Adhesives #6610184

Product Description : Ready to Use, Higher Coverage, Fast Drying, High Bonding Strength. The Change in the customer liking technology has made increase demand for PVC and ACRALYIC sheet use in furniture industry. The Product gives excellent finish to the furniture making.

Areas of Application :

• Plywood to PVC sheets/ rolls
• Plywood to Acrylic sheets
• PVC edge Bonding
• Ply Board to Charcoal sheets

Application Methods :

• Apply glue on one edge surface of the Plywood / MDF / Particle Boord and spread the glue uniformly on the edge with the help of spreader/ spatula.
• Join PVC & apply pressure uniformly to ensure excess glue oozing out from the joint portion. Remove softly and carefully using cloth/cotton.
• Press the edge bond joint for 2 - 5 minutes under manual hand pressure. Use masking tape to hold the joint firmly. The bond strength is obtained within 4-6 hrs. Full strength will be developed after 24 Hrs. at room temp.
• For faster work within 1 Hr, wrap the edge with thick cotton cloth and apply heat using Iron for I minutes and repeat the steps for four to five times.

Product Features :

• Outstanding well suited with PVC and Acrylic
• High Strength with long & durable bonding
• Excellent Spread ability and High Coverage
• Excellent heot resistance

Product Benefits :

• Best solution for fixing Acrylic / PVC sheets
• Helpful for manual edge banding
• Good for PVC edge banding
• Saves cost
• Excellent for heat prone applications like kitchen or high temperature climatic zones.

Product Description : Heat Resistance, Water Proof bond, High Coverage, fast Drying. Weather change and continuous exposure to water and moisture expose furniture to stress. This could result in opening of joints and de-bonding of laminates in-spite of using good quality material. 'Ombond Waterproof Adhesives' is a specialized waterproof adhesive that protects furniture from de-bonding even when exposed to water.

Areas of Application :

• Bonds lumout, plywooa and other hard /soft wood. veneer. particle board. MDF, block board, hard board. etc.
• Spetially made for the handicraft industry and bonds all types of wood and ply to laminate. mainly in areas where furniture is affected by moisture/woter like kitchen, bathrooms, etc.

Application Methods :

• Surfaces to be bonded should be free from oil, grease. anddust and dinty
• Should be dry and properly leveled.
• For best results. roughen the surfaces to be bonded.
• Stir content of container before use.
• Apply even coats of OMBOND EB first on comparatively on porous surface for e.g. apply first on porous surface like plywood, MDF. particle board.
• Do not allow adhesive to dry. and bring both the surfaces in contact together, make proper alignment and start pressing from one side by using wet squeezed cloth to avoid bubbles, and ensuring uniform Contact and no At interruption between both the surfaces.
• Pressure can be given using nails ciarnbs, weight. masking tape etc.

Product Features :

• 2 hrs. boiling waterproof. 72 hrs. normal waterproof
• High Strength cross linking Adhesive
• Excellent Spread ability and High Coverage
• Excellent heat resistance '

Product Benefits :

• Save Cost
• Spread Easily
• Better Coverage
• Best Solutions for fixing
• Laminate. Plywood. Veneer. Matt any wood to wood bonding.
• Particle Board, Block Board to Laminate
• Excellent for heat prone applications like kitchen or high temperature climatic zones

Product Description : Made out of excellent quality material, the Ombond Membrane Press Adhesive offers you the binding quality that holds for a very long time. This is a good quality product that comes in a all type of packaging size and can be used in a large amount of industries. The adhesive is mainly used for handling the purposes of vacuum press and membrane machinery.

Area of Applications : PVC Foil to MDF Board

Application Methods :

• Surfaces to be bonded should be free from oil, grease. and dust and dirty.
• Should be dry and properly leveled.
• For best results, roughen the surfaces to be bonded.
• Stir content of container before use.
• Apply even coats of Membrain Adhesive first on comparatively on porous surface for e.g. apply first on porous surface like plywood, MDF. particle board.
• Do not allow adhesive to dry. and bring both the surfaces in contact together, make proper alignment and start pressing from one side by using wet squeezed cloth to avoid bubbles, and ensuring uniform contact and no air interruption between both the surfaces.
• Pressure can be given using machine or vacuum press, machine as per standard.

Product Features :

• Single Component
• Low heat activation
• Used in membrane ond vacuum press machines
• Excellent heat resistance
• Excellent spread availability and high coverage

Product Benefits :

• it is easy to applying and job thru spraying
• Saves cost
• Good adhesive strength

Product Description :Low cost adhesive. Mainly used for readymade furniture making and wood filling application.

