Golden Electronics

Vedvyas, Rourkela, Odisha

Features :

• Din sized enclosure for Track (Din rail) / Screw mounting.
• B1DCA-T : HOLD / RESTART facility during power fail conditions.
• B1DCA-T : Auto / Manual switch for mode of operation
• B1DCA-T : Program - enable / disable facility for tamper proof operation.
• B1DCA-X, B1DCA-T : Independently selectable ON & OFF time.
• SPP-T :Trips under phase missing, phase reversal or phase unbalance
• In manual mode, terminals provided to connect to switch so as to manually switch ON and switch OFF load

Applications : Lubricating system, DG Sets, MCC panels, Pump panels and many more.

Dimensions : Over-all: 45 X 75 X 116mm (W X H X D).

Features :

• LED indication for timing in progress
• Front protective cover for safety.
• Timer and base available for Track(except H3D1).
• Large transparent knob with lock is provided for precise time setting and protect from unintentional change of time setting.
• H1DA-X : Accepts any voltage from 12V AC/DC to 240V AC / 220V DC as signal between command contacts for timing initiation.
• H1D1-X, H3D1: Multifunction-On-Delay / Interval / Equal Cyclic-On / Equal Cyclic-Off programmable.

Applications : Textile machines, Vending machines and many more.

Dimensions :

• Over-all: 45 X 75 X 116mm (W X H X D).
• Cut-out: 46 X 46mm (W x H)

Features :

• Din Sized enclosure for panel mounting.
• Digital dual display for set value and process value.
• FUNCTION (programmable): ON DELAY / INTERVAL /CYCLIC ADJUSTABLE.
• TYPE OF START SIGNAL (programable) : NO START / PULSE / CONTINUOUS.
• One of the relay c/o can be configured as INSTANT or DELAYED.
• Program lock is provided for function, relay configuration, type of start signal and range selected.
• RESET cum START facility can be achieved either through front buttons Or Rear terminals
• HOLD/RESTART facility during power failure conditions.
• Internal Resettable fuse for protection of device against voltage fluctuations(N.A. for H3PT-MU). Digital display will blink whenever voltage exceeds specified voltage range. Switch off the unit for sometime & then switch on when voltage returns to normal

Dimensions :

• Over-all: H3PT-MU – 48 x 48 x 95.5mm, C3PT-MU , E3PT-MU – 96 x 96 x 117mm (W x H X D)
• Cut-out: H3PT-MU – 46 x 46 mm, C3PT-MU, E3PT-MU – 92 x 92mm (W x H)

ApplicationsInjection moulding machine panels, Granite processing machines, Packaging / Printing machines, Hot stamping machines etc.

Features :

• Suitable for screw mounting(except ST4-M1).
• 7 segment display indication for channel and timing operation (except ST-4M1).
• User friendly programming for ON/OFF time selection independently (except ST-4M1).
• Hold /Restart feature is available during power failure, Over voltage protection(except ST-4M1).
• ST-6M1 / ST-10M2 / ST-10M1 : pulse start signal.
• ST-15M2 / ST-4M1 : continuous start signal.
• S1D-C8M3 : Comprises of 8 Relays and each relay can be programmed for maximum of 8 switchings in a cycle.
• Potential free (Zero volts) continuous start signal and continuous signal from differential pressure switch is mandatory for operating the timer (Only in model ST-15M2)
• Feedback outputs for timer healthy, timing in progress and power healthy available in model ST-6M2

Dimensions :

• Over-all: ST6-M1 / ST6-M2 / ST10-M2 / ST15-M2 / S1DC8-M3 – 200 x130 x 45mm
• ST4-M1: 110 x 86 x 68mm (W x H x D)
• ST10-M1 (IP) / ST10-M2 (IP) / ST6-M1 (IP) / ST6-M2 / ST15-M2 – 291 x 214 x 82mm (W x H x D)

ApplicationsBag Filter systems, dust pollution systems, Air handling systems, MCC panels, conveyors, process industries, nitrogen and other gas plants, sewage water treatment plants, irrigation spraying systems and many more.

Features :

• Aux. supply - wide voltage and frequency range.
• Compactable baud rate - 2400, 4800, 9600, 19200.
• Max. no of nodes - 32.
• Max. cable length (RS-232 side) - 15mtrs typical.
• Max. cable length (RS-485 side) - 1000mtrs typical.
• Mounting - Din-rail.
• LED indication for power, Receiving and Transmitting signals

Dimensions : Overall: 117 x 86 x 61mm (W x H x D)

Applications : Converts RS485 to RS232

Features :

• Micro Controller based 3 Channel DC Energy Meter
• Displays DC parameters V, I, KW, KWh , MWh& Load on hours of all three channels.
• Displays the latest reading of all the cleared energies and load on hours.
• Display Hold / Scroll Facility available.
• Programmable Shunt ratios.
• Alphanumeric display for Parameter & values
• RS-485 serial port with Modbus RTU output.
• Wide Input Voltage and Current Range.
• Protection from dust and water as per IP-51.

