Post Buy Requirement
HP
Kolkata, West Bengal, India
Add Review

Other Products / Services #305268

Roof Coatings

All the materials used for construction of building absorb and transfer heat inside of the building all the day. Heat always flow from the warmer side to cooler side and cooler to warmer side. 80% to 95% of heat gain during summer and about 70% of heat loss during winter trasferred through the walls, ceiling and roofs of the building by way of conduction and radiation. The conventional insulation only slows down the rate of heat transfer which after saturation cannot stop radiant heat.
View Complete Details

Welding Compounds

The down-time, shut down, profit loss, energy decline, safety hazards pose major threat to many Industries. Monarch's SavesPast range of Epoxy Cold Welding Compound offers wide range of products and service during routine and unexpected maintenance to solve the maintenance issues that arise from machinery and equipment break-downs and failures across wide spectrum of Industries. These 2 component epoxy putties containing Resin and Hardener which after mixing hardens to a firm metal like material, well adhering to almost any kind of surface. It rebuilds worn-out surface to the original specifications, in most of the cases in less than 2 hours down-time saving huge inventory replacement cost. The surface of the base substrate is not altered as in case of soldering or welding and no thermal stresses are induced during repair. The cured mass can be painted, sanded, machined, tapped, ground, filed or drilled.
View Complete Details

HDPE Yarn

HD T10 is a HDPE yarn monofilament grade produced by Spherilene TechnologyThis grade can be used in yarns monofilament for Fabrics, Nets, Twines & RopesHD T10 is characterized by excellent processability and mechanical strength
View Complete Details

Hm Hdpe Bags

F5400 is a film grade HM-HDPE manufactured using the Mitsui CX Technology. This grade ischaracterized by excellent processability and high mechanical strength.F5400 can be used for general-purpose films as well as very thin reinforced bags.
View Complete Details

Reschel Bags

These products from HPL are of benchmark quality, meeting the highest international standards and are used extensively by packaging, consumer durables, houseware, automobiles, furniture, container or luggage manufacturers in India and abroad. Due to superior quality, HPL products are in demand in various countries from EU, South East Asia, USA etc. HPL products are exported to more than 20 countries in the world.
View Complete Details

Epoxy Floor Topping

The flooring is the most abusive part of any Industrial, Commercial or Institutional Building exposing to both physical and chemical abuses like presence of dust, continuous equipment traffic, oil and chemical spillages from occasional to continuous immersion leading to degradation of floor surfaces. Monarchs FloorClad Floor Screeds & Toppings offers Seamless high performance flooring system with high chemical, bacterial and abrasion resistance to enhance floor design life. The ultimate convenience of easy to clean surface with increased resistance to liquid penetration. The toughness and durability of the hygienic coating along with choice of attractive colors suits to variety of environmental conditions. The coated decorative surface presents ideal and pleasant working atmosphere. FloorClad have wide options of underlayment, screed mortars and floor toppings. The comprehensive range covers - cementitious underlayment, coving, floor marking, re-lay over- lay coatings, epoxy and polyurethane based mortars and floor toppings, anti static ESD conductive floor toppings, poly urea coatings, slip resistant and chemical resistant toppings and silicate floor coatings.
View Complete Details

Crusher Backing Compound

Monarch's KrushMore crusher compound is 100% solids epoxy compound for backing wear plates in cone and gyratory crushers offering extreme heavy duty crushing, maximum protection, positive support of wear liners and high volumetric stability. The compound completely eliminates voids, misalignment and gaps between liners replacing conventional molten zinc pours which are dangerous and costly. These crushers are used in applications for the reduction of materials like roke, iron ore, gypsum, river gravel, limestone, basalt, gapbbro, magnetite and also for the aggregate crushing.
View Complete Details