Areas of Application :

• For mica pressing 0.8 mm.
• For wood filling.
• General purpose,

Application Methods :

• Surfaces to be bonded should. be free from oil. grease, and dust and dirty.
• Should be dry ane properly leveled.
• For best results, roughen the surfaces to be bonded.
• Stir content of container before use.
• Apply even coats of OMBOND Omcol first on comparatively on por, ous surface for e.g. apply first on porous surface like plywood. MDF. particle board.
• Do not allow adhesive fo dry. and bring both the surfaces in contact together, make proper alignment and start pressing from one side by using wet squeezed cloth to avoid bubbles, and ensuring uniform contact and no air interruption between both the surfaces.
• Pressure can be given using. nab, Clamps. Weight, masking tape etc.

Product Features :

• Excellent compatibility with Plywood and Lamination
• Moderate Strength with long and durable bonding
• Excellent Spread ability ond High Coverage

Product Benefits :

• Good for Lamination
• Cost Saver
• General purpose adhesive Non-critical Jobs.

Product Description :Ready to use, Higher Coverage, Fast Drying, High Bonding Strength. Omfix synthetic resin adhesive intended for wood working and various materials where one of the surfaces to be bonded is porous. Omfix bonds plywood. laminate MDF and all types of boards.

Areas of Application :

• Plywood to Laminate
• Manual Pressing
• Other general purposes

Application Methods :

• Surfaces to be bonded should be free from oil. grease, and dust and dirty.
• Should be dw and properly leveled.
• For best results. roughen the surfaces to be bonded.
• Stir content of container before Use.
• Apply even coats of OMFIX first on comparatively on porous surface for e.g. apply Tirst on porous surface like plywood, MDE particleboard.
• Do not allow adhesiveto dry; and bring both thé surfaces in contact together. make proper alignment, and start pressing from one side by using wet squeezed cloth to avoid bubbles and ensuring uniform contact and no air interruption between both thesüfoces.
• Pressure can be given using nails, clamps, weight. masking tape etc.

Product Features :

• Excellent compatibility with Plywood and Lamination
• High Strength with long & durable bonding
• Excellent Spread ability and HighCoverage
• Moisture Resistant

Product Benefits :

• For fixing lamination sheets fo ply.
• Good for Lamination.
• Cost saving solution.

Product Description : Ready to use, Higher Coverage, Fast Drying, High Bonding Strength. Ombond Regular synthetic resin adhesive intended for wood working and various materials where one of the surfaces to be bonded is porous. Ombond Regular strongly bonds plywood, laminate. MDF and all types of boards.

Areas of Application :

• Plywood to Laminate
• Hot Press / Cold Press
• Manual Pressing
• Other general purposes

Application_Methods :

• Surfaces to be bonded should be•free from oil. grease, *and dust and dirty.
• Should be dry angproperly leveled.
• For bestresults, rougQen the surfaces to be bonded.
• Stir contentof contaiher before use.
• Apply even coow of OMBOND Regular first on comparatively on porous surface for e.g. apply first on porous surface like plyWOod. MDE particle board.
• Do not allow adhesive to dry, and bring both the surfaces in contact together, make proper alignment and start pressing from one side-by usinO wet squeezed cloth to avoid bubbles, and ensuring Uniform contact and no air interruption between both the surfaces.
• Pressure can be .given using ails, clamps, weight, masking tape etc.

Product Features :

• Excellent compatibility with Plywood and Lamination
• High Strength with long & durable bonding
• Excellent Spread ability and High Coverage
• Impact Resistance
• Moisture Resistant

Product Benefits :

• Best Solution for fixing lamination sheets.
• Good for Lamination
• Saves Cost

Product Description : As per the varying expectations of our customers, we ore specialized in providing an enormous quality range of POLYGON" to our clients. This POLYGON D' is mainly used in furniture industry such as Lamimate pasting, Postforming. Finger Joint C Bud Jointing & several other applications. Offered products are known for their non-toxic and non flammable properties. Used for Hot Press. Cold Press & Postforming

Areas of Application :

• Bonds laminate. plywood and other hard /soft wood. veneer. particle board. MDF. block board, hard board, etc.
• Specially made for the handicraft industry and bonds all typds of wood and ply to laminate. mainly in areas where furniture is affected by moisture/water like kitchens. bathrooms. etc.

Application Methods :

• The surfaces to be bonded should be free from dust, oil and grease. They, should be dry and properly leveled.
• For best results. roughen the surfaces to be bonded
• Stir contents of the container before use
• Can be diluted with clean water by continuous stirring, if needed (More than clean water should not be used)
• Apply an even cOat of POLYGON 0 first on comparatively non-porous surfaces and then on porous surfaces
• Excellent flow and spreodibility that can give higher coverage
• For Ply to Laminate, Before agdwing adhesive to dry, bring both surfaces in contact, , align properly and start pressing from one side by using wet squeezed cloth to avoid bubbles, and ensure uniform contact.
• For Wood To Wood: Before allowing adhesive to dry. bring both the surfaces in conk:Ida-arid align properly To get best results keep them pressed for 24 hours.
• Excess adhesive that oozes out from edges should be wiped off with a wet squeezed cloth
• Pressure can be applied bY using no.% clarnps. weight. Cold Press. Hot Press. Roller Press, etc.
• if required. pressure can be released after 6 to 8 hours and the bonded assembly can be processed further.

