Product / Services
Post Buy Requirement
GN
Greentek Northern India Pvt Ltd
Secunderabad, Telangana, India
Add Review
Call Now Call Now

Our Products

  1. Solar Water Heater Accessories 5 Products available
  2. Others 7 Products available

Solar Water Heater Accessories #5371716

flat plate collectors

Flat Plate Collectors
  •   FLAT PLATE COLLECTOR SPECIFICATION:
  • Typeof Collectors: flat plate
  • Collector Size:  
  • Collector box details: a) Size:2025mmx1025.mmx95mm
  •   b) Materials: Aluminium Section
  •   c) Thickness: 1.4mm
  •   d) Bottom sheet: 24 Swg
  • Manufacturer:  
  • Trade mark GREENTEK
  •   Insulation
  •   a. Material: Rockwool
  •   b. Thickness: 50.mm bottom/25.mm side
  •   c. Thermal Conductivity:0.681mw/cm.deg.c
  • Absorber details  
  •   a. Material: Copper
  •   b. Absorber area: 1.9sq.m
  •   c. Type of coating: Nalsun
  •   d. Solar
  •   Absorptivity: 96%
  •   Emissivity: 16%
  • Riser or Header Tube  
  •   b. Dia Header:25mm
  •   c. Dia Riser:12.5.mm
  •   d. No. of riser:9 Nos.
  •   e. Spacing of raiser: 110 mm
  •   f. Flange Material: Brass
  •   g. Flange Dia: 42mm
  •   h. Working pressure: 3kg/sqcm
  • Glazing :  
  •   a. Material:
  •   b. Thickness: 4.mm
  •   c. Solar transtivity:>83.%
  • Gromment: EPDM
  • Glass Beading: Rubber Beading
  • Hardware:  SS Screws
  • Fins: 9
  • Finish:  Powder Coated
  • Weight: 38 kg/pc(dry)
  •    
Flat Plate Collectors offer a reliable supply of solar hot water for residential and commercial applications where evacuated tubes may not be suitable

The Greentek flat plate solar thermal collector is suitable for residential or commercial solar water heating projects.

The collector features a low profile (75mm / 3" profile) design, which combined with ultra-lightweight melamine foam insulation, makes it one of the lightest flat plate panels per m2on the market.

The TINOX Energy Aluminium absorber sheet absorbs up to 95% of available sunlight converting into usable heat.

While the basic flat plate design has been around for a long time, and is the most widely used type of solar thermal panel for domestic hot water supply, not all collectors are designed and made alike. Choice of material and design aspects can greatly affect not only the solar thermal performance but also the reliability when operating in many varied environmental conditions. Greentek has chosen only the highest quality materials to ensure reliable, efficient operation and collector longevity.

Glass

Toughened glass (glazing) protects the absorber from the outside environment while allowing through >90% of sunlight.

Absorber

A thin sheet of Aluminium is coated with a highly selective material that is extremely efficient at absorbing sunlight and converting it into usable heat. The aluminium sheet is ultrasonically welded to the copper riser pipes.

Insulation

The insulation helps reduce heat loss from the sides and back of the collector. Made from ultra-light weight melamine foam this material is chosen to greatly reduce the weight of the collector.

Back Sheet

An aluminium alloy sheet seals the back of the panel and adds to the rigidity of the collector.

Riser & Header Pipe

The header and riser pipes are brazed together to form a harp shaped heat exchanger that the solar system heat transfer fluid circulates through. The absorber sheet is ultrasonically welded to the riser pipes, thus transfers heat to the heat transfer fluid.