Dimensions :

• Overall:96 x 96 x 117mm (W x H x D)
• Cutout: 92 x 92mm(W x H)

ApplicationsDC rectifier systems, Battery panels, DC distribution solar panels, DC loads, DC motors.

Features :

• Microcontroller based multifunction AC Energy Meter.
• Accuracy Class1.0 / (Class 0.5 calibration on Request).
• CT /PT (Pri/Sec) Programmable.
• Digital Measurement.
• IEC 62052-11 IEC 62053-21 IEC 62053-22 IEC 62053-23.
• RS 485 Serial Port with Modbus RTU Output.
• Flush / Panel Mounting.
• 96 x 96 mm DIN Mounting.
• Auto Scroll / Hold Facility.
• Internal Resettable fuse for protection of device against voltage fluctuations.
• Protection from dust and water as per IP-51.

Dimensions :

• Overall: 96 * 96 * 95.5mm (W x H x D)
• Cut-out: 92 * 92mm (W x H)

ApplicationsSub metering panels, Distribution Panels, HT/ LT panels, DG panels etc.

Features :

• Measurement of basic, power, energy and demand parameters.
• On-site programmable PT and CT ratios.
• High brightness LED display (alpha numeric for parameter, numeric for value).
• Automatic CT reverse correction for energy and demand.
• Programmable demand techniques : block / sliding window.
• Programmable demand parameters : Apparent / Active power.
• Programmable demand range : Kilo / Mega.
• Programmable Alarm / hysterisis settings.
• Program RTC time to match EB meter's clock.
• For EMS-15C : Max. Demand Controller = Max. demand indicator + Relay module (4 relay) (RR-4).
• 4 control outputs for alarm and trip settings.

Dimensions :

• Overall : EMS 15, EMS 15C 96 x 96 x 117mm (W x H x D)
• RR-4 : 195x90x59mm(WxHxD) Cutout: 92 x 92mm(W x H)

Applications : In-comer distribution panels

Features :

• Universal Input (J, K, PT-100) Selectable.
• Wide Voltage Range.
• ON / OFF or Self-Tuned Function Selectable.
• Single / double set point.
• Over Voltage Protection
• LED Indication for sensor selected, function and relay status
• Program enable / disable for sensor, function, hystersis, compensation features in TX7-Ua

Dimensions :

• Overall : 48 x 48 x 95.5mm, TX7 Models- 72 X 72 X 128mm; EX9 Models- 96 x 96 x 117mm (W x H X D)
• Cut-out : H3-TX Models – 46 x 46mm, TX7 Models - 69 x 69mm , EX9 Models – 92 x 92mm (W x H)

ApplicationsAny 3 phase 4wire systems like Motors, pumps, generators, Distribution panels, MCC, air conditioners, elevators, cranes and escalators etc.

Features :

• Front button for resetting in manual mode
• External potential free (zero volt /no voltage) terminal contacts for auto mode.
• LED indication for relay status
• Window displays the type of fault that has occurred during unhealthy condition
• Trip delay time and limits for each parameter can be set digitally
• All programs can be locked by removing short link across specified terminals
• Unwanted parameters can be by-passed as per user's choice.
• Relay can be configured to have NO or NC status during healthy condition
• Unit will retain fault till accepted in manual mode
• PVMD, PVMD-G : Monitors and trips the circuit after the set trip delay time when ever power unhealthiness (phase failure, phase sequence, phase unbalance under voltage or over voltage) occurs.
• Displays all the 3 phase voltages in a scrolling fashion during healthy condition.
• PVMD – Panel / Flush mounting, PVMD-G Din Rail mounting
• PVIMD, PVIMD-G : Monitors and trips the circuit after the set trip delay time when ever power unhealthiness (phase failure, phase sequence, phase unbalance under voltage, over voltage, under current or over current)
• Displays all the 3 phase voltages and 3 phase currents in a scrolling fashion during healthy condition.
• User can program nominal current. Under current and over current limits can be set in percentage with reference to nominal current.
• User can set the in-rush time delay.
• Terminals to connect all the 3 phase CTs are provided.
• CT primary can be programmed up to 500 in steps of 5. CT secondary will be factory set for 5
• PVIMD – Panel / Flush mounting. PVIMD-G - Din Rail mounting
• Din sized enclosure with Auto / manual Switch

