Auto Belt Loop Attaching Machine can be used for both jeans and casual pants: Belt loop choosing, cutting, folding and attaching with one-time completion.

Specification:

Power: Single Phase 220V- 240V, Air Pressure: 0.5 mpa (5kg/cm2), Work Clamp Lifting: 18mm, Needle: DP x 17 #19 - #21, Belt Loop Width:10-20mm, Belt Loop Length: 42-78mm (max. 90mm), Max. Speed: 2800 r.p.m.

ZJ2842-BD/ZJ2872-BD direct drive high-speed automatic thread cutting and double-needle feeding lockstitch sewing machine adopts a built-in direct-drive servo system to optimize the lockstitch joint technology.

The cloth is moved front and back by the needle. It can sew a parallel lockstitch at the same time.

The working area is expanded by 16.5mm*20mm and more comfortable.

This machine can sew thin or thick fabrics and is suitable for the sewing of raincoats. Jackets, shirts and other apparels

Easily adjust the postion of button holing, Much improve the work efficiency.The clamp foot can be lifted

mechanism and Knife mechanism produce low noise, and also starts, decelerates and stops smoothly

Floating Needle System was developed by AMF Reece to produce a true hand stitch. The machine uses a double pointed needle which has an eye in the middle. By the use of two needle bars, one above and one below the work plate, a length of thread is passed through the material duplicating the hand stitch with flawless consistency and incomparable speed

Other machines of this type, compared to the Deco 2000, use a single needle bar and an open eye hook type of needle. This type of needle makes larger penetration in the fabric, which can cause damage to lighter and more delicate fabrics by snagging the fabric. Our machine, Deco 2000, is the only real Imitation Hand Stitch machine ensuring consistent quality on all types of fabrics

AMF Reece offers different sizes of floating needles to insure high quality performance on different types of materials. It is necessary to use different needle bar kits for specific needles.

Needle Positioning Motor

The needle positioning motor automatically moves the needle to the correct position for turning the clothing garment. The operator can also automatically position the needle to enable threading

Thread Trimming Mechanism

The thread trimming mechanism allows the machine to handle standard polyester/ nylon cone threads. The trimming length is 400 - 900 mm depending on the sewn garment and can only be used when sewing the standard saddle stitch and its long/short variations. The required thread length is adjusted on the touch screen display

Reversed Stitching Function

Any type of stitches can be reversed by a simple touch of a button placed on the work desk, at any speed and time during the sewing cycle (e.g. at the jacket lapel break point). This increases productivity and minimizes thread waste.

High Sewing Speed

High Sewing Speed up to 500 spm makes the Deco 2000 ten times more productive than hand sewers, providing ensuring consistent quality.

PLC Microprocessor Control with Graphic Touch Screen

The display provides the operator with a user-friendly working environment. All operations such as stitch type, sewing speed, stitch length and thread trimming time etc., are performed using easily understood symbols, which require no language translation.

Wide Range of Stitch Types

Type of stitching can be easily selected by a simple touch of the screen, ranging from a pick stitch, saddle stitch to various style stitches (long and short variations), for which the length of the stitch can be precisely specified.

Customized Style Stitching

Unique customized decorative style stitching can be easily adjusted on the touch screen, in addition to the pick stitch, saddle stitch and long/short variations. Each custom stitch pattern comprises of a sequence of 10 different upper and 10 different lower stitch lengths.

Condensed Stitching Function

With the help of this optional accessory, it is not necessary to do separate bartacking operation to secure the beginning and end of the sewing. The operator easily sets the condensed stitch parameters - condensed length and stitch density on the touch screen display. The condense stitch can be activated anytime during the sewing cycle by pressing the left foot pedal.

Stitch Density- 5 to 30 Units

Max. Stitch Length- 300 Units

10 Units displayed on the touch screen constitute approximately 1 mm depending on the used material

Applications

The Deco 2000 machine can be used for a wide range of applications such as mens/ladies tailored jackets, suits, overcoats, leather wear, ladies blouses and in the car industry.

Typical Applications are:

Pick & Saddle Stitch- mens/ladies tailored jackets, suits and over coats, pockets, dart seams

Saddle Stitch- collars, cuffs, ladies blouses

Decorative Stitch- all types of leather garments

Suitable for simultaneous shirring of waist skirt-ruffling one-piece dress. Shirring proportion perfect stitching. Also more suitable for childrens wear bed-used stitching sewn pattern can be chosen different Cam.

Specification:

No. of Needles: 33

No. of Threads:66

Needle Gauge:3/16

Pressure Foot Lift: 12mm

Needle: DV x 57 #14-#18

Speed: 1500spm

APPLICATION

• Suitable for different types of carpet materials-tufted carpets, mats, table clothes.bed covers, shawls, sunblinds, etc

FETURES

• Automatic lubrication
• Produces the fringes simultaneously while it sews.

SPECIFICATIONS

• Fringe length adjustable from 4cm to 12cm
• High speed fingers with a production of 1000 stitches per min
• 13 to 35 fringes per 10cm(4)
• Needle type : 7712-330/280

Auto Belt Loop Attaching Machine can be used for both jeans and casual pants: Belt loop choosing, cutting, folding and attaching with one-time completion.

