Power Tools in Greater Noida

• Spindle Travel : 225 mm
• Net Weight : 485 Kgs.
• Dia. of Column : 127 mm
• Machined Area of Base : 600 x 715 mm
• Elevating Motor : 0.5 HP 1440 RPM
• Drill Head Motor : 1 HP 1440 RPM
• Vee Belt : B40
• Size of Box Table : 205 x 205 x 285 mm
• Overall Height : 1420 mm
• Maximum Spindle Centre to Column : 665 mm

We are leading supplier of this product. more...

• Tapping Capacity in M. S. : --- --- 14
• Drilling Capacity in M. S. : 13 19 19

We are leading supplier of this product. more...

Standard Accessories Box Table, Electric Motors AC/400/440 Volts, Panel Board for Centralised electrical Controls and Limit Switches.  Machine Lamp, Coolant Pump Complete with fittings, Set of Foundation Bolt, Instruction Manual, Spare part List & Tool Box Special Accessories :  Machine Vice, Boring Attac more...

• Warrenty : 2 Years
• Driven Type : Hydraulic
• Automatic Grade : Semi Automatic
• Application : Drilling Rail
• Weight : 40-60kg

more...

• Certification : CE Certified
• Warrenty : 1 Year
• Weight : 10-20kg
• Automatic Grade : Semi Automatic
• Application : Cutting Rail
• Driven Type : Mechanical

more...

13 MM Bench Type Pillar Drill more...

This cut takes place on the draw stroke & the hydraulically liften out of contact with the workpiece on the forward stroke to prevent wear or the blade & can out metals of all kinds & strength. FEED : Two levers are provided at the pot one regulators the rate of feed while the other enabled the bow slide to more...

All Geared Radial Drill.  Standard Accessories Box Table, Electric Motors AC/400/440 Volts, Panel Board for Centralised electrical Controls and Limit Switches.  Machine Lamp, Coolant Pump Complete with fittings, Set of Foundation Bolt, Instruction Manual, Spare part List & Tool Box Special Accessories :  more...

• Radial Run Out : Less than 0.2mm (Wobble Free) No Dynamic Balancing Required
• Weight : As Per Diameter.
• Color : Grey, Metallic
• Shape : Round
• Diameter : Maximum 2500mm in Diameter
• Application : Industrial
• Type : Circular Saw Blades

Our circular Hot Saw blades have redefined hot sawing industries. Through many years of research and development in these applications, we have developed a product that surpasses all others in terms of wear life and performance. Combining superior machinery, craftsmanship and raw material with this product re more...

• Material : Tungsten Carbide
• Shape : Circular
• Thickness : 1.5mm
• Color : Grey
• Finishing : Coated
• Application : Paper Cutting

Advantage of Tungsten Carbide Razor Knife Compared to HSS and d2, Tungsten Carbide has many advantages which are suitable for many slitting applications. The most important advantage is very long running life. In many situations, it can be as much as 10 to 20 times as seen in the paper, cardboard or corrugate more...

• Type : HSS Dm05/HSS M2 Cobra Circular Saw Blades
• Weight : As Per Diameter
• Usage : Industrial
• Shape : Round
• Color : Black, Grey, Brown As Per Coating
• Finishing : Untreated Etc.

Apex Shears produces our HSS M2 Circular Saw Blades and TCT Circular Saws for Metal Tube and Pipe Cutting operations. Non-ferrous blades are suitable for applications requiring durable cut-off saws running at substantially higher RPM's than ferrous cutting saws. The ferrous metal cutting industry consumes a l more...

• MOQ : 1 Piece(s)
• Power : 1-3kw
• Weight : 100-200kg
• Driven Type : Electric
• Voltage : 220V, 380V
• Supply Type : Manufacturer

Our company is a major Manufacturer and Supplier of 38MM Pillar Drilling Machines in Bhavnagar. Using the latest manufacturing techniques, our company prepares 38MM Pillar Drilling Machines that are sturdy in their design. Used for production and tool room jobs, these 38MM Pillar Drilling Machines are made of more...

• MOQ : 1 Piece(s)
• Weight : 2000-4000kg
• Rated Power : 1-3kw
• Drilling Speed : 79 to 2024
• Automatic Grade : Manual
• After-Sales Service Provided : Yes
• Brand Name : MADHAV
• Supply Type : Manufacturer
• Color : Green
• Condition : New

Our company is a reputed Manufacturer and Supplier of  38MM Pillar Drilling Machine . We produce sturdy and high-quality 38MM Pillar Drilling Machines from raw materials like cast iron and EN bar. These 38MM Pillar Drilling Machines are used for production as well as tool room jobs. The 38MM Pillar Drilling more...

