Write a Review
Our Products
Industrial Coupler
2 Products availableOur Complete range of products are PP Foot Valve, Bore Foot Valve, PP Float Valve, PVC Flush Valve and Air Valve.
Supplier of PP Float Valve.
PVC Flush Valveis particularly designed using best material and thereby ensures optimum quality. In order to meet diverse requirements of clients we offer the assortment of valve in a variety of specifications in terms of sizes, designs finishes and other associated details. The offered range is highly demanded in the market for its excellent durability and robust design. Further, we offer this type of valve to our precious clients at market leading prices.
Air valvesare used in pipeline system to serve two initial functions. First is release of accumulated air that comes out of solution in a pressurized pipe line. Its function to release air pockets that collect at each high point of a full pressured pipe line. It can open against internal pressure because of its mechanism multiplies the float force greater than internal pressure.
The other function of theAir Valveis to allow air in the system when the internal pressure of pipeline below atmospheric pressure.Air plays a very important role in liquid flow in pipelines and in liquid conveyance and treatment systems in general.These valves are globally known as best valuable airflow control tools for liquid conveyance system. Our valves are highly acceptable for their durability and quality and we offer best quality products to admired clients.
|
| Material Of Construction | PP (Polypropylene) / HDPE(Highdensitypolyethylene) / PVDF(Polyvinylidene fluoride) | Construction | 3 piece design, 1 piece stem (spindle), full bore, Teflon seated |
| Design | 3 piece design | Test pressure | 08 kg./cm2 |
| Max working temp | 70 c (consistently) | Size Range | ½" 15MM TO 12’’-315MM |
| Connection End | Flanged as per ANSI B 16.5 (150#) &BS 10 (Table D/E/F) & DIN STD. | Standard | As per manufacturers |
| Material Specification | |||
| No. | DESCRIPTION | QTY. | MATERIAL |
| 1) | Flanged end | 2 | PP / HDPE & PVDF |
| 2) | Body | 1 | PP / HDPE & PVDF |
| 3) | Ball | 1 | PP & PVDF |
| 4) | Stem/Spindal | 1 | Polypropylene With M.S. /S.S |
| 5) | Seat Ring | 2 | PTFE (TEFLON) |
| 6) | Body"O"Ring | 2 | Neoprene |
| 7) | Stem Seal Ring | 1 | PTFE (TEFLON) |
| 8) | Stem "O" Ring | 1 | Neoprene |
| 9) | Stud, Nut & Washer | REQ | M.S. Zinc Plated/S.S |
| 10) | Nut Cap | REQ | Polypropylene. |
| 11) | Handle | 1 | M.S. PP Coated. |
| 12) | Handle Hex. Pin | 1 | M.S./ S.S. |
| 13) | Handle Cap | 1 | Polypropylene. |
| Size | L | T | OD | ID | H1 | H | |
| In. | MM | ||||||
| 1/2" | 15MM | 129 | 12.5 | 100 | 13.5 | 130 | 69 |
| 3/4" | 20MM | 142 | 14 | 101 | 19 | 131 | 75 |
| 1" | 25MM | 160 | 20 | 123 | 24 | 165 | 89 |
| 1 1/2" | 40MM | 182 | 20 | 140 | 38 | 197 | 109 |
| 2" | 50MM | 208 | 22 | 165 | 50 | 200 | 121 |
| 2 1/2" | 65MM | 230 | 25 | 185 | 63 | 255 | 144 |
| 3" | 80MM | 251 | 25 | 201 | 75 | 255 | 150 |
| 4" | 100MM | 302 | 28 | 228 | 100 | 350 | 182 |
| 6" | 150MM | 428 | 30 | 300 | 150 | - | 236 |
| 8" | 200MM | 505 | 32 | 360 | 201 | - | 325 |
| 10" | 250MM | 570 | 34 | 425 | 242 | - | 310 |
| 12" | 315MM | 590 | 35 | 487 | 300 | - | 309 |
|
| Material Of Construction | PP (Polypropylene) | Construction | 3 piece design, 1 piece stem (spindle), full bore, Teflon seated |
| Design | 3 piece design | Test pressure | 08 kg./cm2 |
