Post Buy Requirement
HE

Hamilton Electronics Pvt. Ltd

Add Review

Our Products

  1. Sensors 7 Products available
  2. Spying & Intelligence Devices

    2 Products available
  3. Level Switches

    2 Products available
  4. Switches And Switch Boxes

    2 Products available
  5. Magnetic Switch

    1 Products available
  6. Measuring Instruments & Equipment

    1 Products available
  7. Electronic Locks

    1 Products available
  8. Door & Window Fittings

    1 Products available
  9. Safety Lights

    1 Products available
  10. Electric Fittings And Components

    1 Products available
  11. Others Products 24 Products available

Sensors

We offer the best product range of Motion Sensor for Lights, Magnetic Float Sensors, PIR sensor, passive infrared sensor and Outdoor Pir Motion Sensor.

Motion Sensor For Lights

  • Specifications Power Source :
  • AC 220/240, 50Hz Max Lighting load :
  • 150/500Watt (Halogen tube) Detection angle :
  • up to 120 ° Detection range :
  • up to 14 Meters Time adjustment :
  • (10 ± 5) sec. to (4 ± 1 ) min Warm uptime :
  • about 1 min Mounting Height :

Model HC-150W

INTRODUCTION:

The infrared induced lamp has an infrared detector with it. When the thermal body moving in the darkness the detector will light the lamp automatically and turn off after a period of time set in advance.

Features :

  • PIR Motion Sensor with Floodlight
  • Day and Night mode
  • Time adjustment
  • Selectable sensitivity of the detector
View Complete Details

Magnetic Float Sensors

Float Sensor is an electrical ONOFF Switch, which operates automatically when liquid level goes up or down with respect to specified level. The Signal thus available from the Float Sensor can be utilized for control of a Motor Pump or an allied electrical element like Solenoid, Lamps, and Relays etc.Float Sensors contain hermetical sealed Reed Switch in the stem and a permanent Magnet in the Float. As the Float rises or falls with the level of liquid the Reed Switch is activated by Magnet in the Float.Hamilton Float Sensors are available in wide range according to operation material mounting methods to suit variety of individual application. These Float sensors are rugged, accurate and reliable in operation.
View Complete Details

PIR Sensor

Stand alone 220V AC operation Room Can switch light load of up to 300 WattsDetection Range 3m radius at 10ft height Lux Level Control - Time control Re-trigger Function Offices Conference Toilets Pantry Stores Stairways Lifts Lift Lobby Dining Area Canteen Basement Covered Parking Area Locker Safe Room in banks Vaults ATMs - Colleges Schools Institutes Multi- Apartment Complexes 1. Rated Voltage: 230V AC 50Hz2. Load Wattage: Max.1500W incandescent bulb or Max. 300W fluorescent lamp3. Detection Area: Max. 5 Meters in radius4. Detection Angle : 360 around5. Time delay : From 10 5 seconds to 4 1 minutes adjustable
View Complete Details

Passive Infrared Sensor

  • Power supply 9 – 16 VDC, 12 VDC typical
  • DimensionS 100 x70x70mm 3
Powerful accessory for your Alarm kit. It detects up to 10 meters above the floor of any warmth objects moving or passing in front. It is very sensitive that will be triggered by heat. We recommend the unit to be mounted with in a room at a flat gentle surface (at a corner will provide a better detection) with at least 2 meters above the floor.
View Complete Details

Outdoor Pir Motion Sensor

  • Specifications Detection Method
  • Passive Infrared Detection Area
  • 40ft X 50ft (12Meters X 15Meters) 120º C Coverage Multi – Level Area
  • 40 Zones Pet Alley Area
  • 18 Zones Mounting Height Multi – Level Area
  • 8.3ft (2.5Meters) max Pet Alley Area
  • 4-5ft (1.2-1.5Meters) Detection Speed
  • 1-3.3ft/sec. (0.3-1.0m/sec.) Sensitivity Adjustment
  • Selectable 3position ( H,M,L ) LED Indicator
  • LED light during detection Alarm Period
  • 2 ± 1 sec. (Delay Timer) Alarm Output
  • NC. NO.28V DC 0.2A max Tamper Switch
  • Opens when cover removed. Pulse Count
  • 2 ( 20 ± 5 sec. ) or Test ( 1 pulse) Day/ Night Mode adjustment
  • Approx. 10 to 100,000 lux Warm up period
  • Approx. 60 sec Power input
  • 10.8- 13.2 VDC Current draw
  • 25 mA max Mounting
  • Wall ( Indoor/ Outdoor) Operating temperature
  • -4 ° F-+ 122 ° F ( -20 °C-+50°C) Weight

INTRODUCTION:Optex Outdoor Passive Infrared Detector, LX 402 is a fully automatic outdoor sensor with 120 C wide angle. LX- 402 has selectable Detection area patterns with day/ night mode. It can be installed outdoor & indoor with water- resistant and weatherproof features.

FEATURES :

  1. Selectable Detection area patterns
  2. Day/ Night mode also.
  3. Ceiling & Wall mounting
  4. Waterproof & Weatherproof
  5. Selectable Sensitivity
  6. Form C Relay output

APPLICATIONS:

Halls, Stair Wells, Public Area, Offices, Corridors, Basements etc.

View Complete Details

Ceiling Mount PIR Sensor

  • Specifications Operating Voltage
  • 9 – 16 V DC Consumption Current
  • Less than 18mA (12V DC) Operating Temperature
  • - 10 to +50 degree Installation Mode
  • Ceiling Mount Installation Height 
  • 1.7 ~3.6m Detection Distance  
  • 8meters Detection Angle
  • 360 degree Alarm Output
  • Relay output: N.O. / N.C. Optional Anti-dismantle Switch 
  • N.C. Dimension 

Main Feature:-

Fireproof ABC HousingLED ON/ OFF OptionalAutomatic Temperature CompensationSMT Adopted, Anti-RFI & Anti-EMIPulse Count OptionalAlarm Output N.C. / N.O. Optional

View Complete Details

Glass Break Sensor

  • Features Piezoelectric Style, No power supply is required
Accurately and effectively detect the strike of glass. The GS-380 series comes with superior design for high performance and effective glass striking detection.Unique circuit and structure designs provide greater stability against false alarms cause from any environmental vibration.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us