Aluminium Rails

Extruded from high tensile 6063 aluminium alloy, the rails form the outer framework of the collector and are designed with wings for easy mounting frame attachment.
View Complete Details
Ask Latest Price & Details
Flat Plate Solar Collector

Flat Plate Solar Collector
Flat Plate Collectors offer a reliable supply of solar hot water for residential and commercial applications where evacuated tubes may not be suitable The Greentek flat plate solar thermal collector is suitable for residential or commercial solar water heating projects. The collector features a low profile (75mm 3" profile) design, which combined with ultra-lightweight melamine foam insulation, makes it one of the lightest flat plate panels per m2 on the market. The TINOX Energy Aluminium absorber sheet absorbs up to 95% of available sunlight converting into usable heat.
View Complete Details
Ask Latest Price & Details
Solar Tank

Solar Tank
The most common hot water system involves heating and then storing hot water in a tank. When hot water is used, it is drawn from the top of the tank, where the water is the hottest, and fresh cold water is delivered into the bottom of the tank. Because hotter water is lighter and sits above colder water, it is realistic to see a tank that has bottom half cold and the top half hot. this is referred to as thermal layering, or stratification. Eventually after enough hot water usage the water suddenly turns cold, which is something everybody has probably experienced!
View Complete Details
Ask Latest Price & Details
evacuated tube solar collector

Evacuated Tube Solar Collector
The Greentek flat plate solar thermal collector is suitable for residential or commercial solar water heating projects. The collector features a low profile (75mm 3" profile) design, which combined with ultra-lightweight melamine foam insulation, makes it one of the lightest flat plate panels per m2 on the market. The TINOX Energy Aluminium absorber sheet absorbs up to 95% of available sunlight converting into usable heat
View Complete Details
Ask Latest Price & Details
Solar Thermal Collector

Solar Thermal Collector
When light energy is absorbed by a material known as a semiconductor, an electrical charge is created, this property of the material is known as the photoelectric effect. Silicon is the most common semiconductor used by PV cell manufacturers.
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.
Retailer of Solar Water Heater Accessories from Secunderabad, Telangana by Greentek Northern India Pvt Ltd
Product / Services
Post Buy Requirement
GN

Greentek Northern India Pvt Ltd Secunderabad, Telangana

Secunderabad, Telangana, India
Add Review
Call Now Call Now

Our Products

  1. Solar Water Heater Accessories 5 Products available

  2. Solar Panel

    1 Products available

  3. Water Heaters

    1 Products available

  4. Water Tanks

    1 Products available

  5. Solar Water Heater

    1 Products available

  6. Heaters, Thermostats & Heating Devices

    1 Products available
  7. Others Products 2 Products available

Solar Water Heater Accessories #5371716

Our offered Product range includes flat plate collectors, Flat Plate Solar Collector, Solar Tank, evacuated tube solar collector and Solar Thermal Collector.

flat plate collectors

Flat Plate Collectors
  •   FLAT PLATE COLLECTOR SPECIFICATION:
  • Typeof Collectors: flat plate
  • Collector Size:  
  • Collector box details: a) Size:2025mmx1025.mmx95mm
  •   b) Materials: Aluminium Section
  •   c) Thickness: 1.4mm
  •   d) Bottom sheet: 24 Swg
  • Manufacturer:  
  • Trade mark GREENTEK
  •   Insulation
  •   a. Material: Rockwool
  •   b. Thickness: 50.mm bottom/25.mm side
  •   c. Thermal Conductivity:0.681mw/cm.deg.c
  • Absorber details  
  •   a. Material: Copper
  •   b. Absorber area: 1.9sq.m
  •   c. Type of coating: Nalsun
  •   d. Solar
  •   Absorptivity: 96%
  •   Emissivity: 16%
  • Riser or Header Tube  
  •   b. Dia Header:25mm
  •   c. Dia Riser:12.5.mm
  •   d. No. of riser:9 Nos.
  •   e. Spacing of raiser: 110 mm
  •   f. Flange Material: Brass
  •   g. Flange Dia: 42mm
  •   h. Working pressure: 3kg/sqcm
  • Glazing :  
  •   a. Material:
  •   b. Thickness: 4.mm
  •   c. Solar transtivity:>83.%
  • Gromment: EPDM
  • Glass Beading: Rubber Beading
  • Hardware:  SS Screws
  • Fins: 9
  • Finish:  Powder Coated
  • Weight: 38 kg/pc(dry)
  •    
Flat Plate Collectors offer a reliable supply of solar hot water for residential and commercial applications where evacuated tubes may not be suitable

The Greentek flat plate solar thermal collector is suitable for residential or commercial solar water heating projects.