| Max working temp | 70 c (consistently) | Size Range | ½"- 15MM TO 100MM- 4” |
| Connection End | Screw end (BSP thread) | Standard | As per manufacturer |
| Material Specification | |||
| NO. | DESCRIPTION | QTY. | MATERIAL |
| 1) | Flanged end | 2 | Polypropylene |
| 2) | Body | 1 | Polypropylene |
| 3) | Ball | 1 | Polypropylene |
| 4) | Stem/Spindal | 1 | Polypropylene With M.S. /S.S |
| 5) | Seat Ring | 2 | PTFE (TEFLON) |
| 6) | Body"O"Ring | 2 | Neoprene |
| 7) | Stem Seal Ring | 1 | PTFE (TEFLON) |
| 8) | Stem "O" Ring | 1 | Neoprene |
| 9) | Stud, Nut & Washer | REQ | M.S. Zinc Plated/S.S |
| 10) | Nut Cap | REQ | Polypropylene. |
| 11) | Handle | 1 | M.S. PP Coated. |
| 12) | Handle Hex. Pin | 1 | M.S./ S.S. |
| 13) | Handle Cap | 1 | Polypropylene. |
| Size | L | OD | ID | H1 | |
| In. | MM | ||||
| 1/2" | 15MM | 115 | 30 | 13.5 | 130 |
| 3/4" | 20MM | 126 | 35 | 19 | 131 |
| 1" | 25MM | 123 | 45 | 24.5 | 165 |
| 1 1/2" | 40MM | 154 | 65 | 38 | 197 |
| 2" | 50MM | 178 | 76 | 50 | 200 |
| 2 1/2" | 65MM | 206 | 94 | 63.5 | 255 |
| 3" | 80MM | 222 | 107 | 75 | 255 |
| 4" | 100MM | 273 | 134 | 100 | 350 |
ThePP Three Piece Flange End Ball Valveis utilized for controlling the flow of liquefied and gaseous materials through a pipeline. This valve range is made sturdily by making use of premium grade polypropylene in adherence with the international quality norms.
The Teflon seated valve contains three piece design, one piece stem or spindle and a full bore. To suffice the material regulating requirements in divergent industries, this valve is provided with flange connection end according to ANSI B 16.5 (150#) &BS 10 (Table D/E/F) & DIN/STD.
| Material Of Construction | Polypropylene (PP) | Construction | 3 piece design, 1 piece stem (spindle), full bore, Teflon seated |
| Design | 3 piece design | Test pressure | 08 kg./cm2 |
| Max working temp | 60 c (consistently) | Size Range | ½" 15MM TO 6”-150MM |
| Connection End | Flanged as per ANSI B 16.5 (150#) & BS 10 (Table D/E/F) & DIN STD. | Standard | As per manufacturer |
| Material Specification | |||
| No. | DESCRIPTION | QTY. | MATERIAL |
| 1) | Flanged end | 2 | PP |
| 2) | Body | 1 | PP |
| 3) | Ball | 1 | PP |
| 4) | Stem/Spindal | 1 | Polypropylene With M.S. /S.S |
| 5) | Seat Ring | 2 | PTFE (TEFLON) |
| 6) | Body"O"Ring | 2 | Neoprene |
| 7) | Stem Seal Ring | 1 | PTFE (TEFLON) |
| 8) | Stem "O" Ring | 1 | Neoprene |
| 9) | Stud, Nut & Washer | REQ | M.S. Zinc Plated/S.S |
| 10) | Nut Cap | REQ | Polypropylene. |
| 11) | Handle | 1 | M.S. PP Coated. |
| 12) | Handle Hex. Pin | 1 | M.S./ S.S. |
| 13) | Handle Cap | 1 | Polypropylene. |
| Size | L | T | OD | ID | H1 | H | |
| In. | MM | ||||||
| 1/2" | 15MM | 129 | 12.5 | 100 | 13.5 | 130 | 69 |
| 3/4" | 20MM | 142 | 14 | 101 | 19 | 131 | 75 |
| 1" | 25MM | 160 | 20 | 123 | 24 | 165 | 89 |
| 1 1/2" | 40MM | 182 | 20 | 140 | 38 | 197 | 109 |
| 2" | 50MM | 208 | 22 | 165 | 50 | 200 | 121 |
| 2 1/2" | 65MM | 230 | 25 | 185 | 63 | 255 | 144 |
| 3" | 80MM | 251 | 25 | 201 | 75 | 255 | 150 |
| 4" | 100MM | 302 | 28 | 228 | 100 | 350 | 182 |
| 6" | 150MM | 428 | 30 | 300 | 150 | - | 236 |
Single Piece Ball Valvesare designed for flawless discharge control in industrial pipe and hose fitting systems. These valves are stringently tested on various quality parameters and are available in various sizes, shapes, dimensions and connection ends as per the requirement of our clients.
