Gp Enterprises Hyderabad, Telangana

Crack Sealer is used for sealing cracks on plaster, masonry, and concrete substrates. Crack Sealer is the single part, non-shrink cementitious crack sealer for plaster, masonry, and concrete and can be painted after application. Crack Sealer can be used for horizontal, vertical, and overhead applications, no sagging. Crack Sealer offers good adhesion. We market Crack Sealer under the brand name of ‘Crackseal Bond – U’.

Advantages :

• Single part, non-shrink cementitious crack sealer for plaster, masonry and concrete
• Easy to use since single component
• Versatile
• Non-sagging
• Good adhesion
• Non-shrink
• Our brand name : Crackseal Bond – U

We supply Waterproof Coating of Hydrocoat Bond – F. Waterproof Coating is the two component acrylic modified cementitious coating for concrete and masonry surface. Our Waterproof Coating can be applied directly to the concrete and masonry. Waterproof Coating has excellent adhesion, thus it can bond to porous and non-porous surfaces. Further, our Waterproof Coating has high resistance to carbon dioxide attack and chloride ion diffusion and it is excellent for damp proofing basements below grade.

Area Of Application :

• Designed to even out variations in concrete and masonry surfaces
• Provides seamless, flexible, waterproof coating suitable for use in water tanks, reservoirs, sealing tie bar holes to ensure water tightness

The effectiveness of an admixture depends on several factors including : type and amount of cement, water content, mixing time, slump, and temperatures of the concrete and air. Sometimes, effects similar to those achieved through the addition of Special Purpose Admixtures. We offer premium quality Special Purpose Admixtures to our valued clients. We are quality oriented Supplier of Special Purpose Admixtures.

We offer below mentioned Special Purpose Admixtures :

• Retarding admixtures : Conflo bond-R
• Accelerating admixtures- Conflo Bond – A
• Air Entraining Agents-ADMIXTURE : Conflo Bond – AE
• Integral  Waterproofers-ADMIXTURE :  Conflo Bond – W1 ,    Conflo Bond – W2
• Block Admixtures-ADMIXTURE- Mortarflo Bond – B
• Sprayed Concrete Accelerators : Conflo Bond Spray Set
• Underwater concrete admixture : Conflo Bond – UWA

Desiccant absorbs the moisture and keeps the water in the form of gel, thus water could not be leaked. Desiccant is made up of high quality tyvek paper, LD, certified by SGS and under testing with TUV-Germany. Desiccant is used in aerospace, auto motives, communications, electronics, leather products, medical equipment and so on. Desiccant is available with us in different quantity, from 1 gram to 100. Clients can have sample before placing any order.

We offer Grout Chemicals to our valued clients. Grout Chemicals are manly used to stop leaks in basements, commercial buildings, dams, manholes, parking garages, reservoirs, storage tanks, subways, tunnels, waste water treatment plants, and in other structures. Grout Chemicals fill crack completely, form a permanent seal and remain flexible. These attributes make our Grout Chemicals apt for filling leaks.

Our Product Range :

• Free Flow Non-Shrink High Strength Grouts- Cemgrout Bond – 540 and Cemgrout Bond – 720
• Expanding Grout- Expangrout Bond – U
• Low Viscosity Epoxy Grout- EP Grout Bond – 2C
• Low Exotherm, Epoxy Resin Free Flow Grout- EP Grout Bond - 3C
• Resin Based Anchor Grouts- PE Grout Bond – U

Concrete Plasticizer usually reduces the required water content for a concrete mixture by about 5 to 10 percent. Consequently, concrete containing a water-reducing admixture needs less water to reach a required slump than untreated concrete. The treated concrete can have a lower water-cement ratio. This usually indicates that a higher strength concrete can be produced without increasing the amount of cement. We offer Concrete Plasticizer in different quantity, catering diverse demands of the clients. We offer Concrete Plasticizer at pocket friendly price.

The Concrete Plasticizer range we have :

• Conflo Bond – P1-
• Conflo Bond- P2

Selecting the correct Tile Adhesives is just as important as selecting the right tile for the project. The job of the adhesive is to bond the bottom of the tile to a surface, called the setting bed. In the last few years, there have been vast improvements in adhesives, which make it easier for people to lay tile themselves, without contracting the job out to a professional. Organic mastics and thin-set mortar are most common, although latex,  acrylic, and epoxy are also used. We offer premium quality of Tile Adhesives that ensure strong adhesion for years.

Our product range :

• For Tile fixation : TILE BOND –U
• Epoxy screed for Tiles : Tile joint screed-EP
• For joints : TILE JOINTFILLER BOND-U

Floor Hardeners is ideally suited for all industrial areas subject to the heaviest traffic, e.g., loading bays, trucking lanes, car parks, workshops, machine shops, ramps and spillways. We offer Floor Hardeners under the brand name of Florgard Bond – M. It is non-metallic surface floor hardener, provides a highly abrasion resistant surface to concrete floors by the dry shake-on system. Our Floor Hardeners bonds monolithically to the base concrete and ensures hardwearing surface.

