Harrysons Engineering

Sama, Vadodara, Gujarat

Metal Protective Compound (KMP 302) is a protective compound, which has a Ceramic and Fiber-Glass Base. Metal Protective Compound is a Solvent-Free, 100% solids, high build, slightly flexible epoxy coating and has excellent chemical and abrasion resistance. This Metal Protective Compound is designed with some internal flex, which reduces brittleness and improves impact resistance. The Metal Protective Compound is resistant to sewer gasses, sulfur based chemicals, dilute acids and most caustics. Metal Protective Compound is suitable for full time immersion, formulated with a high performance cycloaliphatic curing system. Metal Protective Compound also add body to the coating resulting in a two to three coat, no sag, high build glaze finish. Metal Protective Compound protects the iron and steel from rusting and stops further corrosion, scale forming and wearing away of the metal surfaces mainly due to humidity, salinity, acid in rains, and more importantly corrosive mud.

Kenteck Wood Patch rebuilds or improvement over Wood Putty. Anyone looking to repair dents, gouges, chips or broken corners, Wood Patch is the remedy. Wood Patch works on wood projects that have dents, nail holes, broken and chipped corners, or covering screw heads. The Wood Patch fills holes, gouges, and scratches. Wood Patch also replaces rotten and worn wood. The Wood Patch is ideal for reshaping wood carvings and wood parts such as handles and knobs. The Wood Patch works as an adhesive in making general wood-to-wood and wood-to-metal bonding

Metal Protective Compound (Kenteck Ultimate Compound 304) is a two-component repair fast curing and rebuilding material. Metal Protective Compound is chemically resistant to most of organic and non organic chemicals, mild acids, alkalis, solvents, salts, and hydrocarbons. This Metal Protective Compound is an emergency repair product that makes fast, permanent repairs and provides the ability to respond to emergency situations quickly and positively, thereby minimizing damage to equipment and possibly saving money in clean up costs & damage to the environment.

General Purpose Kenteck Cold Weld Bonding Compound is a two-component repair and rebuilding material. General Purpose Kenteck Cold Weld Bonding Compound can be used for sealing of blow holes & cracks in the mild steel, graded cast iron, iron and stainless steel as well as some of the exotic alloy steel. The cured repaired portion becomes an integral part of main body.
General Purpose Kenteck Cold Weld Bonding Compound is chemically resistant to most of organic and non organic chemicals, mild acids, alkalis, solvents, salts, and hydrocarbons. General Purpose Kenteck Cold Weld Bonding Compound can be used at temperature up to 70ºC to 80ºC. General Purpose Kenteck Cold Weld Bonding Compound has successfully proved its quality for its high bonding strength. General Purpose Kenteck Cold Weld Bonding Compound has been used in high temperature steam lines as well.

Kenteck Sealant Compound is designed as a crack or seam sealer/filler for pipes and marine applications. This flexible Kenteck Sealant Compound also makes an excellent waterproof, permanent bedding compound and repairs dents, gouges, chips or broken corners. Kenteck Sealant Compound works on any surface like any metal, wood, concrete, specifically on cast iron, etc. The unique viscosity of Kenteck Sealant Compound is ideal for dents and gouge filling - thick to the point of barely brushable, yet just thick enough to use with a putty knife - so you can work it into broken corners and chips easily and it will not flow or sag away.

Kenteck Cold Weld Superbond 301 is a fast bonding Compound that seals leaks and repairs Gouges in steel, Aluminum, wood, fiberglass, concrete and ceramics in Just 3 minutes. Kenteck Cold Weld Superbond 301 is an emergency repair product that makes fast and permanent repairs as well as provides the ability to respond to emergency situations quickly and positive. Kenteck Cold Weld Superbond 301 minimizes damage to equipment and possibly saves money in clean up costs and harm to the environment.

Kenteck Coldweld Superbond 301 is a fast bonding Compound that seals leaks & repairs gouges in steel, aluminum, wood, fiberglass, concrete and ceramics in just 3 minutes. Kenteck Coldweld Superbond is an emergency repair product that makes fast, permanent repairs and provides the ability to respond to emergency situations quickly. The Kenteck Coldweld Superbond minimizes damage to equipment and possibly saves money in clean up costs and damage to the environment.

Kenteck Metal Protector (KMP 302) is a protective compound, which has a Ceramic and Fiber-Glass Base. Kenteck Metal Protector (KMP 302) is a Solvent-Free, 100% solids, high build and slightly flexible epoxy coating that has excellent chemical and abrasion resistance. This epoxy is designed with some internal flex, which reduces brittleness and improves impact resistance. Kenteck Metal Protector (KMP 302) is resistant to sewer gasses, sulfur based chemicals, dilute acids and most caustics. Suitable for full time immersion, formulated with a high performance cycloaliphatic curing system. Kenteck Metal Protector (KMP 302) also add body to the coating resulting in a two to three coat, no sag, high build glaze finish. KMP-302 protects the iron and steel from rusting and stops further corrosion, scale forming and wearing away of the metal surfaces mainly due to humidity, salinity, acid in rains and more importantly corrosive mud.

