Kleenmag Rare Earth magnetic filters use ultra high power RE Magnets and configured to exert maximum pulling power on ferrous particles circulating in liquids. The button shaped 11000 gauze RE magnets are assembled in thin walled SS-304/316 tubes and even the filter housing is of SS-304/316 grade. The unique design empowers the filter to capture maximum particles in motion and retain them for disposal. Each filter comes with a cleaning tool to remove the ferrous particles from the magnets outer tube. The result is cleaner fluids such as machine coolant, gear oil, hydraulic oil, quenching oil, lube oil and cutting oil.

Pollution norms are becoming stringent by the day and as a responsible service station operator you cannot afford to over look the problems of safe disposal of large amounts of wastewater generated in your facility. Well maintained car wash facilities typically use about 60-80 litres per vehicle without recycling wash water, and automatic systems with water recycling can use less than 28-40 litres. However, without water recycling or rigorous maintenance, automatic systems can easily use more than 280-300 litres per vehicle. KleenWASH offers a reliable solution to vehicle wash water recycling so that the water can either be safely discharged or reused saving money for you. KleenWASH separates oils, grease, sludge, bacteria and odor from the wash water through a well defined yet simple process.

KleenSEP oil-water separator is innovative and yet simple and economical. It is head and shoulders above the other gravity based separators offered by competition and has innovative features that are unmatched.

Technology : Oily water flows by gravity into the system or is pumped by a centrifugal pump using a self leveling floating suction device that pulls in large amounts of floating oil along with water. The oily water travels through the Oil-Water Separator where oil is separated by coalescing media. The oil rises to the top of the separator that can be drained out. Clean water that flows out of the separator will have less than 10PPM of oil and less than 25mg/ltr of TSS. Optional Micro fiber and Activated Carbon filters for polishing of output water also are provided.

Applications : Coolant tank tramp oil removal/Component washing solution cleaning/Compressor condensate water cleaning/Ship bilge water recycling/Rolling mill waste water.

Now, oil separation from water is no more a hassle.

Thermic fluid is subjected to high temperatures throughout its operating life. Owing to frequent overheating, it breaks into low boiling and high boiling components. While adequate venting or de-aeration will get rid of Low boiling compounds, high boiling compounds circulate in fluid as carbon sludge. These highly heat resistant carbon solids make the fluid viscous. If they are not removed regularly it could result into high fuel consumption, drop in thermal transfer efficiency and higher pumping cost. Kleenpro Thermic Fluid Filtration Systems offer unmatched filtration performance resulting in better thermal transfer efficiency, increased life of fluid, reduced power consumption due to faster heating and pumping, reduced system maintenance and improved final products. Large sized depth filter elements made of SS and GF process large quantities of hot fluids at upto 400 deg C(750 deg F) and remove particles down to 5 microns. Both On-line and Off-line models are available.

Kleenpro is a Mobile sump cleaner cum coolant filtration system.

Technology :

• It works on the basis of stage wise removal of solid particles of different sizes from cutting oil down to 25microns.
• It is designed to serve a number of machines.
• Surprisingly fast filtration and completely clean sumps.
• Large chip strainer with side discharge for quick disposal of dry chips.
• Washable SS filter for reuse.
• Cleanliness down to less than 25microns using RE Magnetic filter.
• Easy to operate and maintain.
• No consumables.
• All these are done without stopping your machine!

Benefits :

• The dramatic increase in oil life.
• Substantial savings in oil purchase.

Extract the maximum out of your expensive coolant… Totally clean sumps!

Kleencool is a Mobile sump cleaner cum coolant recycler. You can recycle and reuse the contaminated coolant 2 -3 times and recover 80% of it per recycle. It works on the basis of stage wise removal of tramp oil, solid particles, smell and bacteria from metal working emulsion coolants. Recycling the coolant by Kleencool will remove tramp oil to less than 15 ppm, solid particles and make it free of bacteria and bad smell.

Technology : Powerful vacuum pump pulls out chips/sludge and floating oil along with coolant from all corners of machine sump in no time. A large strainer in vacuum tank holds the chips. The side discharge door lets you to empty the chips quickly. In the Oil-water separator the free tramp oil is removed and drained out. A filtration pump moves the coolant through 100/50 micron filter and 20 micron filter for fine filtration. An Ozone generator diffuses ozone in the coolant for complete bacterial disinfection. Clean coolant is returned to the sump. All these are done without stopping your machine!

Benefits :

• Contaminated waste coolant is made usable again and again
• Approx.80% of coolant recoverable
• Improved surface finish on components
• Increased tool life
• Better operator health.                                      
• Better machine up keep and shop environment.
• Extremely attractive payback and quick ROI. 

Extract the maximum out of your expensive coolant… Totally clean sumps!

