Our Products
Tube Mill
2 Products availableIndustrial Mill Rolls
2 Products availableRoll Forming & Bending Machines
2 Products availableMachines And Equipments
1 Products availableGarden & Outdoor Furniture
1 Products availableTextile Machinery
1 Products availableDrill & Boring Equipments
1 Products availablePower Saws
1 Products availableCutting Machine
1 Products availableWe offer a complete product range of Push Pointer, Strip Shear and Welder, Pipe Bundling Machine, Annealing Equipment and Tube Hydrotester
GMT Tube Push Pointer Machine is hydraulically operated for PUSH POINTING Tubular product prior to cold drawing. The Machine can handle Tubes having diameter 12 mm. O.D. minimum to 140 mm. O.D. maximum, both in Ferrous & Non-Ferrous material. Large size machines can also be offered. The conventional method of swaging is not only noisy & time consuming, but also produces inaccurate & irregular shaped points.
GMT Machines does the pointing with far more ease. It can produce points in four different length upon a maximum of 250 mm. The machine is also capable of Nozzeling the point from 50 to 75 mm. This machine is supplied along with a suitable handling system. The machine office many advantages over the conventional swaging/squeeze operations.
Features
Model | Max. Push Force | Max. Tube OD. |
---|---|---|
GMT-TPP 50 | 50,000 Lb | 88.9 mm |
GMT-TPP 75 | 75,000 Lb | 130 mm |
GMT-TPP 75/150 | 75,000/1,75,000 Lb | 140 mm |
Metal Processing Equipment
We provide tube forming mill for tubes of ASTM A Sanitary tube, ASTM A-249 heat exchanger tube, JIS G-3468 large diameter pipe and etc.
Bright annealing Forming Mill comes with on line Bright annealing equipment gives bright annealed tubes for heat exchangers, food/ diary, instrumentation industries application. Our stainless steel tube forming mill also comes with in-line bright annealing equipment and eddy current inspection equipment, inside bead rolling system.
be, jis g-3468 large diameter pipe and etc.
Features
Model | Driven idle/Shafetr | Speed | Thickness |
---|---|---|---|
GMT-32 | 30 mm/25 mm | 8 M/min | 0.2 mm-1.0 mm |
GMT-50 | 50 mm/35 mm | 7/3.5 M/min | 0.6 mm-2.5 mm |
GMT-65 | 65 mm/45 mm | 6/3 M/mm | 0.8 mm-3.5 mm |
GMT-80 | 70 mm/50 mm | 5/2.5 M/min | 1.0 mm-4.5 mm |
GMT-120M | 80 mm/60 mm | 4/2 M/min | 2.0 mm-6.0 mm |
GMT-120H | 120 mm/65 mm | 4/2 M/min | 2.0 mm-9.0 mm |
Model | AC Vector (HP) | O.D Range | Thickness |
---|---|---|---|
GMT-40 BA | 10+10+10 | Dia 9.5-38.1 mm | 0.5 T-2 T |
GMT-50 BA | 20+15+15 | Dia 19 mm-6.3 mm | 0.7 T-3 T |
GMT-65 BA | 30+20+20 | Dia 38 mm-114.3 mm | 0.8 T-3.5 T |
GMT supplies modern HFIW SS & ERW Tube Mills with most advance entry section, quick changing mill section, variety of flying cutoff machines and accurate tooling to meet the stringent requirements of general engineering, automotive, cross country pipe lines, structural, boiler, heat exchanger and other relevant applications.
GMT also supplies various tube finishing equipment like End Facing, Threading, Straightening, Hydro testing, Pointing, Drawing & Automatic Bundling etc.
The Tube Mills are robust in design, employ highly efficient helical drive system and various levels of automation to suit customers requirements. The special shaping stands and Turks head ensure complex hollow section production with precise quality. Cutoff machine can be selected according to productivity & application like Metal Saw Cutoff/ Press Cutoff.
Toolings are made of special tool steel to achieve maximum wear resistance and greater life.
GMT provides complete services start from project engineering right up to commissioning, startup & initial production assistance and after sales services.
Features
Model | TUBE OD (mm) | TUBE THICKNESS (mm) | MAX. LINE SPEED (M/mm) | |||
---|---|---|---|---|---|---|
Min. | Max. | Min. | Max. | Low Speed | High Speed | |
GMT 1.5 | 10.0 | 38.1 | 0.5 | 2.6 | 60 | 100 |
GMT 2 | 12.7 | 50.8 | 0.6 | 3.2 | 60 | 100 |
GMT 3 | 15.88 | 76.2 | 0.8 | 3.6 | 60 | 100 |
GMT 3.5 | 21.3 | 88.9 | 1.0 | 5.5 | 50 | 80 |
GMT 4.5 | 33.4 | 114.3 | 1.2 | 6.0 | 50 | 80 |
GMT 5 | 42.4 | 127.0 | 1.6 | 6.5 | 50 | 90 |
GMT 6.5 | 60.3 | 168.3 | 2.0 | 7.1 | 40 | 70 |
GMT 8.5 | 88.9 | 219.3 | 2.8 | 9.5 | 20 | 35 |
GMT offers widest range of Horizontal Accumulators in different models suitable for any type of Tube Mill and Forming line. These accumulators store strips from 20 mm to 1200 mm wide and 0.4 mm to 10 mm thick. This range is covered with various type of designs.