Dimensions :

• Overall : PVMD, PVIMD– 96 x 96 x 97.5mm, PVMD-G, PVIMD-G, – 76 x 78 x 115mm (W x H x D)
• Cut-out : PVMD, PVIMD– 92 x 92mm (W x H)

Applications : Any 3 phase 4wire systems like Motors, pumps, generators, Distribution panels, MCC, air conditioners, elevators, cranes, escalators

Features :

• Switches On and Off 4 times in a day with respect to real time.
• LED indication for relay status, LCD display for real time clock.
• User friendly programming with manual over ride facility.
• Clock hour and Clock minute buttons can be enabled by shorting terminals to program RTC.
• For TS-203, TS-203B : Use (1.5Vx2)AA size Batteries
• For TS-203R : Built in Rechargeable Battery

Dimensions :

• TS-203 :Over-all:72 x 72 x 84mm (W x H x D)
• TS-203B : Over-all:110 x 86 x 68mm (L x W x D)

Applications : Street lightings, advertising sign boards etc.

Features :

• Compact, light weight and SMPS design
• Versatile and easy snap-on mounting on Din-rail
• Very low ripple and noise
• Regulated and adjusted output
• Protection against over voltage, short circuit and over load.

Dimensions :

• Overall : MS-01 - 45 x 75 x 116mm, MS-02 – 110 x 86 x 71mm
• MS-03 - 155 x 88 x 79mm
• MS-04 - 172x150x78mm MS-05 – 22.5 x 75 x 97mm (W x H x D)

Applications : PLC, DC Panels, DC Solenoids, DC Relay boards, Battery Charging Panels.

Features :

• Micro-controller based design with world class Indian software.
• Non-contact sensing through reflected light beam on reflective sticker.
• LCD display
• Input sensing indication through LED.
• Memory facility to retain measured value.
• Portable, lightweight, strong and elegant ABS enclosure.
• Accuracy: 1RPM up to 5, 000 RPM and 0.05% of the reading above 5, 000 RPM.
• Resolution: 0.1RPM up to 5, 999 RPM and 1RPM at and above 6, 000RPM.
• Calibration certificate provided along with tachometer - traceable to national and international standards.

Dimensions : Over-all: 72 X 170 X 38mm (W X H X D).

Applications : Motors, Pumps, Generators, Engines and many more.

Features :

• Din sized enclosure for panel mounting.
• Wide Voltage range
• Front / Rear reset facility provided.
• Hold / Restart options (selectable) during power failure.
• Input signal from proximity switch ( NPN / PNP type) or Potential free (zero volt) signal from limit switch, relay o/p etc
• Over-voltage protection
• CT-5: Digital, single window 5 digit 7 segment red LED display with up counting for process value.
• Preset Counts can be programmed with the help of thumbwheel switch
• H3CT-5U : Digital, single window 5 digit 7 segment red LED display with up counting for both process value and set value
• Input sensitivity – programmable (1-100Hz)
• Internal Resettable fuse for protection of device against voltage fluctuations. Digital display will blink whenever voltage exceeds specified voltage range. Switch off the unit for sometime & then switch on when voltage returns to normal.

Dimensions : Overall: CT-5 – 72 x 72 x 128mm, H3CT-5U – 48 x 48 x 115mm (W x H x D)

Applications : Paper board counting, bag counting, bottle counting, relay change over counting, breaker panels, stroke counting in granite cutting m/c and many more.

Features :

• Sleek, light weight, ABS enclosure
• Super bright, White color SMD, LED for fault indications
• Test / Mute / Acknowledge / Reset (buttons in front and terminals at rear) are available.
• Multiple units terminals can be connected in parallel to achieve more windows
• Each window can be programmed for fault inputs as NO or NC and output as alarm or trip
• Windows with different colours (Red, Green, Amber and White) can be supplied on request.
• Above program can be locked by removing the short link across specified terminals

Dimensions :

• Overall: M2-12, M2-16, M2-20, M2-24: 291 x 186.5 x 79mm (W x H x D)
• Cut-out: M2-12, M2-16, M2-20, M2-24: 285 x 181mm(W x H)

ApplicationsC & R panels, Transformer panels, DG set panels, Fire annunciation panels and Instrumentation panels etc.