Commercial kitchens, restaurants, canteens, milk diaries and food processing industries generate huge amounts of waste water laden with solid wastes, oils, butter and other contaminants. If improperly disposed they pollute the environment,   clog the drainage piping,   upset the biological process in STPs. It has been mandated by PCBs that it is the responsibility of such installations to treat the waste water safely before it enters the sewer. KleenOGS range offers multiple choices to the clients to treat the waste water in the best possible manner. Based on your needs you can choose from Underground/Full disposal/Partial disposal models. We offer properly sized OGS or Grease Traps as per the nature of waste water generation. Automation offers solid waste removal, grease evacuation, heating to separate oil&grease from wastewater, and pressure cleaning of internals.

Simple and innovative disposal solutions. It doesnt cost a bomb.

As process chemistries become more complicated, the wastewaters generated also are becoming more complex and more difficult to treat. At the same time, regulations for discharge to sewer and surface water are becoming more stringent. Most wastewaters, such as waste coolant, have suspended solids in them made up of dirt, metal particles, and other contaminants including oils and chemicals. Because oils and metals react at different pH levels, separate systems for their removal are needed calling for many tanks and large floor space. This is where KleerSEP scores.

Technology : Using step-by-step separation process , KleerSEP combines the techniques of straining out of bulk solids, coalescing to remove free floating oils, adsorption of microscopic oil, organic matter and smell by carbon treatment, flocculation of oily sludge out of waste water, dewatering of sludge, oxidizing residual oil and dissolved solids and also bacterial disinfection by ozonation, and polishing of output water by micro fibre filter to obtain clear water.

Advantages :

• Vertical high-rise system needing minimal floor space.
• Low Cost of Ownership.
• No fine adjustments such as pH and constant monitoring of process.

Safe and sure breaking solutions.

KleenPRO Oil filtration systems combine the latest filter media technology to offer unmatched oil cleanliness. NAS Class 4 and less than 200ppm moisture can be easily achieved. Large depth filter elements made of Glass fibre, Cellulose and Stainless steel offer high filtration rates with more dirt holding capacity. Rare Earth Magnetic filters of very high power captures microscopic Fe particles out of oils.

Advantages :

• Large Depth filters offer high flow rates with high dirt holding capacities.
• Reduced downtime and savings on elements replacements.
• Heat assisted Micro air bubble diffusion for rapid removal of moisture.
• Oils of high temperature of about 400 deg C can be perfectly filtered.
• Competitively priced replacement elements.
• On-line, Off-line and Mobile filtration systems to suit your applications.

Applications : Hydraulic oils, Lube oils, Turbine oils, Quenching oils and Fuels such as Petrol/Diesel/ATF.

Kleenmag Rare Earth magnetic filters use ultra high power RE Magnets and configured to exert maximum pulling power on ferrous particles circulating in liquids. The button shaped 11000 gauze RE magnets are assembled in thin walled SS-304/316 tubes and even the filter housing is of SS-304/316 grade. The unique design empowers the filter to capture maximum particles in motion and retain them for disposal. Each filter comes with a cleaning tool to remove the ferrous particles from the magnets outer tube. The result is cleaner fluids such as machine coolant, gear oil, hydraulic oil, quenching oil, lube oil and cutting oil.

Pollution norms are becoming stringent by the day and as a responsible service station operator you cannot afford to over look the problems of safe disposal of large amounts of wastewater generated in your facility. Well maintained car wash facilities typically use about 60-80 litres per vehicle without recycling wash water, and automatic systems with water recycling can use less than 28-40 litres. However, without water recycling or rigorous maintenance, automatic systems can easily use more than 280-300 litres per vehicle. KleenWASH offers a reliable solution to vehicle wash water recycling so that the water can either be safely discharged or reused saving money for you. KleenWASH separates oils, grease, sludge, bacteria and odor from the wash water through a well defined yet simple process.

KleenSEP oil-water separator is innovative and yet simple and economical. It is head and shoulders above the other gravity based separators offered by competition and has innovative features that are unmatched.

Technology : Oily water flows by gravity into the system or is pumped by a centrifugal pump using a self leveling floating suction device that pulls in large amounts of floating oil along with water. The oily water travels through the Oil-Water Separator where oil is separated by coalescing media. The oil rises to the top of the separator that can be drained out. Clean water that flows out of the separator will have less than 10PPM of oil and less than 25mg/ltr of TSS. Optional Micro fiber and Activated Carbon filters for polishing of output water also are provided.

Applications : Coolant tank tramp oil removal/Component washing solution cleaning/Compressor condensate water cleaning/Ship bilge water recycling/Rolling mill waste water.

Now, oil separation from water is no more a hassle.

Thermic fluid is subjected to high temperatures throughout its operating life. Owing to frequent overheating, it breaks into low boiling and high boiling components. While adequate venting or de-aeration will get rid of Low boiling compounds, high boiling compounds circulate in fluid as carbon sludge. These highly heat resistant carbon solids make the fluid viscous. If they are not removed regularly it could result into high fuel consumption, drop in thermal transfer efficiency and higher pumping cost. Kleenpro Thermic Fluid Filtration Systems offer unmatched filtration performance resulting in better thermal transfer efficiency, increased life of fluid, reduced power consumption due to faster heating and pumping, reduced system maintenance and improved final products. Large sized depth filter elements made of SS and GF process large quantities of hot fluids at upto 400 deg C(750 deg F) and remove particles down to 5 microns. Both On-line and Off-line models are available.