We supply Construction Adhesives under the brand name of MULTIFIX BOND – U. Our Construction Adhesives gives an impermeable layer, which minimizes shrinkage in the system. MULTIFIX BOND – U can used to bond AAC bricks, cement bricks, conventional bricks. Construction Adhesives that we offer can fix ceramic tiles, quartz tiles, marbles, gypsum boards. Our Construction Adhesives is a single component, suitable for the bonding of different construction materials in interior and exterior.

Microconcrete is a dry ready mix Micro Concrete based composition formulated to repair areas where the concrete is damaged & is restricted in movement making the placement of conventional concrete difficult. Micro Concrete is supplied as a ready to use dry powder, which requires only addition of clean water at site to produce a free flowing non-shrink repair micro concrete. Micro Concrete comes with additives, which imparts controlled expansion characteristics in the plastic state with reduced water demand.

Purpose : For the repair of damaged reinforced concrete elements like beams, columns, wall etc., where access is restricted and compaction is not possible. Also, for jacketing of RCC columns to increase their load bearing capacity.

Our brand Name :

• Microcon Bond – C,
• Microcon Bond – UWG

Superplasticizers, also known as plasticizers or high-range water reducers (HRWR), reduces water content by 12 to 30 percent and can be added to concrete with a low-to-normal slump and water-cement ratio to make high-slump flowing concrete. Flowing concrete is a highly fluid but workable concrete that can be placed with little or no vibration or compaction. The effects of Superplasticizers lasts only 30 to 60 minutes, depending on the brand and dosage rate, and is followed by a rapid loss in workability. As a result of the slump loss, Superplasticizers are usually added to concrete at the jobsite.

The Superplastisizers range we have :

• Conflo Bond – SP1
• Conflo Bond – SP2

We have hydrocoat bond f. As it is a excellent water resistant barrier.it will have resistance to both positive and negative pressures.Usage: water tanks, sumps, roof, roof gardens.Advantagesexcellent barrier to carbon dioxide, chloride and sulphate ionsallows water vapour to escape from the structurewaterproof-suitable for water retaining structureshigh resistance to the effect of long-term weathering, durable in all climate conditions.Non toxic - ideal for potable water tanksflexible, with thermal expansion similar to concreteexcellent bond to concrete and masonrygood crack accommodation capacityminimum surface preparation needed and low labour cost

We are offering pe grout bond u. It is a polyester resin based two component system, made to give excellent anchorage. It can be used for anchoring situations above 20 mm, annular size. High strength corrosion resistant, polyster resin anchoring grouts. Suitable for permanent of bolts, dowels, starter bars etc. Advantages: rapid strength gainvibration resistantcorrosion resistantnon expansivecan be placed under water

We have cemgrout bond-540 is formulated cementitious grout which is non-shrink and free flowing, making ideal for machine foundations.it withstands both static and dynamic load transferred by the machine on it. Advantages: non-shrink - will continue to occupy the filled space without shrinkage. Continues to provide support to the bearing areas and dampens vibrationfree flow - ensures high level of contact with load bearing area. Also helps complete filling without voids. No need for external aids like rodding, poking, chaining etc.Pre-packed and factory controlled - consistency and reliability ensured. Site batching and blending variations eliminatediron free - no chance of deterioration by uncontrolled rust expansion, corrosion and staining of groutchloride free - does not cause corrosion of machine parts, anchor bolts etc., in contact with grout.

We are offeirng cemgrout bond-720. It is used for machine foundations, concrete anchors, columns in precast constructions, cavities.gaps and boiler foundations etc advantages gaseous expansion system compensates for shrinkage and settlement in the plastic stateno metallic iron content to cause stainingpre-packed material overcomes onsite batching variationsdevelops high early strength without the use of chlorideshigh ultimate strength ensure the durability of the hardened groutfree flow ensures high level of contact with load bearing area

Pigmented cementitious tiles joint filler.Used as a grout for dry tile joints in kitchens, bathrooms, shower stalls, swimming pools, etc.

We have expangrout bond-u. It is an admixture for site batched cementitious grouts where a reduced watercement ratio and positive expansion is required. Applications include bed grouting, duct grouting, non-shrink infilling and jointing. advantages: gaseous expansion system compensates for plastic shrinkage and settlement in properly designed cementitious groutreduced watercement ratio mixes in the grout mix ensures low permeability and long term durability in servicegives grout high fluidity with low watercement ratio, thus making placement or injection of the grout easy.No metallic iron content to corrode and cause staining or deterioration due to rust expansion in the grout.Composition allows high early strength development in grouts, without the use of chlorides.

Hydrocoat bond-a is an excellent waterproof coating ideal for external walls.it forms a film over the surface which enhance impermeability.it has excellent adhesion to substrate. because of it's off white color any color can be applied directly without primer thus resulting in cost reduction.