Stabilization of voltage is a necessity because both high and low values of fluctuations can severely harm electrical equipment. We offer a range of Servo Voltage Stabilizers, which is manufactured using high-end technology and designed by experienced personnel. Our Servo Voltage Stabilizer consists of special Voltage Regulators in Vertical Rolling Contact, Linear Plus/Minus Type and easily solves many problems caused due to erratic voltages. Available in a varied range of models, our Servo Voltage Stabilizers are ideal for applications requiring 24hrs continuous running time.

Range : 30KVA to 3000KVA

Components

• Double Wound Buck/Boost Type Series Transformer
• Electronic Control Circuit and Meter Panel

Why Our Servo Voltage Stabilizer?

• Maintains constant voltage level
• Reduces electrical equipment breakdown
• Saves substantial power
• Aids in using existing transformer, cables etc. in a better way
• Maintains power factor and MDI in case of high voltage
• Increases quantity and improves production quality
• 80% depreciation as per income tax act

Application Areas

• Cement plants
• Flour mills
• Engineering units
• Pharmaceutical units
• Cold storages
• Multiplexes
• Textiles Mills, Paper Mills, Tube Mills,
• Call Centers

• Rubber Industries
• Tea Estates
• Oil and Vanaspati Plants
• Research Stations
• Distilleries
• Food and Beverages Plants
• Hospitals
• Clubs and Hotels

Our company shares glorious credentials among the prominent Manufacturers, Suppliers and Exporters of Automatic Voltage Controllers.  The Voltage Controllers we make available results in considerable power saving and better utilization of existing transformers and cables. We have all the in-house facilities to deliver bulk orders of the Controllers within the stipulated time.

Range : 6.3KVA to 4000KVA

Advantages :

• Reduction in Breakdown of Electrical equipment.

• Considerable Power saving possible.

• Better Utilization of Existing transformer, cables etc.

• Mainteance of power factor and MDI. If the voltage is normally high.

• increase in productivity and better efficiency in plant due to less production losses.

• 80% Depreciation as per income tax Act.

Benefits of Installing Automatic Voltage Controller on Lighting Load :

By maintaning 365-380/210-220 Volts, Three / Single Phase output through Automatic Voltage Controller for lighting load, there will be definite saving in power bill & reduction in failure rate of lighting equipments. Higher the input voltage more will be the savings. The overall effect on the brightness of the lamp at 210/220 volts will be negligible.

Applications:

Though Stabilizers are useful for any kind of application, these are most suitable for 24 hour continuous process plants where breakdowns due to fluctuations results in heavy financial losses. These include :

Cement Plants, Flour Mills, Engineering Units, Pharmaceutifcal units, Pharamaceutifcal units, cold storage, Multiplexes, Rolling Mills, Textile Mills, Paper Mills, Tube Mills, Rice Shellers, Call centers Rubber industries, tEa Estates, Food Processing Units., Oil & Vanaspati Plants, Footwear & Leather Units, Research Stations, Distilleries, Food & Beverages plants, Hospitals, Nursing Homes, clubs, Hotels, High Rise Buildings etc.

Comparison Between GTB Make and Conventional Make Automatic Voltage Controller - GTB Make Roller Type Regulator

• Power Consumption is 0.5 to 1.5% depending upon the model & Input voltage variation.

• Suitable for continuous 100% duty cycle.

• Life at full load is 15-20 years.

• Five years unconditional guarantee.

• Negligible losses in full boost & buck conditions.

Conventional make with Carbon Brush Regulator :

• Power Consumption is 2 to 7% depending upon the model & input voltage variation.l

• Suitable for only 30% to 40% duty cycle.

• Maximum life is 2-3 years at full load.

• Normal guarantee for one year.

• Max. Losses in full boost and buck condition.

Stabilization of voltage is a necessity because both high and low values of fluctuations can severely harm electrical equipment. We offer a range of Servo Voltage Stabilizers, which is manufactured using high-end technology and designed by experienced personnel. Our Servo Voltage Stabilizer consists of special Voltage Regulators in Vertical Rolling Contact, Linear Plus/Minus Type and easily solves many problems caused due to erratic voltages. Available in a varied range of models, our Servo Voltage Stabilizers are ideal for applications requiring 24hrs continuous running time.

Range : 30KVA to 3000KVA

Components

• Double Wound Buck/Boost Type Series Transformer
• Electronic Control Circuit and Meter Panel

Why Our Servo Voltage Stabilizer?

• Maintains constant voltage level
• Reduces electrical equipment breakdown
• Saves substantial power
• Aids in using existing transformer, cables etc. in a better way
• Maintains power factor and MDI in case of high voltage
• Increases quantity and improves production quality
• 80% depreciation as per income tax act

Application Areas

• Cement plants
• Flour mills
• Engineering units
• Pharmaceutical units
• Cold storages
• Multiplexes
• Textiles Mills, Paper Mills, Tube Mills,
• Call Centers

• Rubber Industries
• Tea Estates
• Oil and Vanaspati Plants
• Research Stations
• Distilleries
• Food and Beverages Plants
• Hospitals
• Clubs and Hotels

Our company shares glorious credentials among the prominent Manufacturers, Suppliers and Exporters of Automatic Voltage Controllers.  The Voltage Controllers we make available results in considerable power saving and better utilization of existing transformers and cables. We have all the in-house facilities to deliver bulk orders of the Controllers within the stipulated time.

Range : 6.3KVA to 4000KVA

Advantages :

• Reduction in Breakdown of Electrical equipment.

• Considerable Power saving possible.

• Better Utilization of Existing transformer, cables etc.

• Mainteance of power factor and MDI. If the voltage is normally high.

• increase in productivity and better efficiency in plant due to less production losses.

• 80% Depreciation as per income tax Act.

Benefits of Installing Automatic Voltage Controller on Lighting Load :

By maintaning 365-380/210-220 Volts, Three / Single Phase output through Automatic Voltage Controller for lighting load, there will be definite saving in power bill & reduction in failure rate of lighting equipments. Higher the input voltage more will be the savings. The overall effect on the brightness of the lamp at 210/220 volts will be negligible.

Applications:

Though Stabilizers are useful for any kind of application, these are most suitable for 24 hour continuous process plants where breakdowns due to fluctuations results in heavy financial losses. These include :

Cement Plants, Flour Mills, Engineering Units, Pharmaceutifcal units, Pharamaceutifcal units, cold storage, Multiplexes, Rolling Mills, Textile Mills, Paper Mills, Tube Mills, Rice Shellers, Call centers Rubber industries, tEa Estates, Food Processing Units., Oil & Vanaspati Plants, Footwear & Leather Units, Research Stations, Distilleries, Food & Beverages plants, Hospitals, Nursing Homes, clubs, Hotels, High Rise Buildings etc.

Comparison Between GTB Make and Conventional Make Automatic Voltage Controller - GTB Make Roller Type Regulator

• Power Consumption is 0.5 to 1.5% depending upon the model & Input voltage variation.

• Suitable for continuous 100% duty cycle.

• Life at full load is 15-20 years.

• Five years unconditional guarantee.

• Negligible losses in full boost & buck conditions.

Conventional make with Carbon Brush Regulator :

• Power Consumption is 2 to 7% depending upon the model & input voltage variation.l

• Suitable for only 30% to 40% duty cycle.

• Maximum life is 2-3 years at full load.

• Normal guarantee for one year.

• Max. Losses in full boost and buck condition.