Transformer Tester in Gurugram

• Indications : Audible and visual
• Operating Temperature : -25°C to 55°C (-13°F to 131°F)
• Approvals : IEC-TC78
• Probe : Hook type probe and pin type probe
• Power supply : Battery operated, PP3 9V
• Supported Transformers : Up to 167 KVA single or three phase

The DOC-2000™ is intended for de-energised distribution transformer testing. It can determine the presence of short circuits or an open circuit in the distribution transformer primary winding and also short circuits on the secondary winding. The DOC-2000™ is designed to be operated from an arial d more...

• Resolution : 0.1KV
• Accuracy : ±2%
• Tripping Current : <4mS
• Gap Gauge : 2.5 mm and 2.0 mm
• Input Supply : 230±10% Volts AC, 50 Hz, single phase.
• Tripping Time after Breakdown : <6mS

OTS series insulating oil testers are fully automatic micro controller based system, completely self-contained, compact and portable giving smooth variable test voltage from 0 to 60, 80 or 100 kV for testing the dielectric strength of insulating oil in accordance with all international standards like IEC156IS more...

• Memory Stick : 100 MB+
• Weight : 24.9kg
• Model : CTTx2 & CTTx5
• Certification : ANSI 10/50IEC 60044, IEEE 30, IEEE 45
• Diamensions : 46.8 cm x 35.5 cm x 19.3 cm

Current transformer testing is an important part of the commissioning and maintenance of power systems. Protective relays can only operate adequately, under normal & fault conditions, if they receive the correct secondary current from the current transformaers. Therefore accurate CT testing to evaluate th more...

• Weight : Ten Kg
• Relative humidity : ≤80%rh, no condensing
• Power supply : 220 v AC±10%, 50hz
• Operating Temperature : -20~40
• Resistance measuring range : 0-400m( 50 A) , 1m (20 A, 2m(10 A) , 20 m(1A)
• Test currents : 15 m A /1 A/10A/20A/50 A

Our organization is a budding Exporter and Supplier of Transformer Winding Resistance Tester based in Maharashtra. Designed for large power transformers and medium power transformers with on load tap changers, the Transformer Winding Resistance Tester is known for its high efficiency, accurate reading, reliab more...

• Frequency : 45Hz, 66Hz
• Power Source : Electric
• Application : Industrial Use
• Operating Current : Double Phase, Single Phase, Triple Phase
• Automation Grade : Fully Automatic
• Feature : Easy To Use, Proper Working, Superior Finish
• Temperature Capacity : High Temperature, Low Temperature, Medium Temperature

Transformer Insulation Resistance Tester that we offer has an absorption ratio (IR 60 Sec/ IR 15 sec) and polarization index (IR 600 sec/ IR 60 sec), which are calculated and saved automatically. Transformer Insulation Resistance Tester features digital alphanumeric Display and its resistance range is up to 1 more...

• Tensile Strength : 0-25Mpa, 100-125Mpa
• Application : Industrial Use
• Frequency : 0-50Hz, 100-200Hz
• Automation Grade : Fully Automatic
• Feature : Durable, Robust Construction, Rust Proof
• Type : Potential Transformers

Our company is offering Potential Transformer Test Set for accounting stations. Potential Transformer Test Set is meant for on-site checking of single-phase instrument-class voltage transformers (VTs) of 0.2 accuracy class (or less accurate) and 50-Hz frequency rated at 6 to 330/3kV under a load (applied to a more...

OTS series insulating oil testers are fully automatic micro controller based system, completely self-contained, compact and portable giving smooth variable test voltage from 0 to 60, 80 or 100 kV for testing the dielectric strength of insulating oil in accordance with all international standards like IEC156/I more...

The CTTx2 & CTTx5 are rugged and easy to use current transformer testers, that offer Automatic and Manual testing modes. These instruments are designed to deliver fast and reliable measurements. Various parameters of the CT like CT Saturation/Excitation, Knee Point (as per ANSI 10/50IEC 60044, IEEE 30, IEEE 4 more...

The ART-3D series of Automatic Ratio Testers are precision instruments, designed to measure the turn ratios, phase displacements, excitation currents of single phase and three phase power, distribution and instrument transformers in conformity to the IEEE C57.12.90 & IEC 60076. Now featuring an enhanced test more...