Goodrich Gasket Private Limited

Kelambakkam, Chennai, Tamil Nadu

Our company manufactures and exports high-grade Hammer Union in the market. We are certified with API-16C Certification and provide impeccable Hammer Unions & Swivel Joints. Our company offers a wide range of standard and sour gas hammer unions. Each union whether standard or sour gas is carefully inspected to assure long, dependable service even under extreme conditions. We provide this Hammer Union at the most affordable price range. Our Hammer Union is made by using the latest technology and state-of-the-art manufacturing equipment. Highlights :

• Strong make
• Durable
• Reasonably priced
• Low maintenance required

Soft Cut Gaskets:- Soft Gasket is a term used when referring to a gasket that is easily compressed under a low bolt load. Soft gaskets are used as heat exchanger gaskets, compressor and bonnet valve gaskets and in pipe flange applications etc. As leading gasket manufacturers and suppliers Goodrich Gasket Pvt. Ltd. offers varieties of cut shape / gasket material in sheets / rolls out of the following soft gasket materials: 1. PTFE Gasket Sheet 2. Flexible graphite sheet3. Rubber of all grades, cloth inserted rubber & metal inserted rubber gaskets.4. Ceramic / Glass Fiber5. Vegetable Fiber sheet6. Asbestos & Non Asbestos sheet7. PTFE Envelope gaskets PTFE (Polytetrafluoroethylene) is an inert material with excellent chemical resistance, electrical and thermal insulation. They can be operated in temperatures from cryogenic to 2600C offering non-corrosive, non-wetting, non-contaminating and odorless operation. PTFE gaskets by Goodrich Gasket are mainly used in the presence of aggressive chemicals such as acids, bases and solvents. Neoprene Gasket used in weather sealing and electrical installation applications possesses good chemical inertia and is appreciated for non-marking, high abrasion resistance, ozone and oil resistant, flame resistance and weather aging characteristics. Gasket materials offered: Neoprene (CR), Nitrile (NBR), Natural Rubber (NR), EPDM etc. Compressed Non Asbestos Fiber Gaskets are circle cut or die cut gaskets from compressed non asbestos jointing, manufactured from carefully picked fiber intimately blended with suitable heat resistant binders and vulcanized into sheets of homogenous compositions and uniform thickness. RAISED FACE FULL FACE Non-Asbestos Jointing Sheets are made of special non-asbestos heat-resisting fiber, heat-resisting packing material and special rubber compound by heating and compression molding it. These are used in high temperature and high pressure gasket applications.

Insulating Flange Kit is essentially used for pipeline flange corrosion protection, where a seal is required between dissimilar flange materials. The use of dissimilar metallic flanges with a conductive gasket material accompanied with a suitable electrolyte may set up a galvanic cell which will corrode the anodic metal. Insulating Flange Kit is also used to electrically isolate flange joints, preventing the flow of electrostatic charge along pipelines. We provide the clients with high quality Insulating Flange Kit at the most reasonable price range. This Insulating Flange Kit is made by using high quality raw materials and has been highly appreciated in the market. Highlights :

• The insulating gasket set consist of one gasket; with one sleeve, two insulating washers and two steel washer for each bolt in line with ASME B16.5 flange.
• There are three standard Types of insulating sets available to suit raised face, flat face, and ring grooved flanges, as illustrated below :
  • Goodrich Insulation Gaskets For Type "F" Raised Face FlangesIn this type, the central gasket is designed to be located inside the flange bolt circle and sits fully on the raised face porting of the flange. This type of gaskets will be supplied in all the materials like Phenolic and Glass / Epoxy with Neoprene Rubber coating.
  • Goodrich Insulation Gaskets For Type "E" For Full Face FlangesIn this type, the central gasket has its outside diameter as equal to that of flange outside diameter and precision cut bolt holes. This design helps easy alignment of the gaskets during installation. Type "E" gaskets are available in Neoprene faced reinforced Phenolic / Glass Epoxy material or other materials in Table.
  • Goodrich Insulation Gaskets For Type "D" For Ring Joint GasketsIn this type the gaskets are available in fabric reinforced Phenolic or Glass Epoxy. Available in basic "Oval & Octagonal" type. This type has the contact faces with oval shape. It provides a high reliability seal. These gaskets comply with ASME B16.20.

Our company is one of the foremost Manufacturers and Exporters of Monolithic Insulating Joints in the market. We manufacture Monolithic Insulating Joints in accordance with the highest technical standards which guarantee mechanical requirements (torque, traction, bending, etc). These requirements are met for the specific needs of a plant. These Monolithic Insulating Joints are made from the standard quality raw materials. We offer these Monolithic Insulating Joints at the most affordable prices. Technical Details :

• Specific hydraulic internal pressures are maintained
• Insulating requirements are met and surpassed in regard to the electrical characteristics of the product carried in the pipeline
• They are designed according to ASME VIII, Division I

We have facility to do, all non-destructive tests like :

• Hydrostatic Test
• Pneumatic Test
• Radiographic Test
• .Ultrasonic Test
• .Magnetic Particle Test
• Penetrant Test
• High Voltage Breakdown Test
• Electrical Resistance Test

Other Details :

• Customers may specify the tests required and the test values required
• Coating facility is available in house
• Monolithic Insulating joints, 1/2" to 160" diameter, ANSI 150# to 2500#, Gr. B to X70

We are one of the foremost Manufacturers and Exporters of High Tensile Fasteners in the market. The High Tensile Fasteners that we provide are made by using superior quality raw materials. We provide these High Tensile Fasteners at the most affordable price range. Besides, we use state-of-the-art technology like CAD & CAM to manufacture these High Tensile Fasteners. Our company is certified with API-17D to manufacture Studs & Nuts. We are widely known for the ability to produce specialty fasteners to the customer's unique specifications and drawings, providing the client with the highest quality products and customer service available in the industry. We produce in sizes of SAE, ASTM etc. including Bolts, double end, tap end and all thread fasteners in a variety of grades and alloys and coatings. Specifications :

• Hot Forging : Bolts ½ through 4½ diameter
• Sockets ½ through 4½ diameter
• Nuts ½ through 4 ½ diameter (Subject to material grade limitations)
• Threading : Cut threading ½ through 4½ diameter
• Roll threading ½ through 3½ diameter
• CNC Machining ¼½ through 20½ diameter (18½ length maximum)

We also offer a variety of coating systems for fasteners that are specifically selected to meet our customer�s performance specifications. Coating and plating options include :

• .Zinc Plating for Standard Products
• Xylan Coating for Extreme heat & Pressure
• Cadmium Plating & Other special Coating for other applications.

We are one of the foremost Manufacturers and Exporters of Graphite Sheets in the market. The Graphite Sheets that we provide are made by using optimum quality raw material. Graphite Sheet is formed by mechanically sticking flexible Graphite Sheets together with metal plate. Graphite Sheet has good compressibility and resilience, excellent sealing property for microscopic surface irregularities and long working life. Graphite Sheet is mainly used for making cylinder gaskets of engines and punching into all kinds of sealing gaskets. Specifications :

• Length : 1500mm;1000mm;500mm
• Width : 1500mm;1000mm;500mm
• Thicknes : 1.0 to 4.0mm

Available Types :

• Graphite sheet with tanged 0.1mm SS 316 inserted
• Graphite sheet with tanged 0.1mm SS 304 inserted
• Graphite sheet with tanged 0.2-0.25mm carbon steel inserted
• Graphite sheet with flat 0.05mm SS 316 inserted
• Graphite sheet with metal mesh inserted
• Graphite sheet with non-metallic fiber inserted