Our Products
Hardened and Ground steel body | |
Spring Tension Knurled nut for easy depth measurement and locking. | |
Fitted with stainless steel Rule graduated 64th on one side and 0.5 mm on reverse | |
Rule measures 7/32" (5.5 mm) wide and .041" (1.05 mm) thick. |
Graduated from 0 - 180 | |
Spring Tension nut to secure rule to desired depth and angle. | |
Narrow 6" (150mm) rule graduated 64th on one side and 0.5 mm at reverse. | |
Made out of stainless steel | |
Gauges are surface ground | |
Permanently deep edged graduation |
For twist drills with acute angle of 118 up to 2" (50 mm) diameter. | |
Made from Stainless Steel | |
Cat No. | Overall Length | |
Inch | mm | |
TDG-313 | 4-1/2 | 114 |
Very handy gauge to quickly determine the Pitch of Various threads. | |
Made of High Quality Polished Tool Steel. | |
Features a Locking Device at both ends to securely lock the leaves. | |
All leaves clearly marked with size | |
Comes in a plastic Pouch. |
Feelers Gauges have hardened & polished taper blades, enclosed in a steel case for safe pocket stroge. The Blades are clearly marked for easy identification. |
Article No :- 141 |
Cat No. | No of Leaves | Length |
Range |
|
FG-325 | 9 | 4" | .002"- .015" | .05 - .60 mm |
FG-326 | 10 | 4" | .0015"- .025" | .05 - .80 mm |
FG-327 | 13 | 4" | .002" - .035" | .05 - 1 mm |
FG-328 | 26 | 4" | .0015"- .025" | .03 - 1 mm |
Handy device for checking radii of tools and dies easier and faster. | |
Gage features leaves for measuring both concave and convex radii. | |
Each leaf is clearly stamped with the radius size |
Article No :- 138- 139 |
Cat No. |
Range |
No of Leaves |
RG-315 |
1/32 to 1/4 by 1/64” |
30 |
RG-316 |
17/64 to 1/2 by 1/64” |
32 |
RG-317 |
1 to 7 mm |
34 |
RG-318 |
7.5 to 15 mm |
32 |
RG-319 |
15.5 to 25 mm |
30 |
RG-320 |
0.75 to 5 mm |
18 |
RG-321 |
5.5 to 13 mm |
16 |
Graduations are engraved for permanent use | |
Used for measuring cylindrical bores. |
We are the Manufacturers & exporters of a wide variety of "Gauges". Some of the standard Gauges are: | ||
Art 131 | BORE GAUGE | |
Art 132 | WIRE GAUGE- RECTANGULAR & ROUND | |
Art 133 | WIRE GAUGE- ROUND | |
Ar 134 | THREAD CUTTING GAUGE | |
Art 135 | CENTER GAUGE | |
Art 136 | TWIST DRILL GRINDING GAUGE | |
Art 137 | UNIVERSAL GRINDING GAUGE | |
Art 138 | RADIUS GAUGE | |
Art 139 | RADIUS GAUGE KEY RING TYPE | |
Art 140 | DIAMOND THICKNESS GAUGE | |
Art 141 | FEELER GAUGES | |
Art 142 | DRILL GAUGE (CARBON STEEL) | |
Art 143 | DRILL GAUGE (ALUMINUM) | |
Art 144 | ROUND BAR CENTER FINDER | |
Very Handy Gauge used in grinding and setting screw cutting tools. | |
Made of tempered stainless steel | |
Clearly etched Scale for finding number of threads per Inch through graduations in 14ths, 20ths, 24ths and 32ths of an inch. | |
Gauge also features a table of double depth of thread for determining size of tap drills |
Cat No | Description |
CG-311 |
American Unified National Standard 60° |
CG-312 |
Whitworth or English Standard 55° |
Made out of stainless steel | |
Gauges are surface ground | |
Permanently deep edged graduation |