Post Buy Requirement

Our Products

We are leaders in the market for providing best range of Foam Mixer, Material Hopper, Material Hopper with Vibrating Motor, Foam Concrete Mixer and Cholesteric Liquid Crystals Plant

Wire Cutting Machine

Specifications:
  • Max cutting capacity: up to 10m3/hr (only cutting time, not incl the time for transport of molds).
  • Electric power: 380-400V/ 50Hz/3 phases (other electric power resourses are available on request)
  • Very special electric geared motor for driving the cutting frame: capacity 0, 35 kW
  • Geared motors to drive the cutting wires capacity of 1.1kW and 1, 5 kW
  • Cutting frame guiding tubes: 4 very strong high quality alloy steel, chrome plated, with strong bushing and seals, life time guaranted
  • Control board: mounted on the side of the machine, with all control and operation buttons, emergency safety stop button, … for controlling all the cutting operation speed of of cutting wires frame. Electric alarm, lighting switch, etc.
  • All electrical & electronic components are from famous brand suppliers like Omron, LG, Schneider, to allow the operator to control the cutting process very easy at convenience
  • Cutting mode: automatic / semi-auto/ manual
  • Size of the mass concrete block before cutting: approx. 1220x1210x 400/500/600mm (height of brick depends on the buyer- options)
  • Size of the bricks: nominal standard sizes 10x20x(40/50/ 60cm), tolerance max 2mm. Other sizes available on request (for ex 7.5 /15 x 20 x 60cm)
View Complete Details

Clc Wire Cutting Machine

  • sizes 10x20x(40/50/ 60cm)
Max cutting capacity: up to 10m3hr (only cutting time, not incl the time for transport of molds).Electric power: 380-400V 50Hz3 phases (other electric power resourses are available on request)Very special electric geared motor for driving the cutting frame: capacity 0, 35 kWCutting frame guiding tubes: 4 very strong high quality alloy steel, chrome plated, with strong bushing and seals, life time guarantedControl board: mounted on the side of the machine, with all control and operation buttons, emergency safety stop button, for controlling all the cutting operation speed of of cutting wires frame. Electric alarm, lighting switch, etc.
View Complete Details

Autoclaved Aerated Concrete Plant

We are offering european non autoclaved aerated concrete plant (naac). This set of equipment is designed to produce the aerated concrete blocks. The mixer for aerated concrete is placed fixedly, the moulds transfer from pouring point to cutting point. Loading and dosing of components are carried out automatically - the materials through belt and screw conveyors are fed to intermediate hoppers suspended on the tensiometers. Dosing control terminal in case of reaching required weight turns off the conveyors. Components are poured into the mixer manually by opening of the bolt. Cutting of an array is carried out with the automatic cutting installation. Movement of the moulds on the rail track is organized through automatic push devices.
View Complete Details

Trolley

  • Thickness 1.6mm
  • Specification Material Trolley
  • Transport Trolley Capacity
  • 0.5m3 1m3
  • 1.6mm Weight
  • 70 to 75 kg 72 to 80kg
View Complete Details

Clc Mould

  • Mould Size 6ft x 2ft
Mould Size: 6ft x 2ft, Weight: 80kg approx, Thickness of Mould: 3mm. CLC blocks is your answer. CLC blocks are a cement. Stable, pre-formed foam manufactured on site is injected into this slurry to form foam concrete. Fresh foam concrete looks like a milk-shake and the volume of slurry in the foam dictates the cast density of the foam concrete.
View Complete Details

Foam Mixer

We are offering foam mixer. foam concrete mixers are uniquely designed to mix foam through the concrete in an even manner without destroying the foam for accurate density and continuous production. Foam concrete mixers comes with inbuilt water discharging system and digital weighing scale system . The mixer body is built up with high gauge steel and the shaft and other parts is made from alloy steel to bare high impacts and loads.
View Complete Details

