Laboratory reagent grade. Minimum purity 97.5% White powder odorless.Eases deposit of lead sulphate during discharge of negative plate on its surface to enable reconversion into active lead on charge cycle.

Manufactured by Ranbaxy fine chemicals Ltd. (Taken over by Avantor). Laboratory reagent grade. Minimum purity 97.5% White powder odorless.Features : Eases deposit of lead sulphate during discharge of negative plate on its surface to enable reconversion into active lead on charge cycle.

Size available 121mm X 1.3 mm X 290mm.128mm X 1.3 mm X 290mmThickness measured at 20 KPA.Features : Prevents shedding of active material of positive plates.Act as an acid bank.

Kanecaron Brand Modacrylic Fiber Mfg by Kaneka Corpn Japan.

Type KCE 3.3 Dtex Available in 3mm and 5mm size or as per customers size requirement.

Features :

• Very good acid resistance.
• Excellent dispersion both for dry as well as wet mixing.
• Very good adhesion to paste because of kidney type cross section.

Manufactured by Harsha Industries Corpn.

Size available 5mm, 6mm, 6.2mm, 7.3mm, 8mm, capsule type.

Features : -

• Manufactured using virgin plastic.
• Good acid resistance for long life.
• Unbreakable.

Size available 121mm X 1.3 mm X 290mm.128mm X 1.3 mm X 290mmThickness measured at 20 KPA.
Features :

• Prevents shedding of active material of positive plates.
• Act as an acid bank.

Available in Diameter of 4mm, 5mm, 6mm, 6.2mm, 7.3mm, 8mm, 8.4mm & 10mm. FolloAvailable in Diameter of 4mm, 5mm, 6mm, 6.2mm, 7.3mm, 8mm, 8.4mm & 10mm. Following are some of the specialized features of our woven pluritubular gauntlets using super high tenacity polyester high torsion continuous filament yarns with protective resin coating.

Features :-

• Excellent burst resistance.
• Very low electrical resistance.
• Good acid resistance.
• No leaching of chemical impurities in electrolyte.
• Excellent backup.

wing are some of the specialized features of our woven pluritubular gauntlets using super high tenacity polyester high torsion continuous filament yarns with protective resin coating.

Laboratory reagent grade. Minimum purity 97.5% White powder odorless.Eases deposit of lead sulphate during discharge of negative plate on its surface to enable reconversion into active lead on charge cycle.

Manufactured by Ranbaxy fine chemicals Ltd. (Taken over by Avantor). Laboratory reagent grade. Minimum purity 97.5% White powder odorless.Features : Eases deposit of lead sulphate during discharge of negative plate on its surface to enable reconversion into active lead on charge cycle.

Size available 121mm X 1.3 mm X 290mm.128mm X 1.3 mm X 290mmThickness measured at 20 KPA.Features : Prevents shedding of active material of positive plates.Act as an acid bank.

Kanecaron Brand Modacrylic Fiber Mfg by Kaneka Corpn Japan.

Type KCE 3.3 Dtex Available in 3mm and 5mm size or as per customers size requirement.

Features :

• Very good acid resistance.
• Excellent dispersion both for dry as well as wet mixing.
• Very good adhesion to paste because of kidney type cross section.

Manufactured by Harsha Industries Corpn.

Size available 5mm, 6mm, 6.2mm, 7.3mm, 8mm, capsule type.

Features : -

• Manufactured using virgin plastic.
• Good acid resistance for long life.
• Unbreakable.

Size available 121mm X 1.3 mm X 290mm.128mm X 1.3 mm X 290mmThickness measured at 20 KPA.
Features :

• Prevents shedding of active material of positive plates.
• Act as an acid bank.

Available in Diameter of 4mm, 5mm, 6mm, 6.2mm, 7.3mm, 8mm, 8.4mm & 10mm. FolloAvailable in Diameter of 4mm, 5mm, 6mm, 6.2mm, 7.3mm, 8mm, 8.4mm & 10mm. Following are some of the specialized features of our woven pluritubular gauntlets using super high tenacity polyester high torsion continuous filament yarns with protective resin coating.

Features :-

• Excellent burst resistance.
• Very low electrical resistance.
• Good acid resistance.
• No leaching of chemical impurities in electrolyte.
• Excellent backup.

wing are some of the specialized features of our woven pluritubular gauntlets using super high tenacity polyester high torsion continuous filament yarns with protective resin coating.