• MOQ : 1 Piece
• 8) Spindle Travel : 255
• Supply Type : Manufacturer
• 5) Max. Dist. Spindle nose to Base : 1000
• 17) Motor 1440rpm : 1.5HP
• 15) over all Height with Guard : 1750
• 12) Table Size : 380x380
• 1) Drilling Capacity : 38
• 6) Dist. from Spindle center to Pillar Surface : 285
• 16) V-Belt Section : B-58

We are offering 38mm capacity pillar drilling machine. We offer pillar drilling machine that is made of high grade cast iron, en bar, etc. Using latest technology of manufacturing. The heavy duty pillar drilling machine, we offer, is used for variety of operations like drilling, boring, reaming and honning. more...

• MOQ : 1 piece
• Fine Feed : No
• Brand Name : ALLCUT
• Stroke Length : 50mm
• Adaptor : Direct 19mm Weldon Shank
• Overload Protection : Yes
• Torque Control : No
• Gearbox : 1-speed
• Supply Type : Manufacturer
• Core Drilling Depth : 50mm

more...

• MOQ : 1 Piece
• Twist Drilling Capacity : 28 mm
• Reaming Capacity : 28 mm
• Spindle Taper : MT-3
• Supply Type : Manufacturer
• Reverse/Forward : Yes
• Weight : 28 kg
• Stroke Length : 250 mm
• Speed Range : 150-550 rpm
• Core Drilling Depth : 50/75 mm

more...

• MOQ : 1 piece
• Tapping Capacity : M24
• Reverse/Forward : Yes
• Motor Power : 1800 W
• Electromagnet Dimensions : 245X125X50 mm
• Electronic Speed Control : Yes
• Speed Range : 60-430 rpm
• Supply Type : Manufacturer
• Stroke Length : 300mm
• Twist Drilling Capacity : 31mm

The Allcut cutXpert 31/85 is a heavy duty magnetic drill machine equipped with a powerful 1800 Watt motor and morse taper 3 and reversible motor. So, it can be used for twist drilling, annular cutting, reaming and tapping. With a powerful 2-speed gearbox and electronic speed control, you have the total contro more...

• MOQ : 1 Piece
• Max. Cutting Heigh : 60mm
• Gross Weight : 151KGS
• Push Paper : Automatic
• Supply Type : Manufacturer
• Safely : IR Bar
• Precision : 0.3mm
• Shipping Dimension(mm) : 935X810X810mm
• Clamp Paper : Automatic
• Cutting length behind knife : 460mm

more...

• MOQ : 1 piece
• Packing size : 410x430x770mm
• Feature : Excellent Quality
• Supply Type : Manufacturer
• Country of Origin : India
• Machine size : 400x380x690mm
• Binding Speed : 100-150per minute
• Power Supply : 220V50HZ 250W
• Condition : New

SINGLE HEAD ELECTRIC WIRE SADDLE STAPLER� YOZ WS100 Single head riding binding machine YOZ WS100   Operation mode Electric   Bound form Horse riding nail   Binding thickness 0.5-60MM   Binding Speed 100-150per minute   Power Supply 220V50HZ 250W   Machine size 400x380x690mm &nb more...

• MOQ : 1 Piece(s)
• Frequency (MHz) : 50 Hertz (HZ)
• Pressurization : Low Pressure
• Warranty : 1 Year
• Power : Single phase to 3 Phase Watt (w)
• Supply Type : Manufacturer
• Power Source : Electric Blower
• Voltage : 220 to 415 Volt (v)
• Material : Cast Iron

more...

• MOQ : 1 Piece(s)
• Frequency (MHz) : 50 Hertz (HZ)
• Rated Power : Single phase to 3 Phase Watt (w)
• Voltage : 220 to 415 Volt (v)
• Supply Type : Manufacturer
• Material : Cast Iron, other
• Power Source : Electric Blower
• Warranty : 1 Year
• Application : Industrial

more...

• MOQ : 1 Piece(s)
• Voltage : 220 to 415 Volt (v)
• Power Source : Electric Blower
• Warranty : 1 Year
• Supply Type : Manufacturer
• Color : Sky Blue
• Application : Industrial
• Pressurization : Low Pressure
• Power : Single phase to 3 Phase Watt (w)
• Material : Cast Iron

more...

• Threading : With Tapping Attachment
• Height : 370-512
• Supply Type : Manufacturer
• Motor Power : 1800W
• Spindle Type : MT-3 &19,05 Weldon
• Twist Drills : 1-32mm
• Stroke Length : 250mm
• Measurement (LxWxH ) : 180 x 112 x 470
• Length : 255mm
• Total Power : 2250W

Features: Four-Speed Magnetic Base Drilling machine. Drilling by Broach and Drill Bits. Swivel Type Magnetic Base to allign the hole easily. Eibenstock Magnetic Base Drilling machine. more...