Cyclopentane

Benzene is an organic chemical compound. It is an aromatic hydrocarbon composed of 6 carbon atoms in a ring, with 1 hydrogen atom attached to each carbon atom, with the molecular formula C6h5.Benzene is a natural constituent of crude oil, and is one of the most basic petrochemicals. It is a colorless and highly flammable liquid with a sweet smell.Benzene is an important precursor to basic industrial chemicals including drugs, plastics, synthetic rubber, and dyes. It is mainly used as an intermediate chemical to make downstream industrial chemicals to be further used in value chain for manufacturer of end use products. Its most widely-produced derivatives include-Styrene, used to make polymers, plastics and synthetic rubber
View Complete Details

Lldpe Sheet

71602W is a LLDPE film grade produced by the Spherilene Technology71602W is without slip additives and antiblock & can be used in General Purpose Packaging FilmApplicationThe precise morphological control achieved during polymerization confers good processability &mechanical strengthsProperty T
View Complete Details

Lldpe Film

HPL also manufacturers various grades of LLDPE in the swing LLDPE plant using Spherilene Gas Phase Swing Process from Basell, Netherlands. The LLDPE plant is the 3rd such plant worldwide using above technology and is used for manufacturing of various HDPE grades too.These products from HPL are of benchmark quality, meeting the highest international standards and are used extensively by packaging, consumer durables, houseware, automobiles, furniture, container or luggage manufacturers in India and abroad. Due to superior quality, HPL products are in demand in various countries from EU, South East Asia, USA etc. HPL products are exported to more than 20 countries in the world.
View Complete Details

Benzene

Benzene is an organic chemical compound. It is an aromatic hydrocarbon composed of 6 carbon atoms in a ring, with 1 hydrogen atom attached to each carbon atom, with the molecular formula C6h5.Benzene is a natural constituent of crude oil, and is one of the most basic petrochemicals. It is a colorless and highly flammable liquid with a sweet smell.Benzene is an important precursor to basic industrial chemicals including drugs, plastics, synthetic rubber, and dyes. It is mainly used as an intermediate chemical to make downstream industrial chemicals to be further used in value chain for manufacturer of end use products. Its most widely-produced derivatives include-Styrene, used to make polymers, plastics and synthetic rubberPhenol (via cumene), for drugs, synthetic resins and adhesivesCyclohexane, used for Caprolactum in manufacture of NylonNitrobenzene for Aniline used for MDI (for polyurethane) and dyestuffsChlorobenzene, used for pesticides (DDT) , herbicides and solventsAlkyl Benzene, for LAB Sulphonate used for laundry detergents & industrial cleaners
View Complete Details

Polypropylene Copolymer

HPL manufactures 3, 41, 000 tonnes polypropylene per annum using Spheripol-II technology supplied by Basell, Netherlands. Spheripol process is the most widely accepted technology for manufacturing Homopolymers and Copolymer grades. The unique process capabilities and high consistency in product morphology ensure excellent quality.These products from HPL are of benchmark quality, meeting the highest international standards and are used extensively by packaging, consumer durables, houseware, furniture, container or luggage manufacturers in India and abroad. Due to superior quality, HPL products are in demand in various countries from EU, South East Asia, USA etc. HPL products are exported to several countries in the world.
View Complete Details

Solar Reflective Coating

All the materials used for construction of building absorb and transfer heat inside of the building all the day. Heat always flow from the warmer side to cooler side and cooler to warmer side. 80% to 95% of heat gain during summer and about 70% of heat loss during winter trasferred through the walls, ceiling and roofs of the building by way of conduction and radiation. The conventional insulation only slows down the rate of heat transfer which after saturation cannot stop radiant heat.
View Complete Details

Polybutadiene Rubber

Cyclopentane is a flammable alicyclic hydrocarbon with chemical formula C5H10.Cyclopentane is mainly used as Green blowing agent in Polyurethane foam used for thermal insulation in refrigerators, freezers, water heaters, insulated pipes & roofs, construction panels, etc. Cyclopentane is also used in the manufacture of resin, adhesives, pharma intermediate and as a gasoline additive as octane booster.Cyclopentane being halogen free compound is environment friendly with Zero-Ozone Depletion Potential and thus is fast replacing Chloro Fluoro Carbon (CFC ) applications in refrigeration and thermal insulation.
View Complete Details