The collector features a low profile (75mm / 3" profile) design, which combined with ultra-lightweight melamine foam insulation, makes it one of the lightest flat plate panels per m2on the market.

The TINOX Energy Aluminium absorber sheet absorbs up to 95% of available sunlight converting into usable heat.

While the basic flat plate design has been around for a long time, and is the most widely used type of solar thermal panel for domestic hot water supply, not all collectors are designed and made alike. Choice of material and design aspects can greatly affect not only the solar thermal performance but also the reliability when operating in many varied environmental conditions. Greentek has chosen only the highest quality materials to ensure reliable, efficient operation and collector longevity.

Glass

Toughened glass (glazing) protects the absorber from the outside environment while allowing through >90% of sunlight.

Absorber

A thin sheet of Aluminium is coated with a highly selective material that is extremely efficient at absorbing sunlight and converting it into usable heat. The aluminium sheet is ultrasonically welded to the copper riser pipes.

Insulation

The insulation helps reduce heat loss from the sides and back of the collector. Made from ultra-light weight melamine foam this material is chosen to greatly reduce the weight of the collector.

Back Sheet

An aluminium alloy sheet seals the back of the panel and adds to the rigidity of the collector.

Riser & Header Pipe

The header and riser pipes are brazed together to form a harp shaped heat exchanger that the solar system heat transfer fluid circulates through. The absorber sheet is ultrasonically welded to the riser pipes, thus transfers heat to the heat transfer fluid.

Aluminium Rails

Extruded from high tensile 6063 aluminium alloy, the rails form the outer framework of the collector and are designed with wings for easy mounting frame attachment.
View Complete Details
Ask Latest Price & Details
Flat Plate Solar Collector

Flat Plate Solar Collector
Flat Plate Collectors offer a reliable supply of solar hot water for residential and commercial applications where evacuated tubes may not be suitable The Greentek flat plate solar thermal collector is suitable for residential or commercial solar water heating projects. The collector features a low profile (75mm 3" profile) design, which combined with ultra-lightweight melamine foam insulation, makes it one of the lightest flat plate panels per m2 on the market. The TINOX Energy Aluminium absorber sheet absorbs up to 95% of available sunlight converting into usable heat.
View Complete Details
Ask Latest Price & Details
Solar Tank

Solar Tank
The most common hot water system involves heating and then storing hot water in a tank. When hot water is used, it is drawn from the top of the tank, where the water is the hottest, and fresh cold water is delivered into the bottom of the tank. Because hotter water is lighter and sits above colder water, it is realistic to see a tank that has bottom half cold and the top half hot. this is referred to as thermal layering, or stratification. Eventually after enough hot water usage the water suddenly turns cold, which is something everybody has probably experienced!
View Complete Details
Ask Latest Price & Details
evacuated tube solar collector

Evacuated Tube Solar Collector
The Greentek flat plate solar thermal collector is suitable for residential or commercial solar water heating projects. The collector features a low profile (75mm 3" profile) design, which combined with ultra-lightweight melamine foam insulation, makes it one of the lightest flat plate panels per m2 on the market. The TINOX Energy Aluminium absorber sheet absorbs up to 95% of available sunlight converting into usable heat
View Complete Details
Ask Latest Price & Details
Solar Thermal Collector

Solar Thermal Collector
When light energy is absorbed by a material known as a semiconductor, an electrical charge is created, this property of the material is known as the photoelectric effect. Silicon is the most common semiconductor used by PV cell manufacturers.
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.