Our Products
Separating Machines
2 Products availableAir Compressors, Accessories & Parts
1 Products availableHeat Exchangers
1 Products availableAir Receivers
1 Products availableFilters
1 Products availableIndustrial Valves
1 Products available
| Aftercooler, Intercoolers, Oil Coolers, Condensers And Chillers | |||||||||
| Water Cooled After Cooler | |||||||||
|
| Features | |
| Stores the Pressurized Compressed Air | |
| Helps to maintain constant Pressure at downstream | |
| Cools the compressed air | |
| Helps to separate oil & moisture from compressed air | |
| To allow com pressured have optimum level of rest | |
| Hand and man holes Provided as per standards | |
| Range | |
| Range from 0.10 to 10m3 | |
| Vertical and Horizontal type | |
| As per standards of national and international pressure vessels code | |
Sanpar brings to you the state of the art compressed air filters. These filters are aptly designed to take care of the problems related with the dust and oil contaminants. The elements are assembled in a compact Aluminum Die cast housing. Sanpar Manufacturers Five Grades Of Filters. 1. Primary Pre filter PPF (Pleated SS mesh) : 25-micron filtration capacity. 2. Pre Filter PF (Pleated Cellulose Acetate) : Bulk liquid and partial removal down to 3 micron. 3. After Filter AF (Borosilicate glass fiber) : Liquid and partial removal down to 0.1 micron, residual oil content 0.5 mg/m3. 4. Final Filter FF (Borosilicate glass fiber : Liquid and partial removal down to 0.01 micron, residual oil content 0.01 mg/m3. 5. Carbon Filter CF (Activated Carbon Granules) : Liquid and partial removal below 0.01 micron, residual oil content 0.005 mg/m3. Free of odour and oil vapour.
| The actual pressure drop across After cooler is always high i.e. 0.5 kg/cm2 which means compressor has to compress 0.5 kg/cm2 more to deliver required pressure. This causes increase in Shaft Horse power by 3%. We design customised after coolers for your compressor so that pressure drop is less than 0.1 kg/cm2. This stright way gives saving of 3% and simple pay back on your investment is less than one year. The Moisture separators supplied by compressor manufacturers are low cost baffle type design. These are ineffective and causes more pressure drops. Moisture gets carried over to Air Dryer or to the plant.
| ||
SALIENT FEATURES OF SANPAR MOISTURE SEPARATOR Very high Efficiency ( more than 99%)Non-corrosive Aluminum die cast bodyCompact DesignMaintenance FreeLong lifeManual drain and auto drain facility
NO AIR LOSS FLOAT TYPE AUTO DRAIN The SFD320 is an automatic mechanical float type drain made of cast Aluminum bodyThat contains a stainless steel float ballIt discharges only the condensate automatically (not the compressed air).It is also equipped with a manual drain valve for manual operation.The drain is provided with a standard BSP connection. DRAINS SANPAR TIMER DRAIN Sanpar make Timer Drain consists of a strainer with a solenoid valve. The drain valve opens based on the timings set in the drain. Also the time interval between the successive openings of the valve can be set. The drain has a standard BSP connections.
Hadapsar, Pune, Maharashtra 