Hh Bags

hese products from HPL are of benchmark quality, meeting the highest international standards and are used extensively by packaging, consumer durables, houseware, automobiles, furniture, container or luggage manufacturers in India and abroad. Due to superior quality, HPL products are in demand in various countries from EU, South East Asia, USA etc. HPL products are exported to more than 20 countries in the world.
View Complete Details

Polypropylene Homopolymer

HPL manufactures 3, 41, 000 tonnes polypropylene per annum using Spheripol-II technology supplied by Basell, Netherlands. Spheripol process is the most widely accepted technology for manufacturing Homopolymers and Copolymer grades. The unique process capabilities and high consistency in product morphology ensure excellent quality.These products from HPL are of benchmark quality, meeting the highest international standards and are used extensively by packaging, consumer durables, houseware, furniture, container or luggage manufacturers in India and abroad. Due to superior quality, HPL products are in demand in various countries from EU, South East Asia, USA etc. HPL products are exported to several countries in the world.Major Brands, Grades End Uses
View Complete Details

Octane Booster

Benzene is an organic chemical compound. It is an aromatic hydrocarbon composed of 6 carbon atoms in a ring, with 1 hydrogen atom attached to each carbon atom, with the molecular formula C6h5.Benzene is a natural constituent of crude oil, and is one of the most basic petrochemicals. It is a colorless and highly flammable liquid with a sweet smell.Benzene is an important precursor to basic industrial chemicals including drugs, plastics, synthetic rubber, and dyes. It is mainly used as an intermediate chemical to make downstream industrial chemicals to be further used in value chain for manufacturer of end use products. Its most widely-produced derivatives include-Styrene, used to make polymers, plastics and synthetic rubberPhenol (via cumene), for drugs, synthetic resins and adhesivesCyclohexane, used for Caprolactum in manufacture of NylonNitrobenzene for Aniline used for MDI (for polyurethane) and dyestuffsChlorobenzene, used for pesticides (DDT) , herbicides and solventsAlkyl Benzene, for LAB Sulphonate used for laundry detergents & industrial cleaners
View Complete Details

PPp Raffia Granules

HPL manufactures 3, 41, 000 tonnes polypropylene per annum using Spheripol-II technology supplied by Basell, Netherlands. Spheripol process is the most widely accepted technology for manufacturing Homopolymers and Copolymer grades. The unique process capabilities and high consistency in product morphology ensure excellent quality.These products from HPL are of benchmark quality, meeting the highest international standards and are used extensively by packaging, consumer durables, houseware, furniture, container or luggage manufacturers in India and abroad. Due to superior quality, HPL products are in demand in various countries from EU, South East Asia, USA etc. HPL products are exported to several countries in the world.Major Brands, Grades End Uses
View Complete Details

Soft Luggage

HPL manufactures 3, 41, 000 tonnes polypropylene per annum using Spheripol-II technology supplied by Basell, Netherlands. Spheripol process is the most widely accepted technology for manufacturing Homopolymers and Copolymer grades. The unique process capabilities and high consistency in product morphology ensure excellent quality.These products from HPL are of benchmark quality, meeting the highest international standards and are used extensively by packaging, consumer durables, houseware, furniture, container or luggage manufacturers in India and abroad. Due to superior quality, HPL products are in demand in various countries from EU, South East Asia, USA etc. HPL products are exported to several countries in the world.Major Brands, Grades End Uses
View Complete Details