Metal Lining is an epoxy with ceramic and fiber glass base coat, which has been specially designed for coating inside the pipe where maximum abrasiveness takes place. Metal Lining, offered by us, can withstand any chemicals and acids to any extend. The Metal Lining is corrosion & abrasion resistant, and has a very high bonding strength and grips to any identify steel.

Kenteck Concrete Patch Bonder (KCPB 310) is a low viscosity, 100% solids and solvent-free two component amine cured epoxy. It is designed as a resin for floors repairs toppings and other flooring systems. Kenteck Concrete Patch Bonder (KCPB 310) are a broad line of floor preparation products, including high performance epoxy patching compounds and chemical resistant coatings and anti-skid epoxies to protect plant floors, walkway. Kenteck Concrete Patch Bonder (KCPB 310) can be used as a primer under epoxy grouts, mortars, toppings, high performance coatings and lining systems. Kenteck Concrete Patch Bonder (KCPB 310) has been formulated to provide deep penetration into the concrete surface without the use of any solvent, therefore, eliminating any objectionable solvent odor, particularly inside buildings. Kenteck Concrete Patch Bonder (KCPB 310) offers protection from harsh chemicals, solvents, alkalis and acids and also makes an excellent clear floor finish. One or two coats provide a tough, hard, durable film, which provides good protection.

When it comes to Concrete Patch Binder, then we are the one stop destination in the market. We are engaged in making available premium Concrete Patch Binder that is in conformity with the set industrial standards. The offered Concrete Patch Binder is in huge demand owing to its excellent quality.

Kenteck Ultimate Compound (KUC 304) is a two-component repair fast curing and rebuilding material. Kenteck Ultimate Compound (KUC 304) is chemically resistant to most of organic and non-organic chemicals, mild acids, alkalis, solvents, salts, and hydrocarbons. It is an emergency repair product that makes fast and permanent repairs as well as provides the ability to respond to emergency situations more quickly and positively, by minimizing damage to equipment and possibly saving money in clean up costs and harm to the environment.

Crack Sealant contains high density fillers that enter and block crack and void spaces. Crack Sealant’s unique viscosity is ideal for crack filling, so you can work it into cracks easily. We are engaged in making available premium Crack Sealant at very reasonable prices for our esteemed clients.

Kenteck Cold Weld Compound (General Purpose) is a two-component repair and rebuilding material. Kenteck Cold Weld Compound (General Purpose) can be used for sealing of blow holes and cracks in the mild steel, graded cast iron, iron and stainless steel as well as some of the exotic alloy steel. The cured repaired portion becomes an integral part of main body. Kenteck Cold Weld Compound (General Purpose) is chemically resistant to most of organic and non organic chemicals, mild acids, alkalis, solvents, salts, and hydrocarbons. Kenteck Cold Weld Compound (General Purpose) can be used at temperature up to 70ºC to 80ºC. Cold Weld has successfully proved its quality for its high bonding strength. Kenteck Cold Weld Compound (General Purpose) has been used in high temperature steam lines as well.

Kenteck Wood Patch rebuilds and improves Wood Putty. For anyone who is looking to repair dents, gouges, chips or broken corners, Kenteck Wood Patch is the perfect remedy. Kenteck Wood Patch works on wood projects that have dents, nail holes, broken and chipped corners. Kenteck Wood Patch fills holes, gouges, and scratches as well as covers screw heads. Kenteck Wood Patch also replaces rotten and worn wood. Kenteck Wood Patch is ideal for reshaping woodcarvings and wood parts such as handles and knobs. Further, it works as an adhesive in making general wood-to-wood and wood-to-metal bonding.

Kenteck Fusion Bond (KFB 305) is designed as a crack or seam sealer/filler for pipes and marine applications. Kenteck Fusion Bond (KFB 305) is a fast bonding compound in semi liquid form that seal’s leaks and repairs gouges in steel, aluminum, wood, fiberglass, concrete and ceramics in just 10 to 15 minutes. The Grey epoxy contains high-density fillers that enter and block crack and void spaces. The unique viscosity of Kenteck Fusion Bond (KFB 305) is ideal for crack filling - thick to the point of barely brushable, yet just thick enough to use with a putty knife - so you can work it into cracks easily and it will not flow or sag away.

Kenteck Metal Corrocoat 307 is the two-component system, designed to cross link at room temperature. The base component of the Kenteck Metal Corrocoat 307 is an epoxy. Kenteck Metal Corrocoat 307 also gives excellent gloss and color retentions properties. Kenteck Metal Corrocoat 307  is a multi use product, instantly ready for use, specially formulated for easy application on metal, concrete (wet and dry), steel and wood surfaces.

Kenteck Floor Coating is a low viscosity, 100% solids and solvent-free two component amine cured epoxy. The Floor Coating is designed as a resin for floors, decorative toppings and other flooring systems. Floor Coating is a broad line of floor preparation products, including high performance epoxy patching compounds and chemical resistant coatings and anti-skid epoxies to protect plant floors, walkway. This Floor Coating has been formulated to provide deep penetration into the concrete surface without the use of any solvent. Floor Coating offers protection from harsh chemicals, solvents, alkalis & acids, and also makes an excellent clear floor finish. One or two coats provide a tough, hard, durable film, which provides good protection.