GMS SYSTEMS

Peelamedu, Coimbatore, Tamil Nadu

Steatite Ceramic Terminal Block with Nickel Plated Terminals → Die cast Aluminium / S.S mounting head & adjustable flange → Ceramic protection tube type KER 610 with 60 % , 80% AI2O3 → Holding tubes made of SS 304/SS316 of 32 mm , 25mm , 20mm dia are used to hold ceramic sheath with head. → Type KER 710 – Recrystalised – High alumina tube with 99.9 % AI2O3 available in 24mm, 20mm, 15mm, 10mm, 8mm, 6mm dia. → Type ‘R’ (Pt RH 13 % -Pt) & Type ‘S’ (Pt Rh 10 % -Pt) Are used to measure temperature upto 1400 Degree C / 1600 Degree C → Type ‘B’ (Pt Rh 6% - Pt Rh 30% or Pt 18) are temperature upto 1800 Degree C . Thermo element pair is protected by two or three ceramic sheaths of various types depending upon working Temperature and environmental conditions.Color monitor (800 x 600)

ALYW-F series antenna Surge Protective Device is suitable for satellite TV high frequency, satellite signal receiver, microwave machine station, the feed system of moving communication, which is to avoid the damage to the Receiving equipment caused by over voltage of feed inductance. These series installed at the joint of LPZOB and LPZ1.Used in these systems such as the air port's navigating station, (NDB) long wave communication station, small power of short wave communication BP paging transmitter, closed-circuit TV, Cable TV, VSA satellite TV, satellite receiving station of the securities, microwave communication receiving and dispatch station, MMDS microwave communication and GPS global position system.

We provide best in quality durable Surge Protection Devices as per IEC 61643-1 Class B(10/350us)Type 1, Class B+C, Class C (8/20 µs) RDSO Approved Type 2 & Class D Surge Protection Devices to enhance life of various electrical electronics systems for its long life and uninterrupted operations. → Our Surge Protection Devices ensuring their unmatched efficacy for the incomers, ACB, LT Panels, Distribution Panel, MCCB and AMF Panel and all Electrical , Electronics, Instruments components from power surges.   Class B, Class B+ C, Class D type Surge Protection Devices:   →  Surges, or transients are brief overvoltage spikes or disturbances on a power waveform that can damage, degrade, or destroy electronic equipment within any Industrial, Manufacturing facility and commercial building due to most equipment is designed to handle minor variations in their standard nominal operating voltage of 110 Vac, 240 Vac, 480 Vac.   → Transients can reach amplitudes of tens of thousands of volts. Surges are generally measured in microseconds.   → Surges generated as part of everyday operations of electrical loads and devices that switch power ON and OFF. Surges that originate also from outside the facility include those due to lightning and utility grid switching.   → Surge is abnormal increase in current and voltage for a very short period of time duration of 8/20 microsecond. A switching surge protection device is an electrical device commonly used to protect Electrical , Electronics, Instruments components from power surges.

Low cost Light weight Built-in laser pointer °C/°F switchable display Target to distance ratio of 1:8 MAX, MIN temperature display Auto 0.1 °C/1°C resolution switching Portable Thermometers are available in different temperature ranges -30 to 400 Degree C, 0 to 800 Degree C, 0 to 1500 Degree C, 200to 1800 Degree C, 600-3000 Degree C. Infrared Thermometer measure the surface temperature of an object. Its optics sense emitted, reflected and transmitted energy which is collected and focused on a detector. Its electronics translate information into a temperature reading which is displayed on the unit. Infrared thermometer for non- contact temperature measurement of an object. Just by pointing the thermometer on to the object and pressing a trigger, surface temperature of the object is instantly displayed on the LCD Panel.It can also compute max & min temperature reading of the surface. Built-in laser pointer helps to aim the target object Our products for Temperature measurement applications: RTD| Thermocouple| Digital Indicator| Scanners Controllers| Optical Pyrometer | Controllers| P.I.D. Controller| Portable Indicator| R Type Thermocouple| Flue Gas Analyzer| Compensating Cable | Laboratory Instruments| Resistance Thermo Detector| Data Logging System and Scanner| Applications: For Iron & Steel | Ceramic Plants | Glass | Power looms | Laboratories | Cement | Heat Treatment |Incinerators | Thermal Power Plant | Foundries | Refractory | Fertilizers | Petro Chemicals | Other Manufacturing Units also for OEM applications We have specially made thermocouple for Heat Treatment, Glass Industries, Foundry, Chemical Industries, Automobiles, Marine, Petrochemicals, Ceramic, TMT Bars, Sponge Iron, Rolling Mills, Forging Units, Ferro Alloys, Cement Industries etc.