| Features |
|
| Used for controlling flow of |
|
| Construction | Multi Piece Body | Design | Top Entry |
| Test pressure | 08 kg | Max working temp | 60 c (consistently) |
| Size Range | 25MM to 80MM | Connection End | Solid Seal screw / Plain and Ball Valve |
| Standard | As per requirement |
|
| Material Of Construction | PP (Polypropylene) | Construction | One piece body |
| Design | Waffer dise design | Test pressure | 10kg upto 4”– 6kg above 4” |
| Max working temp | 70 c (consistently) | Size Range | 2’-50MM TO 12’’-315MM |
| Connection End | Flanged as per ANSI B 16.5 (150#) | Standard | As per manufacturer |
| Material Specification | |||
| No. | DESCRIPTION | MATERIAL | QTY. |
| 1) | Body | Polypropylene | 1 |
| 2) | Disk | Polypropylene | 1 |
| 3) | Stem "O" Ring. | Neoprene Rubber | 2 |
| 4) | Stem | S.S. | 1 |
| 5) | Hinge pin | S.S. | 1 |
| 6) | Cap | S.S. | 1 |
| 7) | Hundle | Polypropylene | 1 |
| 8) | Spring | S.S. | 1 |
| 9) | Hundle pin | S.S. | 1 |
| 10) | Positioner lever | S.S. | 1 |
| 11) | Handle cap | Polypropylene | 1 |
| 12) | Positioner plater | S.S. | 1 |
| Size | L | T | OD | ID | H1 | H | |
| In. | MM | ||||||
| 2" | 50MM | 215 | 43 | 159 | 53 | 168 | 242 |
| 2 1/2" | 65MM | 215 | 43 | 183 | 66 | 180 | 268 |
| 3" | 80MM | 215 | 43 | 198 | 80 | 186 | 284 |
| 4" | 100MM | 215 | 43 | 228 | 103 | 201 | 310 |
| 6" | 150MM | 272 | 60 | 210 | 153 | 255 | 375 |
| 8" | 200MM | 272 | 61 | 262 | 201 | 287 | 330 |
| 10" | 250MM | 272 | 61 | 262 | 201 | 287 | 330 |
| 12" | 315MM | 272 | 61 | 262 | 201 | 287 | 330 |
|
| Material Of Construction | PP (Polypropylene) | Construction | 3 piece design, full bore, Teflon seated, borosil glass |
| Design | 3 piece design | Test pressure | 8kg |
| Max working temp | 60 c (consistently) | Size Range | ½”-15MM TO 12’’-315MM |
| Connection End | Flanged as per ANSI B 16.5 (150#) & BS 10 (Table D/E/F) & DIN STD. | Standard | As per manufacturer |
| Material Specification | |||
| No. | DESCRIPTION | MATERIAL | QTY. |
| 1) | Side Piece/ Connector | Polypropylene | 2 |
| 2) | Glss Tube | Glass ( BOROSIL) | 1 |
| 3) | Crisent Ring | PTFE (Teflon) | 2 |
| 4) | Stud | M.S./ S.S. | REQ |
| 5) | Nuts wisher | M.S./ S.S. | REQ |
| 6) | Nut Cap | Polypropylene | REQ |
| 7) | Stud Tube | PP / PVC Coated | REQ |
| Size | L | T | OD | ID | |
| In. | MM | ||||
| 1/2" | 15MM | 175 | 12.5 | 100 | 13.5 |
| 3/4" | 20MM | 177 | 14.5 | 101 | 19 |
| 1" | 25MM | 205 | 20 | 123 | 24 |
| 1 1/2" | 40MM | 207 | 20 | 140 | 38 |
| 2" | 50MM | 223 | 22 | 165 | 50 |
| 2 1/2" | 65MM | 250 | 25 | 185 | 63 |
| 3" | 80MM | 261 | 25 | 201 | 75 |
| 4" | 100MM | 285 | 28 | 228 | 100 |
| 6" | 150MM | 403 | 30 | 305 | 150 |
|
| Material Of Construction | Polypropylene (PP) | Construction | One Piece Body |
| Design | Top Entry | Test pressure | 08 kg./cm2 |