Features :

• Battery operated (2nos x 1.5V DC, AA size) Real Time Clock in 24 hour format.
• Switches On and Off 4 times in a day with respect to real time

Dimensions : 110 X 86 X 68mm

Applications :  ATM air conditioners

Features :

• High brightness red LED display
• On site programmable CT(pri &sec) ratio
• Protection from dust and water as per IP-51 for front facia
• Measurement of basic parameters
• Program enable /disable facility available
• EMS-11: Measurement of current parameters (L-N) *CT primary and secondary programmable.
• EMS-12: Measurement of voltage parameters *PT primary and secondary programmable.
• EMS-13: Measurement of frequency parameter.
• EMS-14: Measurement of Power Factor parameter.
• EMS-18: VAF Meter with True RMS Sensing
• EMS-18: Measurement of basic parameters.(Current (L-N), Voltage (L-N), (L-L), frequency (average) and Power factor (Total) * CT ratio programmable, RS485 Mod-bus RTU protocol available, Sensing : True RMS.
• Hold/Scroll Facility available.

Dimensions :

• For EMS-11, EMS-12, EMS-13, EMS-14 Overall: 96 x 96 x 97.5mm (W x H x D) * Cutout : 92 x 92mm (W x H)
• For EMS-02, EMS-18 Overall: 96 x 96 x 117 mm (W x H x D) * Cutout : 92 x 92mm (W x H)

ApplicationsSub metering, machines, Panels, power analysis systems etc.

Features :

• Front button for resetting in manual mode
• External potential free (zero volt /no voltage) terminal contacts for auto mode.
• LED indication for relay status
• Window displays the type of fault that has occurred during unhealthy condition
• Trip delay time and limits for each parameter can be set digitally
• All programs can be locked by removing short link across specified terminals
• Unwanted parameters can be by-passed as per user's choice.
• Relay can be configured to have NO or NC status during healthy condition
• Unit will retain fault till accepted in manual mode
• PVMD, PVMD-G : Monitors and trips the circuit after the set trip delay time when ever power unhealthiness (phase failure, phase sequence, phase unbalance under voltage or over voltage) occurs.
• Displays all the 3 phase voltages in a scrolling fashion during healthy condition.
• PVMD – Panel / Flush mounting, PVMD-G Din Rail mounting
• PVIMD, PVIMD-G : Monitors and trips the circuit after the set trip delay time when ever power unhealthiness (phase failure, phase sequence, phase unbalance under voltage, over voltage, under current or over current)
• Displays all the 3 phase voltages and 3 phase currents in a scrolling fashion during healthy condition.
• User can program nominal current. Under current and over current limits can be set in percentage with reference to nominal current.
• User can set the in-rush time delay.
• Terminals to connect all the 3 phase CTs are provided.
• CT primary can be programmed up to 500 in steps of 5. CT secondary will be factory set for 5
• PVIMD – Panel / Flush mounting. PVIMD-G - Din Rail mounting
• Din sized enclosure with Auto / manual Switch

Dimensions :

• Overall : PVMD, PVIMD– 96 x 96 x 97.5mm, PVMD-G, PVIMD-G, – 76 x 78 x 115mm (W x H x D)
• Cut-out : PVMD, PVIMD– 92 x 92mm (W x H)

Applications : Any 3 phase 4wire systems like Motors, pumps, generators, Distribution panels, MCC, air conditioners, elevators, cranes, escalators

Features :

• 31/2 digit, 7segment LED temperature display
• Wide voltage range (85-270V AC / DC)
• Universal input (J / K / PT-100)
• LED indication for sensor, funtion & relay status.
• Sensor and function lock.
• Dual function (On / Off or Self tuned).
• Single set point with relay output.
• Over voltage protection.
• H3TX-Ua / TX7-Ua / EX9-Ua/H3TX-U-RS : Single display for both process and set value.
• Temperature offset calibration user settable
• Single set point with relay output
• H3TX-2U / TX7-2U / EX9-2U : Dual display for process and set value.

Dimensions :

• Overall : H3TX Models 48 x 48 x 95.5mm, TX7 Models- 72 X 72 X 128mm; EX9 Models- 96 x 96 x 117mm (W x H X D)
• Cut-out : H3-TX Models – 46 x 46mm, TX7 Models - 69 x 69mm , EX9 Models – 92 x 92mm (W x H)

Applications : Furnace, Heat treatment equipment, Ovens, Boilers, Plastic and Rubber machinery and many more.

Features :

• Designed for the control of cotton level in laminae duct in ERM cleaners.
• Designed for Industrial Environment
• High Intensity pulsed Infra Red Emitter
• Time Delay up to 20 Seconds.
• Highly immune to Ambient Light
• 45mm Din Rail mounting.

Dimensions : Overall:45 x 75 x 116mm (W x H x D)

Applications : Designed for control of cotton level in laminae duct in ERM cleaners and similar application.