Gasoline

Raw Pyrolysis Gasoline (RPG) is an aromatics-rich naphtha-range stream produced in sizeable quantities by an ethylene plant when it cracks naphtha, butane or gasoil. Raw Pygas resembles reformate. It can serve as a high-octane blendstock for motor gasoline or as a feedstock for an aromatics extraction unit.Hydrogenated Pyrolysis Gasoline (HPG) obtained from RPG post Benzene extraction and is used as chemical feedstock for Aromatics Toluene, mix-Xylene and low & heavy grade Fuel Oil. It is also used as gasoline blending component.
View Complete Details

Titanium Putty

Multi-Purpose Reclamation Putty for high temperature resistance till 230C A two component paste, engineering grade system based on a ferro-silicon filled epoxy system on high temperature resistance special resin. The non-rusting putty extensively used for repairing and rebuilding worn-out surfaces in machinery & equipment and precision critical applications in less down-time for high temperature service conditions. The high temperature putty requires post-curing for proper performance and temperature resistance. To achieve permanent temperature resistance do POST CURINGTEMPER HARDENING:High temperatures putty under ambient temperature conditions will take some time to cure to its ultimate properties. Post curing in an oven or by using heat lamps, to a maximum temperature of 150C for 2 hours, will result in rapid achievement of full cure properties. In-situ cure at the normal process operating temperatures will provide cured properties and an ultimate cure rate consistent with the process temperature.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Haldia Petrochemicals Limited (Haldia Petrochemicals Limited)
  • Tower 1, Bengal Eco Intelligent Park (Techna) Block EM, Plot No 3, Sector V, Salt Lake PO: Bidhan Nagar, District: North 24 Paraganas Kolkata 700091, West Bengal
  • Share us via
List of Other Products by Haldia Petrochemicals Limited from Kolkata, West Bengal.
Post Buy Requirement
HP

Haldia Petrochemicals Limited Kolkata, West Bengal

Kolkata, West Bengal, India
Add Review

Other Products / Services #305268

Our Complete range of products are Hm Hdpe Bags, Reschel bags, Hh bags, pPp raffia granules and HDPE Bags.

Roof Coatings

All the materials used for construction of building absorb and transfer heat inside of the building all the day. Heat always flow from the warmer side to cooler side and cooler to warmer side. 80% to 95% of heat gain during summer and about 70% of heat loss during winter trasferred through the walls, ceiling and roofs of the building by way of conduction and radiation. The conventional insulation only slows down the rate of heat transfer which after saturation cannot stop radiant heat.
View Complete Details

Welding Compounds

The down-time, shut down, profit loss, energy decline, safety hazards pose major threat to many Industries. Monarch's SavesPast range of Epoxy Cold Welding Compound offers wide range of products and service during routine and unexpected maintenance to solve the maintenance issues that arise from machinery and equipment break-downs and failures across wide spectrum of Industries. These 2 component epoxy putties containing Resin and Hardener which after mixing hardens to a firm metal like material, well adhering to almost any kind of surface. It rebuilds worn-out surface to the original specifications, in most of the cases in less than 2 hours down-time saving huge inventory replacement cost. The surface of the base substrate is not altered as in case of soldering or welding and no thermal stresses are induced during repair. The cured mass can be painted, sanded, machined, tapped, ground, filed or drilled.
View Complete Details

HDPE Yarn

HD T10 is a HDPE yarn monofilament grade produced by Spherilene TechnologyThis grade can be used in yarns monofilament for Fabrics, Nets, Twines & RopesHD T10 is characterized by excellent processability and mechanical strength
View Complete Details

Hm Hdpe Bags

F5400 is a film grade HM-HDPE manufactured using the Mitsui CX Technology. This grade ischaracterized by excellent processability and high mechanical strength.F5400 can be used for general-purpose films as well as very thin reinforced bags.
View Complete Details

Reschel Bags

These products from HPL are of benchmark quality, meeting the highest international standards and are used extensively by packaging, consumer durables, houseware, automobiles, furniture, container or luggage manufacturers in India and abroad. Due to superior quality, HPL products are in demand in various countries from EU, South East Asia, USA etc. HPL products are exported to more than 20 countries in the world.
View Complete Details