| Max working temp | 50 c (consistently) | Size Range | 25MM to 80MM |
| Connection End | Solid Seal screw / Plain and Ball Valve | Standard | As per manufacturer |
| Material Specification | |||
| No. | DESCRIPTION | MATERIAL | QTY. |
| 1) | Body | PP (Polypropylene) | 1 |
| 2) | Ball | PP (Polypropylene) | 1 |
| 3) | Stem / SPINDAL | PP With Ms insert | 1 |
| 4) | Cover | PP (Polypropylene) | 1 |
| 5) | Seat Ring | PTFE / LD | 2 |
| 6) | Cover gasket | Neoprene | 1 |
| 7) | Stem "o" ring | Neoprene Rubber | 1 |
| 8) | Handle | PP With MS Coated | 1 |
| 9) | Handle Hex Pin | MS / SS | 1 |
| 10) | Handle Cap | PP | 1 |
|
| Material Of Construction | Polypropylene (PP) | Construction | 3 Piece Body. |
| Design | Union Assembly. | Test pressure | 07 kg./cm2 |
| Max working temp | 50 c (consistently) | Size Range | 15 m to 100MM |
| Connection End | Solid Seal screw / Plain and Ball Valve | Standard | As per manufacturer |
| Material Specification | |||
| No. | DESCRIPTION | MATERIAL | QTY. |
| 1) | Body. | Polypropylene | 1 |
| 2) | Stem / SPINDAL | Polypropylene | 1 |
| 3) | Ball | Polypropylene | 1 |
| 4) | Cover | Polypropylene | 2 |
| 5) | Seats | PTFE/LD | 1 |
| 6) | Screw end connector | Polypropylene | 2 |
| 7) | Cover Gasket | Neoprene Rubber | 2 |
| 8) | Stem"O" Ring seal | Neoprene Rubber | 1 |
| 9) | Hundle | Polypropylene | 1 |
|
| Material Of Construction | Polypropylene (PP) | Construction | Single body moulded |
| Design | One Piece Body. | Test pressure | 07 kg./cm2 |
| Max working temp | 50 c (consistently) | Size Range | 15 m to 200MM |
| Connection End | Solid Seal screw / Plain and Ball Valve | Standard | As per manufacturer |
| Material Specification | |||
| No. | DESCRIPTION | MATERIAL | QTY. |
| 1) | Stem | Polypropylene | 1 |
| 2) | Ball | Polypropylene | 1 |
| 3) | Body | Polypropylene | 1 |
| 4) | Stem"o"Ring | Neoprene Rubber | 1 |
| 5) | Ball Cover | P.C. (Polycarbonates) | 2 |
| 6) | Handle | Polypropylene | 1 |
| 7) | Seats | PTFE / L.D. | 2 |
|
| Material Of Construction | PP (Polypropylene) | Construction | weir type design,Soft seated, raising stem |
| Design | 2 Piece Design | Connection End | Flanged as per ANSI B 16.5 (150#) & BS 10 (Table D/E/F) & DIN STD. |
| Size Range | 15MM to 150MM | Test pressure | 6 kg./cm2 |
| Max working temp | 70 c (consistently) | Standard | As per manufacturer |
| Material Specification | |||
| No. | DESCRIPTION | MATERIAL | QTY. |
| 1) | Body | Polypropylene | 1 |
| 2) | Bonnet | Polypropylene | 1 |
| 3) | Hand wheel | Polypropylene | 1 |
| 4) | Diaphragm | Neoprene Rubber | 1 |
| 5) | Compressor | PP | 1 |
| 6) | Stem / Spindel | M.S. /Brass | 1 |
| 7) | Nut | M.S./ S.S. | 1 |
| 8) | Pin | M.S./ S.S. | 1 |
| 9) | Bolt, Nut, Washer | M.S./ S.S. | REQ |
