Our Products
With screen-printed scale ad double hooks. Plastic/ metal body Gms ad Newton scale s combined. Capacity 100gm 250gm, 500gm 1000gm and 1newton, 2.5newton, 5 Newton and 10newton
Cast Metal with metal valves. Complete with stopcock and fitted on nicely polished wooden base Metal Plate diameter 150mm
Single pan, total Capacity 2610gm (Using attachments weights) sensitive to 0.1gm. The three beams are each provided with a sliding weight and are graduated 0-500x100g, 0-100 x 10gm and 0-10x0.1gm respectively, permitting reading upto 610gm without the use of attachment weight. Magnetic damping of the beam provides quick accurate weighing, with stainless steel pan 150mm diameter.
AccessoriesAttachment weights. Two 1 kg and one-500gm weights with stainless steel knife edge suspension for attachments to suspension pivot on the beam, to increase the capacity of the valance up to 2610gm.
Suitable for may laboratory applications, including sealing bottles, culture tubes. Sealing leaks reducing evaporation or heat losses, covering corks, making weight boats. Can be labeled using a china graph pencil.
Two pan balance for accurate and rapid weighing up to 2 kg. The balance has two beams with centre reading sliding masses. These weigh up to 0-200gm x10gm, & 0-10 gm X0.1 gm, total 210gm; Supplementary masses extend the range to 2 kg. With spring loaded zero adjuster and magnetic damping, with stainless steel pans of 150 mm diameter.
Polished deep drawn Aluminum with safety valve and control for obtaining 35, 70 or 105Kn /m2. Working pressures reinforced heat resistance handles and heavy machined base, may heated by gas or electricity. Dimensions approximately 220x240mm, internal height X diameter.
With stone agate knife-edges, adjustable at any height with improved down ward playing pointer on wooden polished case. Capacity 250gm
This balance is a basic general purpose balance for students. The hangers have double hooks for specific gravity experiments and the pans are detachable. The whole assembly is fitted on wooden base provided with leveling screw. Provided with agate knife edges and bearings. Pan diameter 10cm Sensitivity 2mg.
Capacity 210 gm Large high resolution, backlit graphic display; ergonomic leveling system AutoCalTM; cursor keys for navigation through menu; one function per key; available with or without internal calibration; user selectable stability levels; user selectable filters; stability indicator; auto-zero tracking; RS232 bi-directional interface with selectable baud rates; weigh below capability; menu and calibration lock-out switch; factory reset option; spill gutter; removable draft shield doors.Models are CSA certified to CSA 1010-1, UL 3101-1 and IEC 1010-1. FCC approved.
Optional Accessories
Modular display upgrade kit, auxiliary display kit, remote display kit, in-use display cover kit, security device, density determination kit, calibration masses, printer, RS232 interface cable, draft shield kit (0.01g & 0.1 g )
Aspirator Bottles are made of Polypropylene and are therefore much lighter then glass. These are autoclavable, durable & dependable. The leak proof spigot screwed to the bottle body requires only a half turn to open or close. These bottles are used for storing or dispensing distilled water & other laboratory solutions. Threads should be totally disengaged be fore autoclaving Capacity 5 Liter, 10 Liter & 20 Liter
Dial 100mm diameter, dual scale, range 940-1060mbxmb figured in black, and good quality movement mounted on hard wood/ plastic frame 165mm diameter, with glass in anodized bezel. With lug for rear mounting.
Superior brass chrome plated, accurate. Capacity 1mgm. To 100gm, 1mgm to 200gm, 1 mgm to 500gm and 1mg to 1000gm
Capacity 0-250gm, 0-1000g. For trial weighting, for animal weighing for post- mortem examinations and in school science, a balance is often required which reads directly in grams and has a capacity of up to 1 kg. The double range lever balance is in effect two balances in one. The low range scale is graduated 0-250x1gm. And the high range scale 0-1000x5gm. Swinging the counter- weight to one of two positions makes the change from one range to other. The scale marked white on black is read by means of an anti parallax cursor Finished in gray with all bright parts nickel plated. Dimensions, overall 450x525mm height X width
Triangular section Aluminium alloy track, length 255cm with staggered air holes at 25mm spacing approx, supported by two light alloy casting positioned 45cm from each end of the track. Each support has an adjustable knurled screw with fiducially rivet to facilitate track setting, one revolution corresponding to a height difference of 1.25mm Lateral and horizontal adjustable are made separately at the two and one point support respectively. V- slots are incorporated for positioning the four faced scaling rule. Vertical holes accommodate a quick action shutter with an integral cable release for use in stroboscope photography. Large catapult arms with slots for elastic bands are fitted to each end of the track. A pulley fitted to one end of the track enables experiments involving acceleration under a constant force to be investigated. Identical end caps enable air to be introduced from either end of the track, bung being supplied to close the end not being used. The knurled screw, catapult arms and pulley mountings are matt black finish to aid the interpretation of stroboscope photographs. Complete with supply of elastic bands.
Accessories KitAluminium alloy vehicles have bee carefully designed to attain the optimum eight of buffer attachments. Buffer attachments are located in holes 6.5mm diameter ad clamped by screw at each Ed of the vehicle. A vertical 4mm diameter hole in the center of each vehicle enables the white plastics rod to be used to indicate the positions of vehicles on stroboscope photographs. Vertical slots in the top of the vehicles enable white cards to be positioned for photoelectric timing applications. The vehicles buffer attachment and clamping screw are finished in matt black to the interpretation stroboscopic photographs
Kit ComprisesDie cast body or high tensile strength aluminum fitted with safety valve pressurecontroller adjustable to 70 or 05kn/m2 (10 or 15 ib/in2), pressure gauge and draw-off cock. A siphon tube allows the contents to be dried after sterilization by removing steam and water, thus producing a vacuum of 380 torr on cooling. Diameter 290mm x depth 250mm. Loading 1850 W for use on 220-volt 50Hz.
Brass chrome plated velvet lined box nicely polished complete with forceps. Very accurate. Capacity 1mgm to 50gm and 1mgm to 100gm
With Aluminum flat beam, nicely lacquered graduated in to 100 division with zero at centre. Provided with best- selected agates, ground to precision accuracy. Fitted in finely polished case with two side doors and counterpoised front side doors and counterpoised front side. Sub mica wooden base. Arrestment vertical raising type.