Product Features :

• 2 hrs. boiling waterproof, 72 hrs. normal waterproof
• High Strength cross linking Adhesive
• Excellent Spread abijity and High Coverage
• Excellent heat resistance

Product Compliance :

• Standards : equivalent to din en 204 stress group D3, reach compliance, low voc / Free Formaldehyde.

Product Description : Ready to use, Higher Coverage, Fast Drying, High Bonding Strength. Ombond EB" is a Extra Bonding synthetic resin adhesive intended for wood working and various materials where one of the surfaces to be bonded is porous. Ombond Extra Bonding strongly binds wood, plywood, laminate, veneers, MDF and all types of boords.

Areas of Application :

• Plywood to Lominate
• Hot Press / Cold Press
• Manual Pressing
• Other general purposes

Application Methods :

• Surfaces to be, bonded should be free from oil, grease, and dust and dirty.
• Should be dry and properly leveled.
• For best results, roughen the surfaces to be bonded.
• Stir content of container before use
• Apply even coats of OMBOND EB first on comparatively on porous surface fore.g. apply first on porous surface like plywood, MDF, particleboard.
• Do not allow adhesive ro dry, and bring both the surfaces in contact together, make proper alignment and start pressing from one side by using wet squeezed cloth to ovoid bubble, and ensuring uniform contact and no air interruption between both the'surfaces.
• Pressure can be given using nails, clamps, weight, masking tope etc.

Product Features :

• Excellent compatibility with Plywood and Lamination
• High Strength with long & durable bonding
• Excellent Spread ability and High Coverage
• Excellent heat resistance '

Product Benefits :

• Best Solution for fixing lamination 'sheets Helpful
• Good for Lamination
• Saves Cost
• Excellent for heat prone applications like kitchen or high temperature climatic zones.

Product Description : Post Forming Adhesive is superior grade high performance water based poly vinyl acetate dispersion enriching with special additives. which has been developed especially for half round and full round F'ost Forming application.

Areas of Application :

• Half round Post Forming
• Full round Post Forming
• Finger Joints

Application Methods :

• Surfaces to be bonded should be free from oil. grease. and dust and dlrty.
• Should be dry and properly leveled.
• For best results. roeghen the surfaces to be bonded.
• Stir content of container before use.
• Apply even coats Of OMBOND Post Forming first on comparatively on porous surface for e.g. apply first on porous surface like Plywood, MDF, particle board.
• Do not allow adhesive to dry. and bring both the surfaces in contact together. make proPer alignment ana start pressing from one side by using net squeezed cloth to avoid bubbles, and ensuring uniform contact and no At interruption between both thesurfaces.
• Pressure con be given using Post Forming + Post Inks with different twining of cycles air Auto / Manual mode for Half Bound, Full Bound, Bull Nose, Duck BUll Nose etc.

Product Features :

• Superior high performance water based adhesive system.
• Low Viscosity product which can be applied by brush.
• Good Adhesion strength.
• The glue will not Bond under high temperature.
• No Colouiration, charming or 'fading in application.

Product Benefits :

• Best Solution for fixing laminate sheets for proper curve.
• Good adhesion strength
• Strong physical resistance against impacts after cured.

Product Description :Synthetic rubber based solvent containing contact adhesive. It develops initial strength faster and good contact ability. The adhesive dries to a tough, flexible, plastic film with good resistance to water and heat.

Areas of Application :

• For joining any two surfaces.
• For fast drying and urgent work process.

Application Methods :

• Surfaces to be bonded should be free from oil, grease. and dust and dilly.
• Should be dry and properly leveled.
• For best results, roughen the surfaces to be bonded.
• Stir content of cohtainer before use.
• Apply even coats Of OMBOND Heat Resistance Rubber Adhesive oii non-porous surface for e.g. apply first on porous surface like plywood. MDF, particle board.
• Allow adhesive to dry, and bring both the surfaces in contact together. stoke proper alignment and start pressing from one side by using wet squeezed cloth to avoid bubbles, and ensuring uniform contact and no air interruption between both the surfaces.
• Pressure can be given using nails. Clamps. Weight, masking tape etc.

Product Benefits :

• Fast working
• Quick results
• Saves Cost
• Multipurpose application

Product Features :

• Quick drying
• High Strength with long and durable bonding
• Easy to apply
• Good tack/grab with adequate tack retention time
• Bond both flexible and rigid substrates
• Exhibits outstanding bond to porous. non-porous substrates encountered in automotive. railway, vehicle building. electrical areas of ship building and many other industries