Our Products
Turning Tools
2 Products availableOur Complete range of products are Automatic Centre Punch, Nail Punches, NUMBER PUNCH & FIGURE PUNCH, NON SPARKING BRASS PUNCHES and hollow punch.
AUTOMATIC CENTRE PUNCH - LIGHT DUTY (BRASS & STEEL)
Fully Hardened and Ground Punch Point. | |
Heavy Knurled Body for definite grip and easy handling. | |
No Hammer is required for operating punch | |
Force of Impact can be regulated by rotating top Knurled cap. | |
5 (125 mm) long with Body Diameter of 5/8 (16 mm) |
NAIL PUNCHES (SQUARE HEAD) | ||
Article No 504 | ||
Made of Tool Steel, Hardened and Tempered | ||
Heavy Knurled Body for better grip | ||
Shiny Black Finish | ||
Handy Tool for Carpenters, Model Makers, Machinists etc. | ||
Available in individual sizes and also in a set of Five in attractive Plastic Pouch |
Article No 504 |
Cat No. | Size of Tip | Length | Square size | |||
Inch | mm | Inch | mm | Inch | mm | |
NPSH-1815 | 1/16 |
1.6 |
4 |
100 |
3/8 |
9.5 |
NPSH-1816 |
3/32 |
2.5 |
4 |
100 |
3/8 |
9.5 |
NPSH-1817 |
1/8 |
3.2 |
4 |
100 |
3/8 |
9.5 |
NPSH-1818 |
5/32 |
4.0 |
4 |
100 |
3/8 |
9.5 |
NPSH-1819 |
3/16 |
4.8 |
4 |
100 |
3/8 |
9.5 |
NPSH-1820 |
Set of above Five Punches in Pouch. |
Used in leather plastic and thin steel sheets | |
Made up from carbon Steel. | |
Available A -Z and 0-9 |
|
||||||||||
Made from high quality Brass Hexagonal Stock | |
Ideal Punches for working in no spark situation | |
Punch Diameters are undersized app. .005 (0.127 mm) | |
3-1/2 (90 mm) Long | |
Available in individual sizes and also in a set of 8 Punches in attractive Plastic Pouch |
Article No 508 |
Cat No. |
Size of Tip |
|
Inch | mm | |
BP-1844 | 1/16 |
1.5 |
BP-1845 | 3/32 |
2.5 |
BP-1846 | 1/8 |
3.0 |
BP-1847 | 5/32 |
4.0 |
BP-1848 | 3/16 |
5.0 |
BP-1849 | 7/32 |
5.5 |
BP-1850 | 1/4 |
6.0 |
BP-1851 |
5/16 |
8.0 |
BP-1852 |
Set of above 8 Brass Punches |
Excellent tool to punch Accurate Hole in gasket Material, light gauge sheet metal, Vinyl, Plastic, Leather, and more | |
Made from hardened & tempered high Carbon Steel | |
Precision Ground edges facilitates easy cutting. | |
Inside taper for clearance | |
Sets are in an attractive Plastic Pouch | |
Also available in individual sizes |
Article No 510 |
Cat No. |
Range |
No. of PCs |
HLP-1855 | 3/16”, 1/4”, 5/16”, 3/8”, 7/16”and ½” |
6 |
HLP-1856 | 3/32”, 1/8”, 5/32”, 3/16”,1/4”,5/16”, 3/8”, 7/16” and 1/2” |
9 |
HLP-1857 | 2mm,, 3mm, 4mm, 5mm, 6mm, 7mm and 8 mm |
7 |
HLP-1858 |
2mm,, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm and 10 mm |
9 |
Made of Tool steel, Hardened and Tempered. Points are Machined and Ground | |
Heavy Knurled Body for better grip | |
Shiny Black finish | |
Available in individual sizes and alsoin a set of five in attractive plastic pouch |
Article No 503 |
Cat No. |
Diameter at Top of Taper |
Length |
||
Inch | mm | Inch | mm | |
CPRH-1809 |
1/16 |
1.6 |
3 |
75 |
CPRH-1810 |
5/64 |
2.0 |
4 |
100 |
CPRH-1811 |
3/32 |
2.5 |
4 |
100 |
CPRH-1812 |
9/64 |
3.6 |
4 |
100 |
CPRH-1813 |
5/32 |
4.0 |
4 |
100 |
CPRH-1814 |
(1.6 mm), 5/64” (2.0 mm), 3/32” (2.4 mm), 9/64” (3.6 mm) and 5/32” (4.0 mm) |
Made up from carbon steel. |
Tip Hardened to HRC 45-52 | |
Punch Section is Centerless ground to check runout. | |
Heavy knurled body with shiny black oxidized finish | |
Body Length 4-1/2 and Pin Length 3-1/2 |
Article No 506 |
Cat No. |
Punch Diameter |
|
Inch |
mm | |
LDP-1827 | 1/8 | 3.0 |
LDP-1828 | 3/16 | 5.0 |
LDP-1829 | 1/4 | 6.0 |
LDP-1830 | 5/16 | 8.0 |
LDP-1831 | 3/8 | 10.0 |
LDP-1832 |
5pc set in inch 1/8" - 3/8" (3mm to 10mm). Available in plastic pouch and bristle packing. |
Heat treated and tempered for long life | ||
Set consists of 28 Punches sizes 3/32 to 1/2 by 64ths plus handy 17/32 size.Length 4-7/8. | ||
1/2" to 1" length 5-1/4" | ||
Diameter .0025 under size to facilitate use | ||
Black Oxide Finish | ||
Comes with aluminum indexed Stand | ||
Ideal Punch set for transferring of threaded, drilled and tapped holes. Very popular with Tool Makers and Machinists | ||
Made of Tool Steel, Hardened and Tempered | |
Points are Machined and Ground | |
Heavy Knurled Body for better Grip | |
Available individually and in Sets |
Article No 502 |
Cat No. | Diameter at top of Taper | Length | Square size | |||
Inch | mm | Inch | mm | Inch | mm | |
CPSH-1803 |
1/16 |
1.6 |
4 |
100 |
3/8 |
9.5 |
CPSH-1804 |
5/64 |
2.0 |
4 |
100 |
3/8 |
9.5 |
CPSH-1805 |
3/32 |
2.5 |
4 |
100 |
3/8 |
9.5 |
CPSH-1806 |
9/64 |
3.6 |
4 |
100 |
3/8 |
9.5 |
CPSH-1807 |
5/32 |
4.0 |
4 |
100 |
3/8 |
9.5 |
CPSH-1808 |
Set of Five above sizes of Center Punches in Pouch. |
Hardened and Tempered Tool Steel for long life | |
Shiny Black oxidized finish | |
Heavy Knurled Body for better Grip. | |
Very Handy Tool for Carpenters, Model Makers, Machinists, Pattern Makers, etc |
Article No 505 |
Cat No. | Size of Tip | Length | ||
Inch | mm | Inch | mm | |
NPRH-1821 | 1/16 |
1.6 |
4 |
100 |
NPRH-1822 | 3/32 |
2.5 |
4 |
100 |
NPRH-1823 | 1/8 |
3.2 |
4 |
100 |
NPRH-1824 | 5/32 |
4.0 |
4 |
100 |
NPRH-1825 | 3/16 |
4.8 |
4 |
100 |
NPRH-1826 | Set of 5 above mentioned Nail Punches in a attractive Plastic Pouch |