Features
Model | Strip Width Range (mm) | Wall Thickness Range (mm) | Max. Mill Speed (M/min.) | Min. Strip Storage (Minutes) |
---|---|---|---|---|
GMT-HSA 35 | 32-120 | 0.6-2.5 | 150 | 6 |
GMT-HSA 45 | 40-240 | 0.8-3.5 | 120 | 6 |
GMT-HSA 55 | 65-360 | 1.0-5.4 | 120 | 6 |
GMT-HSA 65 | 120-540 | 1.6-7.2 | 90 | 6 |
GMT-HSA 80 | 200-700 | 2.3-10 | 80 | 6 |
GMT offers Single/Triple tube type draw benches with automatic operations, designed for high yield, perfect quality and precise applications.
Features
Model | NORMAL MAX OD (mm) | MAX. LENGTH OF PRODUCT TUBE (Mtrs) | PULL FORCE (MT) |
---|---|---|---|
GMT-TDB 50A | 50.8 | 12.0 | 0-3.3-10 |
GMT-TDB 50B | 50.8 | 12.0 | 0-5-15 |
GMT-TDB 75 | 76.2 | 12.0 | 0-6.6-20 |
GMT-TDB 90 | 88.9 | 18.0 | 0-10-30 |
GMT-TDB 115 | 114.3 | 18.0 | 0-13.3-40 |
GMT-TDB 130 | 130.0 | 18.0 | 0-16.6-50 |
GMT offers Slitting Lines for Hot Rolled and Cold Rolled steel strip to produce high quality of slit strips. These lines are of various designs to suit customers requirements in terms of automation level, flexibility of operations and production capacity. The capacity of these lines ranges from 300 mm to 2100 mm width and 0.3 mm to 12.0 mm thickness and coil weight up to 40 M Tons. GMT Slitting Lines produce superior quality of Slit coils with high productivity.
Features
Model | Strip Width | Strip Thickness | Max. Coil Weight |
---|---|---|---|
GMT-SL 45 | 150-450 | 0.3-1.6 | 8 MT |
GMT-SL 125 | 500-1250 | 0.4-4.0 | 25 MT |
GMT-SL 160 | 600-1650 | 1.2-7.1 | 30 MT |
GMT-SL 220 | 900-2100 | 2-12.0 | 40 MT |
GMT Shear & End Welders are most technically advanced of all Shear/Welders available in the world. A wide range can handle strip from 20 mm to 1250 mm wide and 0.5 mm to 10 mm thick can be handle. GMT Shear/Welders are designed to provide fast, accurate means of automatically joining coils on all type of strip processing lines. This increases the productivity as well as eliminates the hazardous manual feeding of new coil into an operating line.
Features
Model | Type | Strip Specs |
---|---|---|
GMT-SW S | Portable Pneumatic Shear & TIG welder (Semi-automatic) | Up to 240 mm x 4.0 |
GMT-SW M | L Type hydraulic shear & TIG/MIG welder (Automatic) | Up to 700 mm x 8.0 |
GMT-SW L | Roller shear MIG welder (Automatic) | Up to 2000 mm x 16.0 |
GMT offers automatic Cam operated Twin Head End Facer with three tool system. Machine can be installed offline / online to match mill output rate.
Features
Model | Tube OD | Tube Thickness | Max. Output Rate |
---|---|---|---|
GMT-TEF 50 | 12-50 | 0.8-3.0 | 20 Tube/min |
GMT-TEF 90 | 19-88 | 0.8-4.5 | 18 Tube/min |
GMT-TEF 120 | 20-115 | 1.0-6.0 | 17 Tube/min |
GMT-TEF 160 | 78-168 | 2.0-7.5 | 6 Tube/min |
High speed tube and pipe bundling and strapping machines take the tube directly from the mill and pack the tube ready for transport and sale. No need to store tube in bulk prior to packing.
FeaturesSpecially built cold saw bar and tube cutting machines that are reliable, fast and easily integrated to fit your specific need and application. All of our saws are engineered and manufactured with high quality in the GMT Plant.
Features
Model | Thickness | Tube Size | Speed |
---|---|---|---|
GMT – CS – 60 | 0.4 – 32 | Dia 12.7 ~ 60.3 | 150 M/min |
GMT – CS – 80 | 0.6 – 32 | Dia 12.7 ~ 80.0 | 120 M/min |
GMT – CS – 120 | 0.8 – 32 | Dia 33 ~ 114 | 100 M/min |
GMT, where quality is watchword, makes foray in manufacturing of rolls with typical profiles. May it be selection of raw material, heat treatment or machining, GMT standards are set high to achieve high precision, toughness, maximum wear resistance for greater productivity.