Material Hopper

One of the leading manufacturers of aac plant & alc plant in india. Serving their clients with its perfection, efficiency and quality of work. Company manufactures these state of the art machineries, used in producing aac and alc blocks. Helps their clients, in setting up this plant at their places. Company plant, located in the wada area of thane district. This is fifty cubic meter operational plant for customer demonstration. Customer person can get trained in live production at our plant before landing of the equipment at customer premises.
View Complete Details

Material Hopper With Vibrating Motor

One of the leading manufacturers of aac plant & alc plant in india. Serving their clients with its perfection, efficiency and quality of work. Company manufactures these state of the art machineries, used in producing aac and alc blocks. Helps their clients, in setting up this plant at their places. Company plant, located in the wada area of thane district. This is fifty cubic meter operational plant for customer demonstration. Customer person can get trained in live production at our plant before landing of the equipment at customer premises.
View Complete Details

Automatic Fly Ash Bricks Making Machine

  • ELECTRICAL 21 H.P. III PHASE CONNECTIONS
  • PRODUCTION STANDARD BRICK 9, 000 TO 10, 000 / IN 8 HOURS
  • PER HOUR 1440 Bricks/Blocks
Hydraulic Brick Press (70 TON), Auto Press Feeding System, Press Feeder Bin, Hydraulic Power pack system, PLC based Control Panel, Heavy Duty Pan Mixer No.2, Belt Conveyor System, Brick Mould standard No.1 (8 cavity), Oil tank capacity 300 liter.
View Complete Details

Ball Mill

One of the leading manufacturers of aac plant & alc plant in india. Serving their clients with its perfection, efficiency and quality of work. Company manufactures these state of the art machineries, used in producing aac and alc blocks. Helps their clients, in setting up this plant at their places. Company plant, located in the wada area of thane district. This is fifty cubic meter operational plant for customer demonstration. Customer person can get trained in live production at our plant before landing of the equipment at customer premises.
View Complete Details

Manual Fly Ash Bricks Machine

  • ELECTRICAL 21 H.P. III PHASE CONNECTIONS
  • PRODUCTION STANDARD BRICK 9, 000 TO 10, 000 / IN 8 HOURS
  • PER HOUR 1440 Bricks/Blocks
Maximum High Pressure Tonnage: 40, Power Required : 16 HP (Main Press: 7.5 HP, Pan Mixer 1 Nos. 7.5 HP, conveyor 1 HP), Manufacturing Capacity : Fly Ash Bricks 6 to 8 pieces (in one operation), Facility : Fly ash bricks making machine single feeder facility for production of fly ash bricks Tank Capacity: 200 Liters., Bricks Size: 9" 4" '", - 6000 pieces (One shift) 8 cavity, Bricks Size: 9" 6" 3", - 5000 pieces (One shift) 6 cavity, Labors: Unskilled labor 7 & skilled labor 1, Brick Mould standard No.1 (8 cavity), Oil tank capacity 300 liter.
View Complete Details

Foam Concrete Mixer

The mixers are uniquely designed to mix foam through concrete in an even manner without destroying the foam. It has inbuilt water discharging system and digital weighing scale.
Features :

  • High output per shift (25)
  • Precise mixture
  • Variable Foam concrete density 400-1800kg/m3
  • Specially designed shaft blades system
  • Reverse and forward mixing
  • Inbuilt digital weighing scale
  • Corrosion resistant
  • High quality bearings
  • High gauge steel body
  • Alloy shaft
  • Impact resistant couplings
  • Inbuilt water discharge system
  • Easy maintenance and operation
View Complete Details

Foaming Agent

Foaming agent is normally used with 2-3% concentration in water. It has 2-years shelf-life when properly stored in the original containers at temperature between 0-50 C. Containers should not be exposed to heat or sunlight for a longer duration. It is environmentally safe and less toxic to aquatic life.

