Our Products
The Decora tubes is the household users partner for life. It is a non-reinforced general purpose tube which comes as transparent, coloured or plain opaque according to specifications. This Hose is light, flexible and to be used in low pressure condition. It is available in various sizes [diameter 4.5mm to 50mm] as well as thickness. [0.75mm to 6mm]. P.V.C. Tubes can be supplied in food grade non-toxic form on request. |
Application |
|
Home Products Jolly Hose Clamp |
Material |
The material used in band and housing is low carbon steel as per specifications derived by I.S.I. The screw is manufactured from free cutting steel confirming to its standard grades. The material used in the manufacturing of 'JOLLY' brand clamps are procured from well reputed manufacturers with quality assurance test certificates. |
Finish |
The various parts of the clamp are given a smooth, polished finish and are free from rough and sharp throbbing edges. All the parts of the clamp are zinc plated with yellow passivation meeting to I S specifications. The Jolly hose clamp is a multi-utility clamp specially designed to cover a wide range of diameters suitable to meet multiple utility areas. They are specially designed for reliance in withstanding HIGH PRESSURES and HIGH STRESSES. JOLLY CLAMPS are given a unique Space saving symmetrical design making it highly suitable for installation where limited space is available. |
Example |
ITEM NO. 2A: 38-50 JOLLY SIZE NO.: 2 A (This is as per IS 4762 : 50) CLAMPING RANGE. 38- 50 This means it is suitable for diameters between 38 mm. And 50 mm. However if the clamps are used for other than the specified range then proper functioning as desired may not be obtained. |
Jolly Clamps are Specially Advantageous like |
|
Worm Drive Hose Clamps & Fitment Tool | ||||||||||||||||
General Uses at | ||||||||||||||||
|
Ron Ba Popular and The First Choice Of Engineers. |
By adopting most modern technology coupled with the use of latest machineries and product quality check - ups at every step of manufacturing with the guidance of our R&D . wing till the final stage, our brand of Brake lining are manufactured for the best satisfaction of the end- users. RON brand assure - highest quality, utility value and the ultimate need of the user i.e. SAFETY. RON BA is the first choice of the engineers of all industrial activites. S.R.A. make RON brand industrial brake lining is impregnated woven Asbestos based friction marerial and reinforced with brass wire which strength is future achieved as the basic Asbestos belt is woven on modern mechanised powerloom. RON B.A. brake lining has a medium to high co -efficient of friction combined with excellent resistivity to temperature and wear. |
Product Profile |
RON Brand Brake Lining is markated as a black - colour woven friction material impregenated with special type polymeric medium. It is a liner with medium friction composition . The co - efficient of fricition remains constant over a wide range of tempeture .The development of heat is controlled through dissipation of heat in the system This liner is based on woven asbestos composition metallic or nonmetaillic type end therfore imparts maximum flexibility in all operating conditions .The binding material has been specially designed to resist all types of micro and macro vibrations and has no loss of flexibility and hardness on prolongned heat development in different environmental and application conditions. The composition has been evaluated in severe condition and found to give most satisfactory results without any possibility of break down at any stage. In this composition, unlike other lining, special ingrediants have been incoporated to resist action of water, heat, acid and alkalies. Presence of solvent resistant components makes it outstanding in solvent resistant properties and the product is, therefore unaffected by spilage of solvent and greases. In this composition interaction of solid reinforcing agent and the polymeric binding materials yield an optimum heterogenity to yield maximum mechanical properties in this system. Further the amorophus nature of the reinforcing agent contribute to maximum mechanical flexibility without affecting hardness and adhesion, thus resulting in excellent resistant to micro and macro vibrations which are likely to occur in the equipment and machineries during operating conditions. Excellent thermal conductivity combined with extermely low wear characteristics, the materials is suitable for number of applications. Antifade property is another feature of the brake lining. "RON" Brand woven Brake Lining is supplied in roll from and therefore can be cut to any size and diameter according to the need to the customer. The liner is available is rolls of 15mtrs lengh and the surface is unground and is suitable for use under dry operating condition. and in thickness ranging between 6.4 to 19.1 mm and thick 4.8 m.m to19m.m and width from 25.4mm to 463.6 mm. The width is maintained between + 0.8 mm. to -0.8 mm. Also supplied in cut sizes as asked for. |
Application |