Specification:

Power: Single Phase 220V- 240V, Air Pressure: 0.5 mpa (5kg/cm2), Work Clamp Lifting: 18mm, Needle: DP x 17 #19 - #21, Belt Loop Width:10-20mm, Belt Loop Length: 42-78mm (max. 90mm), Max. Speed: 2800 r.p.m.

ZJ2842-BD/ZJ2872-BD direct drive high-speed automatic thread cutting and double-needle feeding lockstitch sewing machine adopts a built-in direct-drive servo system to optimize the lockstitch joint technology.

The cloth is moved front and back by the needle. It can sew a parallel lockstitch at the same time.

The working area is expanded by 16.5mm*20mm and more comfortable.

This machine can sew thin or thick fabrics and is suitable for the sewing of raincoats. Jackets, shirts and other apparels

Easily adjust the postion of button holing, Much improve the work efficiency.The clamp foot can be lifted

mechanism and Knife mechanism produce low noise, and also starts, decelerates and stops smoothly

Floating Needle System was developed by AMF Reece to produce a true hand stitch. The machine uses a double pointed needle which has an eye in the middle. By the use of two needle bars, one above and one below the work plate, a length of thread is passed through the material duplicating the hand stitch with flawless consistency and incomparable speed

Other machines of this type, compared to the Deco 2000, use a single needle bar and an open eye hook type of needle. This type of needle makes larger penetration in the fabric, which can cause damage to lighter and more delicate fabrics by snagging the fabric. Our machine, Deco 2000, is the only real Imitation Hand Stitch machine ensuring consistent quality on all types of fabrics

AMF Reece offers different sizes of floating needles to insure high quality performance on different types of materials. It is necessary to use different needle bar kits for specific needles.

Needle Positioning Motor

The needle positioning motor automatically moves the needle to the correct position for turning the clothing garment. The operator can also automatically position the needle to enable threading

Thread Trimming Mechanism

The thread trimming mechanism allows the machine to handle standard polyester/ nylon cone threads. The trimming length is 400 - 900 mm depending on the sewn garment and can only be used when sewing the standard saddle stitch and its long/short variations. The required thread length is adjusted on the touch screen display

Reversed Stitching Function

Any type of stitches can be reversed by a simple touch of a button placed on the work desk, at any speed and time during the sewing cycle (e.g. at the jacket lapel break point). This increases productivity and minimizes thread waste.

High Sewing Speed

High Sewing Speed up to 500 spm makes the Deco 2000 ten times more productive than hand sewers, providing ensuring consistent quality.

PLC Microprocessor Control with Graphic Touch Screen

The display provides the operator with a user-friendly working environment. All operations such as stitch type, sewing speed, stitch length and thread trimming time etc., are performed using easily understood symbols, which require no language translation.

Wide Range of Stitch Types

Type of stitching can be easily selected by a simple touch of the screen, ranging from a pick stitch, saddle stitch to various style stitches (long and short variations), for which the length of the stitch can be precisely specified.

Customized Style Stitching

Unique customized decorative style stitching can be easily adjusted on the touch screen, in addition to the pick stitch, saddle stitch and long/short variations. Each custom stitch pattern comprises of a sequence of 10 different upper and 10 different lower stitch lengths.

Condensed Stitching Function

With the help of this optional accessory, it is not necessary to do separate bartacking operation to secure the beginning and end of the sewing. The operator easily sets the condensed stitch parameters - condensed length and stitch density on the touch screen display. The condense stitch can be activated anytime during the sewing cycle by pressing the left foot pedal.

Stitch Density- 5 to 30 Units

Max. Stitch Length- 300 Units

10 Units displayed on the touch screen constitute approximately 1 mm depending on the used material

Applications

The Deco 2000 machine can be used for a wide range of applications such as mens/ladies tailored jackets, suits, overcoats, leather wear, ladies blouses and in the car industry.

Typical Applications are:

Pick & Saddle Stitch- mens/ladies tailored jackets, suits and over coats, pockets, dart seams

Saddle Stitch- collars, cuffs, ladies blouses

Decorative Stitch- all types of leather garments

Suitable for simultaneous shirring of waist skirt-ruffling one-piece dress. Shirring proportion perfect stitching. Also more suitable for childrens wear bed-used stitching sewn pattern can be chosen different Cam.

Specification:

No. of Needles: 33

No. of Threads:66

Needle Gauge:3/16

Pressure Foot Lift: 12mm

Needle: DV x 57 #14-#18

Speed: 1500spm

APPLICATION

• Suitable for different types of carpet materials-tufted carpets, mats, table clothes.bed covers, shawls, sunblinds, etc

FETURES

• Automatic lubrication
• Produces the fringes simultaneously while it sews.

SPECIFICATIONS

• Fringe length adjustable from 4cm to 12cm
• High speed fingers with a production of 1000 stitches per min
• 13 to 35 fringes per 10cm(4)
• Needle type : 7712-330/280