View Complete Details

Conveyor Belt

We are offering conveyor belt with hopper, specification cement fly ashsize 22 ft x 1.5 ft 22 ft x 2 ftmotor 2 hp 2 hphopper size 3 x 3 x 3 ft 5 x 5 x 5 ft.
View Complete Details

Mould

Specification:
  • Mould Size: 6ft x 2ft
  • Weight: 80kg approx
  • Thickness of Mould: 3mm
View Complete Details

Steam Curing Machine

Coil Type Hot water Generator:
    • Capacity: 500 Ltr
    • Max. Temp.: 900C
    • Width: 1200mm
    • Hight: 2.5mtr
    • Jacketed Fire box: 1200mm dai
    • Wood consumption: 100 kg/ Hr.
Coil Type Hot water Generator:
  • Capacity: 1000 Ltr
  • Max. Temp.: 900C
  • Width: 1400mm
  • Hight: 3.8mtr
  • Jacketed Fire box: 1400mm dai
  • Wood consumption: 200 kg/ Hr.
View Complete Details

Foam Concrete Pumps

Advantages :
  • No Seal
  • No valve
  • Self Priming
  • Can Run Dry without Damage
  • Time Saving, Fuel Saving
  • Energy Saving, Minimum Shear
  • No Noise
  • No leakage
  • No Mechanical Seal, No Maintenance
View Complete Details

Screw Conveyor

  • Loading Capacity 25 TPH
  • Specification Cement
  • Fly Ash Size
  • 168mm. DIA X 5 Mtrs 168mm. DIA X 5Mtrs
View Complete Details

Conveyor Belt With Hopper

  • Specification Cement
  • Fly Ash Size
  • 22 ft x 1.5 ft 22 ft x 2 ft
  • Motor 2 HP
  • 2 HP Hopper size
  • 3 x 3 x 3 ft 5 x 5 x 5 ft
We are leading supplier of this product.
View Complete Details

Electrical Panel

Features :
  • It having Push Button For ON/OFF motor , Conveyor
  • Weight Display STD Only Weight Display
  • Inbuilt Motor Starter
  • Over Load Protection
  • Mains Voltage Measuring Meter and Indication
View Complete Details

Air Compressor

We are offering air compressor. Clc is called as cellular light weight concrete and it is also called as foam concrete. Cellular light weight concrete (clc) is a version of light weight concrete that is produced like normal concrete under ambient conditions.
View Complete Details

Foam Generator

Foam generator makes foam for CLC using foaming agents. Foam generators come with corrosion resistant coated steel body, timer, air compressor, and lance units.
Features :

  • Adjustable density of foam
  • Automatic time setting to off the motor
  • Digital foam generator
  • Easy & cost effective maintenance and operation
  • Daily take 100 cubic meters with our foam generator
  • 1 HP single phase motor
  • Inbuilt control panel
  • Less power consumption
  • Corrosion resistant
  • Foam generator with lance unit
  • Adaptable to different kind of foaming agents
View Complete Details

Clc Steam Curing Plant

  • Production capacity 2500 blocks/day (30 m3)
  • Land requirement 4000 sqft shed / 8000 sqft open area
Fully Automatic CLC Plant is highly appreciated for its rugged construction, better performance, low maintenance, noise free operations and corrosion resistance. These plants are generally suitable for higher production capacity. The advantages with these plants are less production cost, less lab our, better finish & curing.
View Complete Details

Cholesteric Liquid Crystals Plant

We are offering cholesteric liquid crystals plant(clc plant)we are provide light weight block manufacturing plant.clc blocks are excellent for thermal and sound insulation which keeps the house cool in summer and warm in winter saving energy/ electricity for cooling and heating.
View Complete Details

Fully Automatic Hydraulic Press For Paver Blocks Complete With Electricals & Panel Board

  • Production capacity 2700 - 3000 blocks/Hour
  • Land requirement 3000 sqft shed / 3000sqft open area
  • Electricity consumption 21 H P/3 phase
  • Man Power 2 to 3 nos
10 H. P. Motor.Both layer Auto feed.Vibrator to Hopper.Auto press & Ejection.Cycle time 8 to 9 seconds.Hammering while pressing.Oil tank capacity 300 lts.Option of using single trolly.Holding while pressing.Safety Sensor Guard.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