Features :

• Din sized enclosure
• Front button and external potential free (Zero volt/no voltage) terminal contacts for resetting in manual mode.
• LED indication for power , relay status and fault condition.
• *Trip delay time and limits of all parameters are factory set.
• PMD-02, PMD-03: Monitors phase sequence, phase failure, and under voltage in a 3phase, 3wire system and trips under such conditions.
• SPP-T: Monitors phase sequence, phase failure and phase unbalance in a 3phase, 3wire system and trips under such conditions.

Dimensions :

• PMD-01 Over all : 45x75x116mm(WxHxD)
• PMD-02 Over all : 22.5x75x102mm (W x H x D)

ApplicationsMotors, pumps, generators and Compressor panels etc.

Features :

• Sleek, light weight, ABS enclosure
• Super bright, White color SMD, LED for fault indications
• Test / Mute / Acknowledge / Reset (buttons in front and terminals at rear) are available.
• Multiple units terminals can be connected in parallel to achieve more windows
• Each window can be programmed for fault inputs as NO or NC and output as alarm or trip
• Above program can be locked by removing the short link across specified terminals
• Available in 2, 4, 6 and 8 windows respectively
• Available in wide auxiliary voltage ranges of 18V to 90V AC/DC and 85V to 270V AC/DC
• Manual RESET and Auto RESET facility available
• Windows with different colours (Red, Green, Amber and White) can be supplied on request.
• Window size M2-4 – 66 x 27.5mm, M2-6 – Top 2 windows – 66 x 27.5mm, Bottom 4 windows – 31.5 x 27.5mm, M2-8 – 31.5 x 27.5mm (W x H)

Dimensions :

• Overall:M2-4, M2-6, M2-8: 73.5 x 142.5 x 78 mm (W x H x D)
• Cut-out: M2-4, M2-6, M2-8: 69 x 141 mm (W x H)

ApplicationsC & R panels, Transformer panels, DG set panels, Fire annunciation panels and Instrumentation panels and many more.

Features :

• Sleek, light weight, ABS enclosure
• Super bright, White color SMD, LED for fault indications
• Test / Mute / Acknowledge / Reset (buttons in front and terminals at rear) are available.
• Multiple units terminals can be connected in parallel to achieve more windows
• Each window can be programmed for fault inputs as NO or NC and output as alarm or trip
• Above program can be locked by removing the short link across specified terminals
• Available in 2, 4, 6 and 8 windows respectively
• Available in wide auxiliary voltage ranges of 18V to 90V AC/DC and 85V to 270V AC/DC
• Manual RESET and Auto RESET facility available
• Windows with different colours (Red, Green, Amber and White) can be supplied on request.

Dimensions :

• Overall:M2-4, M2-6, M2-8: 73.5 x 142.5 x 78 mm (W x H x D)
• Cut-out: M2-4, M2-6, M2-8: 69 x 141 mm (W x H)

ApplicationsC & R panels, Transformer panels, DG set panels, Fire annunciation panels and Instrumentation panels and many more.

Features :

• This is a light switch working on direct or reflective transmission principle.
• It consists of high intensity emitter source and high sensitive receiver
• The signal received from the receiver will operate a relay with ON delay or OFF delay depending on mode selected.
• The time range can be 0.3 sec / 30 sec.

Dimensions :

• EALS-4505 Dimension:45 x 75 x 116mm(WxHxD)
• EALSR-01:19.2 x 35.5 x 127.5mm (W x H x D)
• EALSE-01:19.2 x 35.5 x 127.5mm (W x H x D)

Applications : Hopper Feed Control, Stop Motion Device, Light Barriers, Level Control, Intrusion Alarm.

Features :

• Sleek, light weight, ABS enclosure
• Super bright, Red color SMD, LED for fault indications
• Test / Mute / Acknowledge / Reset (buttons in front and terminals at rear) are available.
• Multiple units terminals can be connected in parallel to achieve more windows
• Each window can be programmed for fault inputs as NO or NC and output as alarm or trip
• Windows with different colours (Red, Green, Amber and White) can be supplied on request.
• Above program can be locked by removing the short link across specified terminals
• Available in wide auxiliary voltage range of 85V to 270V AC / DC

Dimensions :

• Overall: M2-12, M2-16, M2-20, M2-24: 291 x 187 x 79mm (W x H x D)
• Cut-out: M2-12, M2-16, M2-20, M2-24: 285 x 181mm(W x H)

ApplicationsC & R panels, Transformer panels, DG set panels, Fire annunciation panels and Instrumentation panels etc.