Kleenpro is a Mobile sump cleaner cum coolant filtration system.

Technology :

• It works on the basis of stage wise removal of solid particles of different sizes from cutting oil down to 25microns.
• It is designed to serve a number of machines.
• Surprisingly fast filtration and completely clean sumps.
• Large chip strainer with side discharge for quick disposal of dry chips.
• Washable SS filter for reuse.
• Cleanliness down to less than 25microns using RE Magnetic filter.
• Easy to operate and maintain.
• No consumables.
• All these are done without stopping your machine!

Benefits :

• The dramatic increase in oil life.
• Substantial savings in oil purchase.

Extract the maximum out of your expensive coolant… Totally clean sumps!

Kleencool is a Mobile sump cleaner cum coolant recycler. You can recycle and reuse the contaminated coolant 2 -3 times and recover 80% of it per recycle. It works on the basis of stage wise removal of tramp oil, solid particles, smell and bacteria from metal working emulsion coolants. Recycling the coolant by Kleencool will remove tramp oil to less than 15 ppm, solid particles and make it free of bacteria and bad smell.

Technology : Powerful vacuum pump pulls out chips/sludge and floating oil along with coolant from all corners of machine sump in no time. A large strainer in vacuum tank holds the chips. The side discharge door lets you to empty the chips quickly. In the Oil-water separator the free tramp oil is removed and drained out. A filtration pump moves the coolant through 100/50 micron filter and 20 micron filter for fine filtration. An Ozone generator diffuses ozone in the coolant for complete bacterial disinfection. Clean coolant is returned to the sump. All these are done without stopping your machine!

Benefits :

• Contaminated waste coolant is made usable again and again
• Approx.80% of coolant recoverable
• Improved surface finish on components
• Increased tool life
• Better operator health.                                      
• Better machine up keep and shop environment.
• Extremely attractive payback and quick ROI. 

Extract the maximum out of your expensive coolant… Totally clean sumps!

Commercial kitchens, restaurants, canteens, milk diaries and food processing industries generate huge amounts of waste water laden with solid wastes, oils, butter and other contaminants. If improperly disposed they pollute the environment,   clog the drainage piping,   upset the biological process in STPs. It has been mandated by PCBs that it is the responsibility of such installations to treat the waste water safely before it enters the sewer. KleenOGS range offers multiple choices to the clients to treat the waste water in the best possible manner. Based on your needs you can choose from Underground/Full disposal/Partial disposal models. We offer properly sized OGS or Grease Traps as per the nature of waste water generation. Automation offers solid waste removal, grease evacuation, heating to separate oil&grease from wastewater, and pressure cleaning of internals.

Simple and innovative disposal solutions. It doesnt cost a bomb.

As process chemistries become more complicated, the wastewaters generated also are becoming more complex and more difficult to treat. At the same time, regulations for discharge to sewer and surface water are becoming more stringent. Most wastewaters, such as waste coolant, have suspended solids in them made up of dirt, metal particles, and other contaminants including oils and chemicals. Because oils and metals react at different pH levels, separate systems for their removal are needed calling for many tanks and large floor space. This is where KleerSEP scores.

Technology : Using step-by-step separation process , KleerSEP combines the techniques of straining out of bulk solids, coalescing to remove free floating oils, adsorption of microscopic oil, organic matter and smell by carbon treatment, flocculation of oily sludge out of waste water, dewatering of sludge, oxidizing residual oil and dissolved solids and also bacterial disinfection by ozonation, and polishing of output water by micro fibre filter to obtain clear water.

Advantages :

• Vertical high-rise system needing minimal floor space.
• Low Cost of Ownership.
• No fine adjustments such as pH and constant monitoring of process.

Safe and sure breaking solutions.

KleenPRO Oil filtration systems combine the latest filter media technology to offer unmatched oil cleanliness. NAS Class 4 and less than 200ppm moisture can be easily achieved. Large depth filter elements made of Glass fibre, Cellulose and Stainless steel offer high filtration rates with more dirt holding capacity. Rare Earth Magnetic filters of very high power captures microscopic Fe particles out of oils.

Advantages :

• Large Depth filters offer high flow rates with high dirt holding capacities.
• Reduced downtime and savings on elements replacements.
• Heat assisted Micro air bubble diffusion for rapid removal of moisture.
• Oils of high temperature of about 400 deg C can be perfectly filtered.
• Competitively priced replacement elements.
• On-line, Off-line and Mobile filtration systems to suit your applications.

Applications : Hydraulic oils, Lube oils, Turbine oils, Quenching oils and Fuels such as Petrol/Diesel/ATF.