% max which is commonly used in various daily applications such as Aerospace, Surgical Implants, Jewellery, Chemical, Springs, Bolts. Titanium Gr 5 in the annealed condition can be strengthened further by relatively low temperature heat treatment. Titanium Grade 5 bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Titanium Grade 5 round bars along in types of Titanium Grade 5 bright round bars, Titanium Grade 5 hexagonal bars, Titanium Grade 5 square bars, Titanium Grade 5 hex bars, Titanium Grade 5 flat bars, Titanium Grade 5 threaded bars and Titanium Grade 5 forged bars. All the Titanium Grade 5 bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-2008 we export Titanium Grade 5 rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.
Types of Titanium Grade 5 bars we stock:
Application of Titanium Grade 5 round bars:Aerospace, Surgical Implants, Jewellery, Chemical, springs, bolts.
Mumetal is available in Mumetal wire, Mumetal Round bar, Mumetal Forged bar, Mumetal hex bar, Mumetal Flat bar, Mumetal Circles, Mumetal Ring, Mumetal Tube, Mumetal seamless Pipe, Mumetal Welded / ERW Pipe, Mumetal Sheet, Mumetal Plate, Mumetal Coil, Mumetal Flanges, Mumetal fasteners, Mumetal Socket weld Fittings, Mumetal ferrule fittings, Mumetal Buttweld fittings Like cap, elbow, tee, Reducer.
Mumetal is 80% nickel with additions of iron and molybdenum as main elements in turn this alloy offers an extremely high initial permeability. It is only moderately resistant to moisture and atmospheric corrosion, it used mainly in in transformer cores but is well known for its magnetic properties which are used for shielding electrical components from magnetic fields. "HYMU 80" has a minimum DC permeability of 80, 000 at a flux density of 40 gauss when heat treated by the recommended procedure and test in accordance with ASTM 596
Physical Properties (Annealed Condition)
Specifications
Hiperco 50 round bars contains 49% cobalt and 2% vanadium which is commonly used for magnetic cores in electrical equipment. In strip form used for aircraft generators and motors. Electromagnets for medical (radiology) applications. Motor laminations, transducers, poles and cores. Hiperco 50 bars are available in ASTM A-801 and AMS A-47182 specifications. We Export and Stock Hiperco 50 round bars along in types of Hiperco 50 bright round bars, Hiperco 50 hexagonal bars, Hiperco 50 square bars Hiperco 50 hex bars, Hiperco 50 flat bars, Hiperco 50 threaded bars and Hiperco 50 forged bars. All the Hiperco 50 bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-2008 we export Hiperco 50 rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.
Types of Hiperco 50 bars we stock:
Application of Hiperco 50 round bars:Used for magnetic cores in electrical equipment. In strip form used for aircraft generators and motors. Electromagnets for medical (radiology) applications. Motor laminations, transducers, poles and cores.
At Harsh Steel Nickel 263 is available in Nimonic 263 wire, Nimonic 263 Round bar, Nimonic 263 Forged bar, Nimonic 263 hex bar, Nimonic 263 Flat bar, Nimonic 263 Circles, Nimonic 263 Ring, Nimonic 263 Tube, Nimonic 263 seamless Pipe, Nimonic 263 Welded / ERW Pipe, Nimonic 263 Sheet, Nimonic 263 Plate, Nimonic 263 Coil, Nimonic 263 Flanges, Nimonic 263 fasteners, Nimonic 263 Socket weld Fittings, Nimonic 263 ferrule fittings, Nimonic 263 Buttweld fittings Like cap, elbow, tee, Reducer.