Epoxy Floor Topping

The flooring is the most abusive part of any Industrial, Commercial or Institutional Building exposing to both physical and chemical abuses like presence of dust, continuous equipment traffic, oil and chemical spillages from occasional to continuous immersion leading to degradation of floor surfaces. Monarchs FloorClad Floor Screeds & Toppings offers Seamless high performance flooring system with high chemical, bacterial and abrasion resistance to enhance floor design life. The ultimate convenience of easy to clean surface with increased resistance to liquid penetration. The toughness and durability of the hygienic coating along with choice of attractive colors suits to variety of environmental conditions. The coated decorative surface presents ideal and pleasant working atmosphere. FloorClad have wide options of underlayment, screed mortars and floor toppings. The comprehensive range covers - cementitious underlayment, coving, floor marking, re-lay over- lay coatings, epoxy and polyurethane based mortars and floor toppings, anti static ESD conductive floor toppings, poly urea coatings, slip resistant and chemical resistant toppings and silicate floor coatings.
View Complete Details

High Density Polyethylene

Haldia Petrochemicals Limited is the second largest manufacturer of polyethylene in India with a total capacity of over 7, 00, 000 tonnes per annum. It caters to more than 70% of the demand in eastern India and 30% on overall country basis. The product portfolio under polyethylene segment consists of various grades of High Density Polyethylene (HDPE) and Linear Low Density Polyethylene (LLDPE).HPL manufactures a wide range of HDPE grades having narrow, medium & broad (bi-modal) molecular weight distribution using Mitsui Slurry CX Process to suit a wide range of end uses
View Complete Details

Crusher Backing Compound

Monarch's KrushMore crusher compound is 100% solids epoxy compound for backing wear plates in cone and gyratory crushers offering extreme heavy duty crushing, maximum protection, positive support of wear liners and high volumetric stability. The compound completely eliminates voids, misalignment and gaps between liners replacing conventional molten zinc pours which are dangerous and costly. These crushers are used in applications for the reduction of materials like roke, iron ore, gypsum, river gravel, limestone, basalt, gapbbro, magnetite and also for the aggregate crushing.
View Complete Details

Cyclopentane

Benzene is an organic chemical compound. It is an aromatic hydrocarbon composed of 6 carbon atoms in a ring, with 1 hydrogen atom attached to each carbon atom, with the molecular formula C6h5.Benzene is a natural constituent of crude oil, and is one of the most basic petrochemicals. It is a colorless and highly flammable liquid with a sweet smell.Benzene is an important precursor to basic industrial chemicals including drugs, plastics, synthetic rubber, and dyes. It is mainly used as an intermediate chemical to make downstream industrial chemicals to be further used in value chain for manufacturer of end use products. Its most widely-produced derivatives include-Styrene, used to make polymers, plastics and synthetic rubber
View Complete Details

Lldpe Sheet

71602W is a LLDPE film grade produced by the Spherilene Technology71602W is without slip additives and antiblock & can be used in General Purpose Packaging FilmApplicationThe precise morphological control achieved during polymerization confers good processability &mechanical strengthsProperty T
View Complete Details

Lldpe Film

HPL also manufacturers various grades of LLDPE in the swing LLDPE plant using Spherilene Gas Phase Swing Process from Basell, Netherlands. The LLDPE plant is the 3rd such plant worldwide using above technology and is used for manufacturing of various HDPE grades too.These products from HPL are of benchmark quality, meeting the highest international standards and are used extensively by packaging, consumer durables, houseware, automobiles, furniture, container or luggage manufacturers in India and abroad. Due to superior quality, HPL products are in demand in various countries from EU, South East Asia, USA etc. HPL products are exported to more than 20 countries in the world.
View Complete Details