List of Other Products by GUBBI Enterprises from Thane, Maharashtra.
Post Buy Requirement

Our Products

We are leaders in the market for providing best range of Foam Mixer, Material Hopper, Material Hopper with Vibrating Motor, Foam Concrete Mixer and Cholesteric Liquid Crystals Plant

Wire Cutting Machine

Specifications:
  • Max cutting capacity: up to 10m3/hr (only cutting time, not incl the time for transport of molds).
  • Electric power: 380-400V/ 50Hz/3 phases (other electric power resourses are available on request)
  • Very special electric geared motor for driving the cutting frame: capacity 0, 35 kW
  • Geared motors to drive the cutting wires capacity of 1.1kW and 1, 5 kW
  • Cutting frame guiding tubes: 4 very strong high quality alloy steel, chrome plated, with strong bushing and seals, life time guaranted
  • Control board: mounted on the side of the machine, with all control and operation buttons, emergency safety stop button, … for controlling all the cutting operation speed of of cutting wires frame. Electric alarm, lighting switch, etc.
  • All electrical & electronic components are from famous brand suppliers like Omron, LG, Schneider, to allow the operator to control the cutting process very easy at convenience
  • Cutting mode: automatic / semi-auto/ manual
  • Size of the mass concrete block before cutting: approx. 1220x1210x 400/500/600mm (height of brick depends on the buyer- options)
  • Size of the bricks: nominal standard sizes 10x20x(40/50/ 60cm), tolerance max 2mm. Other sizes available on request (for ex 7.5 /15 x 20 x 60cm)
View Complete Details

Clc Wire Cutting Machine

  • sizes 10x20x(40/50/ 60cm)
Max cutting capacity: up to 10m3hr (only cutting time, not incl the time for transport of molds).Electric power: 380-400V 50Hz3 phases (other electric power resourses are available on request)Very special electric geared motor for driving the cutting frame: capacity 0, 35 kWCutting frame guiding tubes: 4 very strong high quality alloy steel, chrome plated, with strong bushing and seals, life time guarantedControl board: mounted on the side of the machine, with all control and operation buttons, emergency safety stop button, for controlling all the cutting operation speed of of cutting wires frame. Electric alarm, lighting switch, etc.
View Complete Details

Autoclaved Aerated Concrete Plant

We are offering european non autoclaved aerated concrete plant (naac). This set of equipment is designed to produce the aerated concrete blocks. The mixer for aerated concrete is placed fixedly, the moulds transfer from pouring point to cutting point. Loading and dosing of components are carried out automatically - the materials through belt and screw conveyors are fed to intermediate hoppers suspended on the tensiometers. Dosing control terminal in case of reaching required weight turns off the conveyors. Components are poured into the mixer manually by opening of the bolt. Cutting of an array is carried out with the automatic cutting installation. Movement of the moulds on the rail track is organized through automatic push devices.
View Complete Details

Trolley

  • Thickness 1.6mm
  • Specification Material Trolley
  • Transport Trolley Capacity
  • 0.5m3 1m3
  • 1.6mm Weight
  • 70 to 75 kg 72 to 80kg
View Complete Details

Clc Mould

  • Mould Size 6ft x 2ft
Mould Size: 6ft x 2ft, Weight: 80kg approx, Thickness of Mould: 3mm. CLC blocks is your answer. CLC blocks are a cement. Stable, pre-formed foam manufactured on site is injected into this slurry to form foam concrete. Fresh foam concrete looks like a milk-shake and the volume of slurry in the foam dictates the cast density of the foam concrete.
View Complete Details

Foam Mixer

We are offering foam mixer. foam concrete mixers are uniquely designed to mix foam through the concrete in an even manner without destroying the foam for accurate density and continuous production. Foam concrete mixers comes with inbuilt water discharging system and digital weighing scale system . The mixer body is built up with high gauge steel and the shaft and other parts is made from alloy steel to bare high impacts and loads.
View Complete Details