"RON" Brand Bonded Asbestos Industrial Brake Lining" are sutiable for a great variety of brake & clutch components in the general industrial field such as industrial band and drum brake linings (e.g., Cranes, lifts, excalator, Winches, concrete mixtures, drop hammers, mining equipments, Winding appliances, ground haulages, tippers, oil welldraw works, road rollers drilling units sugar mill centrifugals) |
Description of Ron Ba With Technical Datas |
General Description |
Flexible, solid woven asbestos based made of yarh confiring I.S. specification I.S. 4687/1980 spun around brass copper wire for additional strength in the product. 'BA' is unground on both side and the colour is black. |
Tech Datas |
|
Description of Ron Ba With Technical Datas |
Mating Surface |
Close grain or alloy cast iron. if steel forged or cold Profused with brikall hardness 200 or above, Cast Steel not recommended. |
Machining Tools |
High speed steel tools are considered satisfactory. (Technical Datas are based on international standard test methods) Note: the continuous Temp. indicated is for constant slip condition, for intermittent applicable, bulk temp. of 160 are acceptable for long period0 |
Type No. | Shaft | Dimensions (mm) | Boit size (mm) | Bearing No. | Housing No. | |||||||||||
d | H | L | J | A | N | N1 | H1 | HO | S | B | A4 | |||||
(in.) | (mm.) | |||||||||||||||
UCP204 | 20 | 33.3 | 127 | 96 | 37 | 13 | 16 | 14 | 65 | 12.7 | 31 | 45 | 10 | UC204 | P204 | |
UCP204-12 | 3/4 | UC204-12 | P204 | |||||||||||||
UCP205 | 25 | 36.5 | 140 | 105 | 38 | 13 | 19 | 15 | 71 | 14.3 | 34 | 48 | 10 | UC205 | P205 | |
UCP205-16 | 15/16 | UC205-16 | P205 | |||||||||||||
UCP206 | 30 | 42.9 | 160 | 121 | 44 | 14 | 19 | 16 | 83 | 15.9 | 38.1 | 52 | 12 | UC206 | P206 | |
UCP206-18 | 11/8 | UC206-18 | P206 | |||||||||||||
UCP207 | 35 | 47.6 | 167 | 126 | 48 | 15 | 19 | 17 | 93 | 17.5 | 42.9 | 59 | 12 | UC207 | P207 | |
UCP207-20 | 11/4 | UC207-20 | P207 | |||||||||||||
UCP208 | 40 | 49.2 | 180 | 136 | 52 | 15 | 21 | 18 | 100 | 19 | 49.2 | 68 | 12 | UC208 | P208 | |
UCP208-24 | 11/2 | UC208-24 | P208 | |||||||||||||
UCP209 | 45 | 54 | 189 | 146 | 54 | 15 | 21 | 20 | 108 | 19 | 49.2 | 70 | 12 | UC209 | P209 | |
UCP209-28 | 13/4 | UC209-28 | P209 | |||||||||||||
UCP210 | 50 | 57.2 | 204 | 159 | 57 | 19 | 22 | 21 | 114 | 19 | 51.6 | 75 | 16 | UC210 | P210 | |
UCP210-32 | 2 | UC210-32 | P210 | |||||||||||||
UCP211 | 55 | 63.5 | 217 | 172 | 60 | 19 | 22 | 22 | 126 | 22.2 | 55.6 | 78 | 16 | UC211 | P211 | |
UCP211-32 | 2 | UC211-32 | P211 | |||||||||||||
UCP212 | 60 | 69.9 | 238 | 185 | 66 | 19 | 25 | 24 | 138 | 25.4 | 65.1 | 91 | 16 | UC212 | P212 | |
UCP212-36 | 21/4 | UC212-36 | P212 | |||||||||||||
UCP213 | 65 | 76.2 | 262 | 203 | 70 | 23 | 29 | 26 | 151 | 25.4 | 65.1 | 98 | 20 | UC213 | P213 | |
UCP213-40 | 21/2 | UC213-40 | P213 | |||||||||||||
UCP214 | 70 | 79.4 | 266 | 210 | 72 | 23 | 29 | 27 | 157 | 30.2 | 74.6 | -- | 20 | UC214 | P214 | |
UCP214-40 | 3/4 | UC214-40 | P214 | |||||||||||||
UCP215 | 75 | 82.6 | 274 | 217 | 74 | 25 | 29 | 28 | 164 | 33.3 | 77.8 | -- | 20 | UC215 | P215 | |
UCP215-48 | 3 | UC215-48 | P215 | |||||||||||||
UCP215-48 | 80 | 88.9 | 292 | 232 | 78 | 25 | 30 | 30 | 175 | 33.3 | 82.6 | -- | 20 | UC216 | P216 | |
UCP217 | 85 | 95.2 | 310 | 247 | 83 | 25 | 30 | 32 | 187 | 34.1 | 85.7 | -- | 20 | UC217 | P217 | |
UCP218 | 90 | 101.6 | 326 | 262 | 88 | 27 | 30 | 33 | 200 | 39.7 | 96 | -- | 22 | UC218 | P218 |
Welding Cable is used in welding tools, usually as a secondary cable to power the electrode of the welding mechanism. The welder will attach two different cables to his electric arc-welding tool, one cable to power device and a secondary circuit for the electrode itself. Most arc-welding generators have system that requires this secondary power source for operation. While the welding cable does not provide primary power for the generator or allow it to function, it does allow the electrode to function Welding cable is used to power the secondary circuit of electric arc-welding generators, the circuit that controls the electrode that emits the charge used to weld. This cable is made from flexible copper wire surrounded by a protective covering that is resistant to flame, heat, oil and abrasions, among other things, Because welding cable is used for rough conditions where it can be exposed to heat, sparks, weight and possibly accidents, it is constructed to be durable. The outer covering of Neoprene or EPDM rubber is made to withstand flame, spark, heat, abrasions, oil, tar and grease while letting you use it in both wet and dry conditions. Inside, the wiring is rated at 60, 75 or 90 degrees Celsius, showing what temperatures it can handle, and at 100 or 600 volts.
Regal Welding Cable |
Industrial Grade Welding |
Characteristics: |
|
Are available with various types, grades and profiles with and without fabric insertion, it is also available with cushion back (fabric impression back) in various thickness, Range from 8 mm to 50 mm, width upto 1500 mm. with different patterns and also available in continues lengths of 10, 20, 50, 100 to 200 metres. Application:
Cutting Blowpipes |
Features |
|
|
Working Temp : - 40 C to + 90C
Application :Ideally as suction and transport hose for abrasive solids such as dust, powders, wood chips, granulates, oil fuel and etc. Also very suitable for ventilation system and industrial vacuum cleaner