Benzene

Benzene is an organic chemical compound. It is an aromatic hydrocarbon composed of 6 carbon atoms in a ring, with 1 hydrogen atom attached to each carbon atom, with the molecular formula C6h5.Benzene is a natural constituent of crude oil, and is one of the most basic petrochemicals. It is a colorless and highly flammable liquid with a sweet smell.Benzene is an important precursor to basic industrial chemicals including drugs, plastics, synthetic rubber, and dyes. It is mainly used as an intermediate chemical to make downstream industrial chemicals to be further used in value chain for manufacturer of end use products. Its most widely-produced derivatives include-Styrene, used to make polymers, plastics and synthetic rubberPhenol (via cumene), for drugs, synthetic resins and adhesivesCyclohexane, used for Caprolactum in manufacture of NylonNitrobenzene for Aniline used for MDI (for polyurethane) and dyestuffsChlorobenzene, used for pesticides (DDT) , herbicides and solventsAlkyl Benzene, for LAB Sulphonate used for laundry detergents & industrial cleaners
View Complete Details

Polypropylene Copolymer

HPL manufactures 3, 41, 000 tonnes polypropylene per annum using Spheripol-II technology supplied by Basell, Netherlands. Spheripol process is the most widely accepted technology for manufacturing Homopolymers and Copolymer grades. The unique process capabilities and high consistency in product morphology ensure excellent quality.These products from HPL are of benchmark quality, meeting the highest international standards and are used extensively by packaging, consumer durables, houseware, furniture, container or luggage manufacturers in India and abroad. Due to superior quality, HPL products are in demand in various countries from EU, South East Asia, USA etc. HPL products are exported to several countries in the world.
View Complete Details

Solar Reflective Coating

All the materials used for construction of building absorb and transfer heat inside of the building all the day. Heat always flow from the warmer side to cooler side and cooler to warmer side. 80% to 95% of heat gain during summer and about 70% of heat loss during winter trasferred through the walls, ceiling and roofs of the building by way of conduction and radiation. The conventional insulation only slows down the rate of heat transfer which after saturation cannot stop radiant heat.
View Complete Details

Polybutadiene Rubber

Cyclopentane is a flammable alicyclic hydrocarbon with chemical formula C5H10.Cyclopentane is mainly used as Green blowing agent in Polyurethane foam used for thermal insulation in refrigerators, freezers, water heaters, insulated pipes & roofs, construction panels, etc. Cyclopentane is also used in the manufacture of resin, adhesives, pharma intermediate and as a gasoline additive as octane booster.Cyclopentane being halogen free compound is environment friendly with Zero-Ozone Depletion Potential and thus is fast replacing Chloro Fluoro Carbon (CFC ) applications in refrigeration and thermal insulation.
View Complete Details

Hh Bags

hese products from HPL are of benchmark quality, meeting the highest international standards and are used extensively by packaging, consumer durables, houseware, automobiles, furniture, container or luggage manufacturers in India and abroad. Due to superior quality, HPL products are in demand in various countries from EU, South East Asia, USA etc. HPL products are exported to more than 20 countries in the world.
View Complete Details

Polypropylene Homopolymer

HPL manufactures 3, 41, 000 tonnes polypropylene per annum using Spheripol-II technology supplied by Basell, Netherlands. Spheripol process is the most widely accepted technology for manufacturing Homopolymers and Copolymer grades. The unique process capabilities and high consistency in product morphology ensure excellent quality.These products from HPL are of benchmark quality, meeting the highest international standards and are used extensively by packaging, consumer durables, houseware, furniture, container or luggage manufacturers in India and abroad. Due to superior quality, HPL products are in demand in various countries from EU, South East Asia, USA etc. HPL products are exported to several countries in the world.Major Brands, Grades End Uses
View Complete Details