Material Hopper

One of the leading manufacturers of aac plant & alc plant in india. Serving their clients with its perfection, efficiency and quality of work. Company manufactures these state of the art machineries, used in producing aac and alc blocks. Helps their clients, in setting up this plant at their places. Company plant, located in the wada area of thane district. This is fifty cubic meter operational plant for customer demonstration. Customer person can get trained in live production at our plant before landing of the equipment at customer premises.
View Complete Details

Material Hopper With Vibrating Motor

One of the leading manufacturers of aac plant & alc plant in india. Serving their clients with its perfection, efficiency and quality of work. Company manufactures these state of the art machineries, used in producing aac and alc blocks. Helps their clients, in setting up this plant at their places. Company plant, located in the wada area of thane district. This is fifty cubic meter operational plant for customer demonstration. Customer person can get trained in live production at our plant before landing of the equipment at customer premises.
View Complete Details

Automatic Fly Ash Bricks Making Machine

  • ELECTRICAL 21 H.P. III PHASE CONNECTIONS
  • PRODUCTION STANDARD BRICK 9, 000 TO 10, 000 / IN 8 HOURS
  • PER HOUR 1440 Bricks/Blocks
Hydraulic Brick Press (70 TON), Auto Press Feeding System, Press Feeder Bin, Hydraulic Power pack system, PLC based Control Panel, Heavy Duty Pan Mixer No.2, Belt Conveyor System, Brick Mould standard No.1 (8 cavity), Oil tank capacity 300 liter.
View Complete Details

Ball Mill

One of the leading manufacturers of aac plant & alc plant in india. Serving their clients with its perfection, efficiency and quality of work. Company manufactures these state of the art machineries, used in producing aac and alc blocks. Helps their clients, in setting up this plant at their places. Company plant, located in the wada area of thane district. This is fifty cubic meter operational plant for customer demonstration. Customer person can get trained in live production at our plant before landing of the equipment at customer premises.
View Complete Details

Manual Fly Ash Bricks Machine

  • ELECTRICAL 21 H.P. III PHASE CONNECTIONS
  • PRODUCTION STANDARD BRICK 9, 000 TO 10, 000 / IN 8 HOURS
  • PER HOUR 1440 Bricks/Blocks
Maximum High Pressure Tonnage: 40, Power Required : 16 HP (Main Press: 7.5 HP, Pan Mixer 1 Nos. 7.5 HP, conveyor 1 HP), Manufacturing Capacity : Fly Ash Bricks 6 to 8 pieces (in one operation), Facility : Fly ash bricks making machine single feeder facility for production of fly ash bricks Tank Capacity: 200 Liters., Bricks Size: 9" 4" '", - 6000 pieces (One shift) 8 cavity, Bricks Size: 9" 6" 3", - 5000 pieces (One shift) 6 cavity, Labors: Unskilled labor 7 & skilled labor 1, Brick Mould standard No.1 (8 cavity), Oil tank capacity 300 liter.
View Complete Details

Foam Concrete Mixer

The mixers are uniquely designed to mix foam through concrete in an even manner without destroying the foam. It has inbuilt water discharging system and digital weighing scale.
Features :

  • High output per shift (25)
  • Precise mixture
  • Variable Foam concrete density 400-1800kg/m3
  • Specially designed shaft blades system
  • Reverse and forward mixing
  • Inbuilt digital weighing scale
  • Corrosion resistant
  • High quality bearings
  • High gauge steel body
  • Alloy shaft
  • Impact resistant couplings
  • Inbuilt water discharge system
  • Easy maintenance and operation
View Complete Details

Foaming Agent

Foaming agent is normally used with 2-3% concentration in water. It has 2-years shelf-life when properly stored in the original containers at temperature between 0-50 C. Containers should not be exposed to heat or sunlight for a longer duration. It is environmentally safe and less toxic to aquatic life.

