A bracket is provided at the discharge side of the pump, At the center of the bracket a rubber ring is mounted .A pedestal is fixed to the bottom of the plate by foundation bolts, winch are grouted. The pump is lowered into the pit through a guide rail pipe.On reaching the pedestal the bracket engages into the pedestal and the rubber ring prevent leakage of water. The pump can be lifted back by pulling it out without removal of any nuts or bolts.

• Automatic GradeFully Automatic
• ApplicationIndustrial

• Motor Speed2800 rpm

Domestic pumps For de watering of basements, cable trenches and low lying areas in residential and small commercial complexes. Motor- 2800 rpm oil filled with "F" class insulation and temperature rise of "B" class, suitable for three phase and single phase power supply. The motor is jacketed & filled with the coolant. Thus the pump is suitable for working in worst of the working conditions dry running. Dual ball bearing running in oil bath. Dual mechanical seal. Extra cable can be provided with prior information.

For handling liquids containing max. solid sizes of 50 mm, 80 mm and 100 mm sphere Impeller type - vortex channel type with two vane or single vane. semi-open single vane.Dual mechanical seal with pump side seal of silicon carbide vs. silicon carbide.

• length3 mtrs.

Vertical wet pit type with Pump submerged and motor at the top coupled by extended shaft. Available in SS, Ci, Cast Steel and rubber lined constructions. Column pipe and discharge pipe are mounted on the same motor stool frame, this enables to pull out the pump for maintenance purpose without emptying the pit.

• Vertical wet pit type with Pump submerged and motor at the top coupled by extended shaft. • Available in SS, Duplex steel, CI, Cast Steel and rubber lined constructions. • Available for column length upto 3 mtrs. • Heavy duty thrust bearing is used. Permanently lubricated durable lower bush bearing can be provided in Bronze, Teflon or Rubber etc. As per application. • Additional Intermediate bush bearing is provided after every one meter column length. • Ideal for handling liquid at high temperature or which are corrosive or inflamable. • Chokeless, screen less, and glandless pump with non-clog impeller. • Vertical flange mounted motor as prime mover

A bracket is provided at the discharge side of the pump, At the center of the bracket a rubber ring is mounted .A pedestal is fixed to the bottom of the plate by foundation bolts, winch are grouted. The pump is lowered into the pit through a guide rail pipe.On reaching the pedestal the bracket engages into the pedestal and the rubber ring prevent leakage of water. The pump can be lifted back by pulling it out without removal of any nuts or bolts.

• Automatic GradeFully Automatic
• ApplicationIndustrial

• Motor Speed2800 rpm

Domestic pumps For de watering of basements, cable trenches and low lying areas in residential and small commercial complexes. Motor- 2800 rpm oil filled with "F" class insulation and temperature rise of "B" class, suitable for three phase and single phase power supply. The motor is jacketed & filled with the coolant. Thus the pump is suitable for working in worst of the working conditions dry running. Dual ball bearing running in oil bath. Dual mechanical seal. Extra cable can be provided with prior information.

For handling liquids containing max. solid sizes of 50 mm, 80 mm and 100 mm sphere Impeller type - vortex channel type with two vane or single vane. semi-open single vane.Dual mechanical seal with pump side seal of silicon carbide vs. silicon carbide.

• length3 mtrs.

Vertical wet pit type with Pump submerged and motor at the top coupled by extended shaft. Available in SS, Ci, Cast Steel and rubber lined constructions. Column pipe and discharge pipe are mounted on the same motor stool frame, this enables to pull out the pump for maintenance purpose without emptying the pit.

• Vertical wet pit type with Pump submerged and motor at the top coupled by extended shaft. • Available in SS, Duplex steel, CI, Cast Steel and rubber lined constructions. • Available for column length upto 3 mtrs. • Heavy duty thrust bearing is used. Permanently lubricated durable lower bush bearing can be provided in Bronze, Teflon or Rubber etc. As per application. • Additional Intermediate bush bearing is provided after every one meter column length. • Ideal for handling liquid at high temperature or which are corrosive or inflamable. • Chokeless, screen less, and glandless pump with non-clog impeller. • Vertical flange mounted motor as prime mover