Octane Booster

Benzene is an organic chemical compound. It is an aromatic hydrocarbon composed of 6 carbon atoms in a ring, with 1 hydrogen atom attached to each carbon atom, with the molecular formula C6h5.Benzene is a natural constituent of crude oil, and is one of the most basic petrochemicals. It is a colorless and highly flammable liquid with a sweet smell.Benzene is an important precursor to basic industrial chemicals including drugs, plastics, synthetic rubber, and dyes. It is mainly used as an intermediate chemical to make downstream industrial chemicals to be further used in value chain for manufacturer of end use products. Its most widely-produced derivatives include-Styrene, used to make polymers, plastics and synthetic rubberPhenol (via cumene), for drugs, synthetic resins and adhesivesCyclohexane, used for Caprolactum in manufacture of NylonNitrobenzene for Aniline used for MDI (for polyurethane) and dyestuffsChlorobenzene, used for pesticides (DDT) , herbicides and solventsAlkyl Benzene, for LAB Sulphonate used for laundry detergents & industrial cleaners
View Complete Details

PPp Raffia Granules

HPL manufactures 3, 41, 000 tonnes polypropylene per annum using Spheripol-II technology supplied by Basell, Netherlands. Spheripol process is the most widely accepted technology for manufacturing Homopolymers and Copolymer grades. The unique process capabilities and high consistency in product morphology ensure excellent quality.These products from HPL are of benchmark quality, meeting the highest international standards and are used extensively by packaging, consumer durables, houseware, furniture, container or luggage manufacturers in India and abroad. Due to superior quality, HPL products are in demand in various countries from EU, South East Asia, USA etc. HPL products are exported to several countries in the world.Major Brands, Grades End Uses
View Complete Details

Soft Luggage

HPL manufactures 3, 41, 000 tonnes polypropylene per annum using Spheripol-II technology supplied by Basell, Netherlands. Spheripol process is the most widely accepted technology for manufacturing Homopolymers and Copolymer grades. The unique process capabilities and high consistency in product morphology ensure excellent quality.These products from HPL are of benchmark quality, meeting the highest international standards and are used extensively by packaging, consumer durables, houseware, furniture, container or luggage manufacturers in India and abroad. Due to superior quality, HPL products are in demand in various countries from EU, South East Asia, USA etc. HPL products are exported to several countries in the world.Major Brands, Grades End Uses
View Complete Details

Gasoline

Raw Pyrolysis Gasoline (RPG) is an aromatics-rich naphtha-range stream produced in sizeable quantities by an ethylene plant when it cracks naphtha, butane or gasoil. Raw Pygas resembles reformate. It can serve as a high-octane blendstock for motor gasoline or as a feedstock for an aromatics extraction unit.Hydrogenated Pyrolysis Gasoline (HPG) obtained from RPG post Benzene extraction and is used as chemical feedstock for Aromatics Toluene, mix-Xylene and low & heavy grade Fuel Oil. It is also used as gasoline blending component.
View Complete Details

Titanium Putty

Multi-Purpose Reclamation Putty for high temperature resistance till 230C A two component paste, engineering grade system based on a ferro-silicon filled epoxy system on high temperature resistance special resin. The non-rusting putty extensively used for repairing and rebuilding worn-out surfaces in machinery & equipment and precision critical applications in less down-time for high temperature service conditions. The high temperature putty requires post-curing for proper performance and temperature resistance. To achieve permanent temperature resistance do POST CURINGTEMPER HARDENING:High temperatures putty under ambient temperature conditions will take some time to cure to its ultimate properties. Post curing in an oven or by using heat lamps, to a maximum temperature of 150C for 2 hours, will result in rapid achievement of full cure properties. In-situ cure at the normal process operating temperatures will provide cured properties and an ultimate cure rate consistent with the process temperature.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Haldia Petrochemicals Limited (Haldia Petrochemicals Limited)
  • Tower 1, Bengal Eco Intelligent Park (Techna) Block EM, Plot No 3, Sector V, Salt Lake PO: Bidhan Nagar, District: North 24 Paraganas Kolkata 700091, West Bengal
  • Share us via