| 10) | Cap | Polypropylene | 1 |
| Size | L | T | OD | ID | H | |
| In | MM | |||||
| 1/2" | 15MM | 120 | 16 | 100 | 15 | 100 |
| 3/4" | 20MM | 120 | 16 | 100 | 20 | 100 |
| 1" | 25MM | 130 | 17 | 120 | 25 | 114 |
| 1 1/2" | 40MM | 163 | 17 | 140 | 39 | 173 |
| 2" | 50MM | 195 | 20 | 160 | 50 | 187 |
| 2 1/2" | 65MM | 247 | 24 | 185 | 63 | 220 |
| 3" | 80MM | 247 | 24 | 200 | 75 | 220 |
| 4" | 100MM | 340 | 25 | 215 | 100 | 272 |
| 6" | 150MM | 418 | 31 | 295 | 150 | |
|
| Material Of Construction | PP (Polypropylene) | Construction | weir type design,Soft seated, raising stem |
| Design | 2 Piece Design | Connection End | Screw end (BSP thread) |
| Size Range | 15MM to 150MM | Test pressure | 6 kg./cm2 |
| Max working temp | 70 c (consistently) | Standard | As per manufacturer |
| Material Specification | |||
| No. | DESCRIPTION | MATERIAL | QTY. |
| 1) | Body | Polypropylene | 1 |
| 2) | Bonnet | Polypropylene | 1 |
| 3) | Hand wheel | Polypropylene | 1 |
| 4) | Diaphragm | Neoprene Rubber | 1 |
| 5) | Compressor | PP | 1 |
| 6) | Stem / Spindel | M.S. /Brass | 1 |
| 7) | Nut | M.S./ S.S. | 1 |
| 8) | Pin | M.S./ S.S. | 1 |
| 9) | Bolt, Nut, Washer | M.S./ S.S. | REQ |
| 10) | Cap | Polypropylene | 1 |
| Size | L | D | H | |
| In. | MM | |||
| 1/2" | 15MM | 122 | 96 | 82 |
| 3/4" | 20MM | 122 | 100 | 105 |
| 1" | 25MM | 137 | 112 | 114 |
| 1 1/2" | 40MM | 196 | 134 | 173 |
| 2" | 50MM | 222 | 153 | 203 |
|
| Material Of Construction | PP (Polypropylene) | Construction | Ball type design, soft seated, 2 Piece Design |
| Design | 2 Piece Design | Connection End | Flanged as per ANSI B 16.5 (150#) & BS 10 (Table D/E/F) & DIN STD. |
| Size Range | 25MM to 315MM | Test pressure | 10 kg./cm2 |
| Max working temp | 70 c (consistently) | Standard | As per manufacturer |
|
||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
| aterial Of Construction | PP (Polypropylene) | Construction | Ball type design, soft seated, 2 Piece Design |
| Design | 2 Piece Design | Connection End | Flanged as per ANSI B 16.5 (150#) & BS 10 (Table D/E/F) & DIN STD. |
| Size Range | 25MM to 315MM | Test pressure | 10 kg./cm2 |
| Max working temp | 70 c (consistently) | Standard | As per manufacturer |
| Material Specification | |||
| No. | DESCRIPTION | MATERIAL | QTY |
| 1) | Top Body | Polypropylene | 1 |
| 2) | Bottam Body | Polypropylene | 1 |
| 3) | Ball | Polypropylene | 1 |
| 4) | Ball Ring | Polypropylene | 1 |
| 5) | Seat Ring | Neoprene Rubber | 1 |
| 6) | Stud, Nut & Washer | SS | Req. |
| All Dimensions are in ± 2MM | ||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||
Krishna (GokulPlast)
18,Shreeji Industrial Park, Kujad-Bakrol Road, Ahmedabad-Indore Highway, AT.Post-Bakrol-Bujrang-382430, TA-Dascroi, Dist-Ahmedabhttps://my.exportersad, Gujarat - 500027
Share us via
