Gokul Traders

Laxmi Road, Pune, Maharashtra

Carbide Tipped ToolsK05, K10, K20, P10, P20, P30 and P40 Grades of carbide.

• As per ISO Standard.
• Turning & Facing Tool
• Boring Tool.
• Parting & V Tool
• Grooving Tool.
• Threading Tool. (Internal & Externa)
• Scrapers.
• Special Tools as per Drawing.

Features:

• Ergonomic design, small size, light weight, easy to operate.
• The stylus drive unit can be fitted in the main unit for standard measurement, or separated from the display unit, which allows more flexible measurement in any orientation.
• Bluetooth capability; supports wireless connection with mobile and mini printer.
• Built-in lithium battery, working time over 50 hours.
• Power-saving features as auto sleep & auto power off.
• Large capacity data storage; storage of 100 items of raw data and measured profiles.

Features:

• This high precision screwless vise has a one-piece body.
• Precision ground to a mirror finish.
• Ideal for holding small parts.
• Simple operation and extremely versatile
• The body and jaws are hardened .
• All sides are flat, square, and parallel .

Features:

• Fitted with Thrust Bearing for Smooth Movement.
• Positive locking to withstand heavy loads.
• Horizontal Swivel movement 360º.
• Vertical swivel movement 90º.
• Fine acme thread screw made out of special steel.
• Quick alignment to machine tables using a longitudinal slot.
• One vertical Two horizontal ‘V’ grooves are provided in hardened and ground jaws .
• Crank Handle is made of unbreakable steel provided with a spring loaded mechanism.
• Supplied with Stopper for Fast Production.

COMBINATION SQUARE SET

• Center head (made of cast iron): to locate center of cylinders with diameter (Ød): 30-100mm accuracy: ±0.15mm
• Protractor head (made of cast iron): set the blade at desired angle to an edge of a workpiece, and can be used to measure angles range: 0-180° accuracy: ±20min.
• Square head (made of cast iron): set the blade at 90° or 45° to an edge of a workpiece accuracy: +8min for 90° square, +10min for 45° square
• Blade (made of stainless steel): range: 300mm/12", graduation: 0.5mm and 1/32" on front face, 1mm and 1/64" on back face
• Optional accessory: rigid rule (code 7113)

DIGITAL MOISTURE METER CODE 9341-50

• Suitable for wood, smooth cement, hard gypsum, mixed mortar, brick, etc.
• Measure moisture, temperature and relative humidity
• Temperature type: ambient, dew point, wet bulb
• Maximum and minimum modes
• Automatic power off

MiniCool MC1700 For Maximum heat dissipation and extended tool life

• Strong magnetic base
• Separate on/off air and luid controls
• Stainless steel armoured syphon hose and air hose
• Nozzle connected via Loc-Line® lexible hose
• Simple, inexpensive, rugged
• Single spray unit

Some of the salient features of our Bench centers:

• The base of the bench center and its heads are stress relieved.
• One of the centers is spring loaded to ensure uniform pressure while holding and easy loading and unloading of work.
• Centers are made from high carbon steel hardened and ground finish, having morse taper MT-3 and are replaceable.
• Both heads are adjustable for easy and quick setting of the required distance between centers.
• The bed of the bench center is provided with two T-slots parallel to each other.

Features:

• The Table & Body manufacturered from close grain shock resisting cast iron.
• The body is provided with two bolt slots in Code No. U335 & U337 for mounting on machine .
• Table vertically & Horizontally.
• Provided with quick & precise disengagement of worm drive.
• Efficient lock provided.
• End play in wormshaft is adjustable.
• An eccentric sleeve with thrust Bearing races in the worm shaft.
• Provision for fine zero adjustment when setting work piece.Works as an index centre in the vertical position as well as convential Rotary Table grarduated 360 Indexing Plate is provided to enable the user to convert quickly to use indexing plates for fast setting.
• Direct reading to 2 minutes for size 6", 8" & 10" on hand wheel scale.
• Direct reading to 1 minute for size 12", 15", 18" & 20" in hand wheel scale.
• High accuracy, easy reading of all dias clear & functional arrangement of all operating elements sturdy yet simple good looking practical design. These are widely used for circular cutting, angle setting, boring & spot facing with a milling machine.

Accuracy:

• Maximum error 2 miniutes of circular division using hand wheels.
• Table flat to within 0.005mm/100mm.
• Working surface rotates in its own plane to within 0.01 mm.
• Horizontial & vertical supporting surface square within 0.01mm/100mm.
• Centre bush bore is true to table axis within 0.008 mm.
• Maximun parrallism error through 360 rotation of table is 0.001mm.

Features:

• Continuous Screw giving powerful grip on work.
• No lifting of the sliding jaw.
• Moving jaw is plain & fixed is provided with one vertical & one horizontal 90° V-grooves.

Luthra Cast Iron I-Section Straight Edges are made of good quality closed grain cast iron strictly as per IS 210:1993 confirming to Grade FG-220.

• Castings are stress relieved either by natural ageing or by artificial seasoning.

• Hardness 170-220 BHN.
• Hand scrapped for surface finish of Grade-1 accuracy.
• Wooden covers are provided with each straight edge to protect working surfaces.
• Safe storage wooden box can also be provided on request at extra cost.
• Actual dimensions of Straight Edges may be more or less than those mentioned in the table below therefore the sizes and dimensions of straight edges of the same length may vary.
• Only match pair Straight edges will have the same dimensions (i.e. overall depth). The flatness and parallelism will be within specified limits of the standard and those can be used as Matched pairs.
• I-Section Straight Edges are supplied with computerized calibration certificate traceable to National Physical Laboratory (NPL, Govt Of India ) New Delhi.

The protractor also includes depth gauge scale for measuring the depth

• Elegant Design
• Accurate Graduation
• Polished Finish

Features

• Wide range and high accuracy dial indicating torque wrench. Ideal for torque quality inspections
• Easy to ready dial face has follower hand memory pointer that stays on peak torque for convenient reference
• Use for tightening purposes by simply rotating the dial to the desired torque. Completed tightening is achieved when the pointer indicates "0".
• DB is not length dependent. Therefore, accuracy is consistent regardless of where the hand is placed during operation.
• The dial indicator has a full-surround protective cover to prevent damage to external objects (except DB420N, DBE, and DBR series models).
• DB25N to DB280N models have a resin grip. Lowest torque range models have index finger handles designed to guide you to use light hand force to avoid possible over-torque.
• DBE has an extension handle.
• For DBR models, applies load by lever block or winch.
• Applicable for international use including the EU region. Compliant with calibration procedures of ISO 6789 Type I Class B.