View Complete Details

Conveyor Belt

We are offering conveyor belt with hopper, specification cement fly ashsize 22 ft x 1.5 ft 22 ft x 2 ftmotor 2 hp 2 hphopper size 3 x 3 x 3 ft 5 x 5 x 5 ft.
View Complete Details

Mould

Specification:
  • Mould Size: 6ft x 2ft
  • Weight: 80kg approx
  • Thickness of Mould: 3mm
View Complete Details

Steam Curing Machine

Coil Type Hot water Generator:
    • Capacity: 500 Ltr
    • Max. Temp.: 900C
    • Width: 1200mm
    • Hight: 2.5mtr
    • Jacketed Fire box: 1200mm dai
    • Wood consumption: 100 kg/ Hr.
Coil Type Hot water Generator:
  • Capacity: 1000 Ltr
  • Max. Temp.: 900C
  • Width: 1400mm
  • Hight: 3.8mtr
  • Jacketed Fire box: 1400mm dai
  • Wood consumption: 200 kg/ Hr.
View Complete Details

Foam Concrete Pumps

Advantages :
  • No Seal
  • No valve
  • Self Priming
  • Can Run Dry without Damage
  • Time Saving, Fuel Saving
  • Energy Saving, Minimum Shear
  • No Noise
  • No leakage
  • No Mechanical Seal, No Maintenance
View Complete Details

Screw Conveyor

  • Loading Capacity 25 TPH
  • Specification Cement
  • Fly Ash Size
  • 168mm. DIA X 5 Mtrs 168mm. DIA X 5Mtrs
View Complete Details

Conveyor Belt With Hopper

  • Specification Cement
  • Fly Ash Size
  • 22 ft x 1.5 ft 22 ft x 2 ft
  • Motor 2 HP
  • 2 HP Hopper size
  • 3 x 3 x 3 ft 5 x 5 x 5 ft
We are leading supplier of this product.
View Complete Details

Electrical Panel

Features :
  • It having Push Button For ON/OFF motor , Conveyor
  • Weight Display STD Only Weight Display
  • Inbuilt Motor Starter
  • Over Load Protection
  • Mains Voltage Measuring Meter and Indication
View Complete Details

Air Compressor

We are offering air compressor. Clc is called as cellular light weight concrete and it is also called as foam concrete. Cellular light weight concrete (clc) is a version of light weight concrete that is produced like normal concrete under ambient conditions.
View Complete Details

Foam Generator

Foam generator makes foam for CLC using foaming agents. Foam generators come with corrosion resistant coated steel body, timer, air compressor, and lance units.
Features :

  • Adjustable density of foam
  • Automatic time setting to off the motor
  • Digital foam generator
  • Easy & cost effective maintenance and operation
  • Daily take 100 cubic meters with our foam generator
  • 1 HP single phase motor
  • Inbuilt control panel
  • Less power consumption
  • Corrosion resistant
  • Foam generator with lance unit
  • Adaptable to different kind of foaming agents
View Complete Details

Clc Steam Curing Plant

  • Production capacity 2500 blocks/day (30 m3)
  • Land requirement 4000 sqft shed / 8000 sqft open area
Fully Automatic CLC Plant is highly appreciated for its rugged construction, better performance, low maintenance, noise free operations and corrosion resistance. These plants are generally suitable for higher production capacity. The advantages with these plants are less production cost, less lab our, better finish & curing.
View Complete Details

Cholesteric Liquid Crystals Plant

We are offering cholesteric liquid crystals plant(clc plant)we are provide light weight block manufacturing plant.clc blocks are excellent for thermal and sound insulation which keeps the house cool in summer and warm in winter saving energy/ electricity for cooling and heating.
View Complete Details

Fully Automatic Hydraulic Press For Paver Blocks Complete With Electricals & Panel Board

  • Production capacity 2700 - 3000 blocks/Hour
  • Land requirement 3000 sqft shed / 3000sqft open area
  • Electricity consumption 21 H P/3 phase
  • Man Power 2 to 3 nos
10 H. P. Motor.Both layer Auto feed.Vibrator to Hopper.Auto press & Ejection.Cycle time 8 to 9 seconds.Hammering while pressing.Oil tank capacity 300 lts.Option of using single trolly.Holding while pressing.Safety Sensor Guard.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us