Gopal Forge Industries

Kumbharwada, Mumbai, Maharashtra

Available MaterialsStainless Steel: ASTM A 240, SA 240, AISI Type: 304, 304L, 304H, 310, 310S, 316, 316L, 316Ti, 317, 317L, 321, 321H Carbon Steel: ASTM A 515, A 516 Grade: 60, 70 B 2062 Alloy Steel: ASTM A 387, Class: III, Grade: 11, 22, 5, 9, 12, 1 Nickel Alloys: B162, B127, B463, B576, B168, B443 Copper Alloys: Aluminium, Copper, Brass & Gunmetal

CopperElectrolytic Copper, Electrolytic Tough Pitch Copper, Deoxidised Copper, Aresenical Phosphoresced Copper, General Purpose Commercial Copper and High Conductivity Copper Forms:Round Hexagonals, Squares, Rods, Tubes, Sheets, Strips, Foils, Busbars, Plate, Flats, Wire, Tubings, Sections & Bushes. AluminiumAluminium, Aluminium Bronze, Aluminium Silicon Bronze, Manganeese Bronze, Phospherous Bronze, Gunmetal. Forms:Round Hexagonals, Squares, Rods, Tubes, Sheets, Strips, Foils, Busbars, Plate, Flats, Wire, Tubings, Sections & Bushes. Brass:Free Cutting Brass, Leading Brass, Foreign Brass, Reviting Brass, Lead Free Brass, Hightensile Brass, Neval Brass, Gilding Brass, Red Brass, Low Brass, Catridge Brass, Yellow Brass, Basis Brass & Muntz Brass. Forms:Round Hexagonals, Squares, Rods, Tubes, Sheets, Strips, Foils, Busbars, Plate, Flats, Wire, Tubings, Sections & Bushes.

We are manufacturer and leading supplier of flanges in all materials and forms like weldneck flanges, slip on flanges, socket weld flanges, flat flanges, threaded flanges, blind flanges, plate flanges etc.We manufacture these products in accordance with international standards and compliances.

The most common facings machined on flanges are:(a) Raised face, 1/16 inch for 150lb and 300lb, inch for 400lb and heavier.(b) Flat face, for 150lb and 300lb only, other may be flat face on request.(c) Ring type joint, may be applied to all pressure ratings.

Available Materials

Stainless Steel:ASTM A 182, A 240
Grade:F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H, 904L etc.

Carbon Steel:ASTM A 105/A694/F42/46/52/56/60/65/70/A350 LF2 etc.

Alloy Steel:ASTM A 182, F1, F11, F22, F5, F9, F91etc.

Nickel Alloys:Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy 904

Duplex Steel
Grade:2205 (UNS No. S31803), 2207 (UNS No. S32760)

Nickel Alloy
Grade:Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020), Titanium (Grade I & II)

Copper Alloy
Grade:UNS No. C 10100, 10200, 10300, 10800, 12000, 12200, 70600, 71500, UNS No. C 70600 (Cu -Ni- 90/10), C 71500 (Cu -Ni- 70/30)

We are manufacturer and leading supplier of buttweld fittings in all materials and forms like 90 elbow, 45 elbow, tee, cross, reducers, pipe cap etc.We manufacture these products in accordance with international standards and compliances.

SEAMLESS BUTTWELD FITTINGSSeamless butt welding fittings are produced from seamless tube and pipe by either a hot or cold forming process. Seamless butt welding fittings are available in standard sizes, as published in the relevant product tables, and in non-standard sizes. Standard size fittings are generally ex stock.

WELDED BUTTWELD FITTINGS

Seam-welded buttwelding fittingsSeam-welded butt welding fittings are produced from hotrolled, annealed and pickled sheet or plate, formed into half shells or segments and longitudinally seam-welded. Seam-welded butt welding fittings are available in standard sizes, as published in the relevant product tables, and in non-standard sizes. Standard size fittings are generally ex stock.

Available Materials

Stainless Steel:ASTM A403
Grade:WP 304, 304L, 304H, 316, 316L, 316Ti, 310, 347, 347H, 904L etc.

Carbon Steel:ASTM A 234 WPB / A420 WPL3 / A420 WPI 6/ MSS-SP-75 WPHY 42/46/52/56/60/65/70

Alloy Steel:ASTM A 234 WP1 / WP5 / WP9 / WP11 / WP22 / WP91 etc.

Nickel Alloys:Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020), Titanium (Grade I & II)

Duplex Steel
Grade:2205 (UNS No. S31803), 2207 (UNS No. S32760)

Nickel Alloy
Grade:Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020), Titanium (Grade I & II)

Copper Alloy :Aluminium, Copper, Brass & Gunmetal UNS No. C 10100, 10200, 10300, 10800, 12000, 12200, 70600, 71500 UNS No. C 70600 (Cu -Ni- 90/10), C 71500 (Cu -Ni- 70/30)

We are manufacturer and leading supplier of threaded fittings in all materials and forms like 90 elbow, 45 elbow, tee, cross, reducers, pipe cap etc.We manufacture these products in accordance with international standards and compliances.

Available Materials

Stainless Steel:ASTM A182
Grade:F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H , 904L etc.

Carbon Steel:ASTM A 105, A694 F42/ 46/ 52/ 56/ 60/ 65/ 70/ A350 LF3/ A350 LF2

Alloy Steel:ASTM A 182, Grade F1, F11, F22, F5, F9, F91 etc.

Nickel Alloys:Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020), Titanium (Grade I & II)

Duplex Steel
Grade:2205 (UNS No. S31803), 2207 (UNS No. S32760)

Nickel Alloy
Grade:Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020), Titanium (Grade I & II)

Copper Alloy :
Grade:UNS No. C 10100, 10200, 10300, 10800, 12000, 12200, 70600, 71500UNS No. C 70600 (Cu -Ni- 90/10), C 71500 (Cu -Ni- 70/30

We are manufacturer and leading supplier of threaded fittings in all materials and forms like 90 elbow, 45 elbow, tee, cross, reducers, pipe cap etc.We manufacture these products in accordance with international standards and compliances.

Available Materials

Stainless Steel:ASTM A182
Grade:F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H , 904L etc.

Carbon Steel:ASTM A 105, A694 F42/ 46/ 52/ 56/ 60/ 65/ 70/ A350 LF3/ A350 LF2

Alloy Steel:ASTM A 182, Grade F1, F11, F22, F5, F9, F91 etc.

Nickel Alloys:Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020), Titanium (Grade I & II)

Duplex Steel
Grade:2205 (UNS No. S31803), 2207 (UNS No. S32760)

Nickel Alloy
Grade:Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020), Titanium (Grade I & II)

Copper Alloy :
Grade:UNS No. C 10100, 10200, 10300, 10800, 12000, 12200, 70600, 71500UNS No. C 70600 (Cu -Ni- 90/10), C 71500 (Cu -Ni- 70/30

We are manufacturer and leading supplier of Pipes & Tubes in all materials and forms like Seamless pipes and Welded pipes .We manufacture these products in accordance with international standards and compliances.

We are manufacturer and leading supplier of Sheets & Plates in all materials and forms .We manufacture these products in accordance with international standards and compliances.