Quality assurance:
Each and every roll is inspected between process by using sophisticated equipment for dimensions, surface texture and micro structures. The profile is precisely checked with a spring steel template (gauge) made on CNC wire cut machine.
Features
S.No. | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Hardness In HRC | 62 | 62.8 | 62 | 62.5 | 62 | 62 | 62 | 62.4 | 62.2 | 62.2 | 62 | 62 | 62 | 62.2 | 62.2 | 62 |
Our machine is built with extreme technical and quality control processes to ensure high performance from them. These machines are known for their robust design, steady performance, easy operation and hassle-free installation.
Kw | Hz | KVA | O.D. Range |
---|---|---|---|
75 | 30k | 90 | 1/4″ – 1-1/4″ |
150 | 30k | 180 | 1/4″ -2″ |
300 | 1-6k | 360 | 1″ -3″ |
400 | 1-3k | 480 | 1″ -4″ |
500 | 1-3k | 600 | 5″ -8″ |
Kw | Hz | KVA | O.D. Range |
---|---|---|---|
75 | 30k | 90 | 1/4″ – 1-1/4″ |
150 | 30k | 180 | 1/4″ -2″ |
300 | 1-6k | 360 | 1″ -3″ |
400 | 1-3k | 480 | 1″ -4″ |
500 | 1-3k | 600 | 5″ -8″ |
We are engaged in manufacturing, exporting and supplying of Pipe Threading Machines. They are manufactured using top quality raw material procured from certified vendors of the industry.
Features
Model | Range | Thick | Speed |
---|---|---|---|
GMT – TM – 80 | 12.7 ~ 80 | 1.0 ~ 4.0 mm | 21 Pin/min |
GMT – TM – 120 | 21.3 ~ 114.0 | 1.6 ~ 6.0 mm | 16 Pin/min |
GMT – TM – 170 | 33.7 ~ 168.0 | 1.6 ~ 8.0 mm | 06 Pin/min |
GMT 6/10 DRIVE CROSS ROLL tube straightening Machines are designed to handle tube of Outer Dia from 6 mm to 170 mm in different models. These machines are based on well proven rotary pressure and deflection principle of straightening, which gives very high degree of straightening ranging from 1 mm to 0.3 mm in 1000 mm.
The rolls are mounted in pairs and are drive by two identical motors through totally enclosed gear boxes and box and universal spindel couplings.
Features
Model | Normal Maximum Diameter (mm) | Minimum Diameter (mm) | Normal Maximum Wall (mm) | Maximum Diameter Admitted (mm) | Normal Operating Speed Meters per Min. | ||
---|---|---|---|---|---|---|---|
Single | Two | Variable | |||||
GMT-TSM 65 | 65 | 13 | 6 | 100 | 75 | 120 | 120 |
GMT-TSM 75 | 75 | 16 | 6 | 114 | 75 | 120 | 120 |
GMT-TSM 114 | 114 | 20 | 8 | 140 | 75 | 120 | 120 |
GMT-TSM 140 | 140 | 50 | 12 | 169 | 30 | 60 | 60 |
GMT Hydrotesters are equipped with oil/water high pressure intensifies, automatic handling system and chart type pressure recorders. They can test up to 5000 psi pressure covering various AP1/ASTM/BS standards with single head multiple heads.
Features
Model | Tube OD | Tube Thickness | Max. Test Pressure |
---|---|---|---|
GMT-TH 80 | 12.7-76.2 | 0.8-3.5 | Up to 1500 psi |
GMT-TH 100 | 19.05-104.6 | 1.8-4.5 | Up to 3200 psi |
GMT-TH 160 | 21.3-168.3 | 1.6-7.1 | Up to 5000 psi |
GMT-TH 220 | 38.1-219.3 | 2.0-10.0 | Up to 5000 psi |
Our CNC Levelling & Shearing machine is high speed Computerised Numerical Control (CNC) and AC Servo Drive for better positioning/Length control systems for cutting accuracy.
Model | Sheet Thickness | Steel Width (mm) | Coil Weight | Leveling Speed |
---|---|---|---|---|
CTL-G-60 | 0.3 – 2.0 | 100 – 600 | 2 – 5 | 100 M/min |
CTL-G-120 | 0.4 – 3.2 | 600 – 1230 | 10 – 20 | 80 M/min |
CTL-G-150H | 0.8 – 6.0 | 600 – 1560 | 15 – 25 | 60/min |
BCTL-G-150L | 0.2 – 2.0 | 600 – 1560 | 15 – 25 | 100 M/min |
CTL-G-150M | 0.4 – 3.2 | 600 – 1560 | 15 – 25 | 80 M/min |
CTL-G-220H | 2.0 – 8.0 | 900 – 2100 | 15 – 36 | 40 M/min |
GMT, where quality is watchword, makes foray in manufacturing of rolls with typical profiles. May it be selection of raw material, heat treatment or machining, GMT standards are set high to achieve high precision, toughness, maximum wear resistance for greater productivity.