• Working Range Max. Dist. Spindle Nose to Table : 560mm
• Supply Type : Manufacturer
• Model : JIP38T
• Feed Type : Pneumatic Feed
• Power Drill Head Motor : 1.5 HP
• Drilling Cap. In C.I. : 50mm
• Diameter of RAM : 78
• Spindle Travel : 250mm
• Tapping Cap. In M.S. : 25mm
• Machine Measurement( L × W × H ) : 500 × 500 × 1600

Features: Handle Type Table Bracket Lock. Hardened Spindle, Internally and Externally Grounded. Spindle Rotates on Taper Roller Bearings. Gears Made up of 25 Graded Cast and Balanced on High Precision Machine. Threaded Spindle with Arbor Holding Nut. more...

• MOQ : 1 piece
• Capacity Drilling Cap. In M.S. : 38
• Dist. From spindle Nose to Base : 1050
• Supply Type : Manufacturer
• Drilling Head Spindle Hole Taper : MT- 4
• Column Diameter : 120
• Drilling Cap. In C.I. : 50
• Spindle Center to Column : 306 (13 inch)
• Spindle Travel : 250mm
• Tapping Cap. In M.S. : 25

Features: Handle Type Table Bracket Lock. Handened Spindle, Internally and Externally Grounded. Spindle Rotates on Taper Roller Bearings. Gears Made up of 25 Graded Cast and Balanced on High Precision Machine. Threaded Spindle with Arbor Holding Nut. more...

• MOQ : 1 piece
• Finishing : Polished
• Specialities : Rust Proof, Long Life, High Performance, Easy To Operate
• Drilling Speed : 6000 RPM
• Phase : 3
• Supply Type : Manufacturer
• Country of Origin : India
• Operating Mode : Automatic
• Color : Orange
• Usage : CNC Plate Drilling

yantra design is one of the leading manufacturer in manufacturing cnc plate drilling machine. yantra design have served high quality cnc plate sheet drilling machine in all over the globe including high demanded locations like raipur, ghaziabad, pune, bengaluru, delhi, hyderabad, indore, mumbai and kolkata.  more...

• MOQ : 1 piece
• Max. Drilling Speed : 6000 RPM
• Finishing : Polished
• Color : Blue
• Driven Type : Electric
• Material : Mild Steel
• Machine Weight : 11000 Kg
• Place of Origin : India
• Supply Type : Manufacturer
• Condition : New

Yantra Design, Premier CNC Drilling Machine Manufacturer is Offering Complete Automatic CNC Drilling Machine in Gujarat at affordable rates. Extensively used in different industries, this CNC Drilling Machine is manufactured using quality tested components and ultra-modern technology. Our quality examiners te more...

• MOQ : 1 piece
• Place of Origin : India
• Drilling Depth : Up to 40 mm
• Brand Name : Yantra Design
• Supply Type : Manufacturer
• Warranty : 1 Year
• Material : Mild Steel
• Maximum Drilling Speed : 6000 RPM

Yantra Design, Premier CNC Drilling Machine Manufacturer is Offering Complete Automatic CNC Beam Drilling Machine in Maharashtra. Yantra Design have served High Quality CNC Beam Drilling Machine in all over India including high demand locations like Maharashtra, Ghaziabad, Pune, Maharashtra, Delhi, Hyderabad, more...

• MOQ : 1 Piece
• Air Volume : 500-125000 CFM
• Supply Type : Manufacturer
• Brand Name : Blowtech
• Warranty : 1year
• Material : MS, SS, PP, FRP, PP + FRP, Aluminium
• Driven Type : Electric
• Voltage : 220V
• Weight : 40 Kg - 500 Kg
• Country of Origin : India

more...

• MOQ : 1 Piece
• Country of Origin : India
• Flow Rate : 0-1000 cfm, 6000-9000 cfm, 1000-3000 cfm, >12000 cfm, 9000-12000 cfm, 500 CFM TO 125000 CFM, 3000-60
• Fan Speed : 2000-3000 rpm, >3000 rpm, 1000-2000 rpm, 500-1000 rpm, 0-500 rpm
• Application : Industrial Use
• Motor Rating : 0.5 HP To 200.0 HP, 0-1 HP, 9-12 HP, 6-9 HP, 3-6 HP, >12 HP, 1-3 HP
• Supply Type : Manufacturer
• Material : MS, SS, PP, FRP, PP + FRP, Aluminium
• Brand Name : Blowtech

more...

• MOQ : 1 Piece
• Material : MS, SS, PP, FRP, PP + FRP, Aluminium
• Warranty : 1year
• Application : Industrial
• Supply Type : Manufacturer
• Brand Name : Blowtech
• Color : Grey
• Driven Type : Electric
• Country of Origin : India
• Automatic Grade : Automatic

more...