Nimonic alloy 263 is an age-hardenable nickel-cobalt-chrome-molybdenum alloy which was designed to have excellent fabrication characteristics in the annealed condition but also very good aged strength properties. Alloy 263 is easier to form or weld than other materials such as Waspaloy or Rene 41 and exhibits excellent intermediate temperature ductility. Alloy 263 is supplied in the annealed condition and its excellent ductility in this condition makes it suitable for cold forming as well as hot working. Alloy 263 can be welded using matching composition filler wire in both TIG and MIG forms. The recommended heat treatments for Nimonic 263 are as follows:
Specifications
Stock Availability Of Contact Sales
| Alloy Name | Trade Name | UNS No. | British Specs | American Specs | German Specs | French Specs |
| Nickel Alloy 263 | Nimonic 263 Haynes 263 |
UNS N07263 | BS HR10 BS HR206 BS HR404 |
AMS 5872 Sheet Strip and Plate AMS 5886 Bar and Forgings |
Werkstoff 2.4650 | AFNOR NC 20TA |
Technical Data Sheet
| Chemical Composition Limits | |||||||||
| Weight% | Ni | Cr | Mn | Si | C | Al | Ag | B | Fe |
| 263 | Bal | 19-21 | 0.60 max | 0.40 max | 0.04-0.08 | 0.60 max | 0.0005 max | 0.005 max | 0.07 max |
| Weight% | Cu | Mo | Co | Ti | Al+Ti | Pb | Bi | S | - |
| 263 | 0.20 max | 5.6-6.1 | 19-21 | 1.90-2.40 | 2.40-2.8 | 0.0020 max | 0.0001 max | 0.007 max | - |
Extruded Bar Typical Mechanical Properties
| Material | Temp °C | Yield Strength 0.2% (Mpa) | Tensile Strength (Mpa) | Elongation % | Hardness HB |
| Nimonic 263 Bar Solution Treated (AMS 5886/ BS HR10) |
RT | - | - | - | 248 max |
| Nimonic 263 Bar Heat Treated (AMS 5886 / BS HR10) |
RT | 585 (typical) | 1004 (typical) | 45 | - |
| Nimonic 263 Bar Heat Treated (AMS 5886/ BS HR10) |
780 | 403 (min) | 541 (min) | 12 | - |
Cold-rolled Sheet Typical Mechanical Properties
| Material | Temp °C | Yield Strength (Mpa) | Tensile Strength (Mpa) | Elongation % |
Hardness HRC |
| Nimonic 263 Sheet Solution Treated (AMS 5872 / BS HR206) |
RT | - | - | - | 22.5 max |
| Nimonic 263 Sheet Heat Treated (AMS 5872 / BS HR206 |
RT | 580 (typical) | 973 (typical) | -39 | |
| Nimonic 263 Sheet Heat Treated (AMS 5872 / BS HR206 |
780 | 403 (min) | 541 (min) | 9 | - |
Cupro Nickel 70-30 round bars UNS C71500 Wr No. 2.0872 contain Manganese 1.0% max, Nickel 30%, Iron 0.7% which is commonly used in various daily applications such as Desalination units, Hydraulic lines, Fish cages for aquaculture, Heat exchangers and condensers, Sea water pipework, Offshore fire water systems, Tubes for power plants and ships, Pumps, valves, sheathing and fittings for ship hulls. Cupro Nickel 70-30 in the annealed condition can be strengthened further by relatively low temperature heat treatment. Cupro Nickel 70-30 bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Cupro Nickel 70-30 round bars along in types of Cupro Nickel 70-30 bright round bars, Cupro Nickel 70-30 hexagonal bars, Cupro Nickel 70-30 square bars, Cupro Nickel 70-30 hex bars, Cupro Nickel 70-30 flat bars, Cupro Nickel 70-30 threaded bars and Cupro Nickel 70-30 forged bars. All the Cupro Nickel 70-30 bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-2008 we export Cupro Nickel 70-30 rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.
Cupro Nickel 70-30 round bars:
Application of Cupro Nickel 70-30 round bars:Desalination units, Hydraulic lines, Fish cages for aquaculture, Heat exchangers and condensers, Sea water pipework, Offshore fire water systems, Tubes for power plants and ships, Pumps, valves, sheathing and fittings for ship hulls.
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : sea worthy
Delivery Time : 60 days
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : sea worthy
Delivery Time : 60 days
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : sea worthy
Delivery Time : 60 days
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : sea worthy
Delivery Time : 60 days
Mr. Dinesh Chandan (Harsh Steel)
Siddhivinayak Co Op Hsg Soc(Durgadas Building), Shop No 3, Ground floor, Ardeshir Dadi cross Lane, Near CP Tank, Bhuleshwar, Mumbai, Maharashtra - 400004
https://www.nickelalloys.in
Share us via
View Contact Number 
