The company is a well-reckoned Manufacturer, Exporter and Supplier of UV Adhesive from Bangalore, Karnataka. The Trubond UV Adhesives that we offer are extensively used for bonding, sealing, encapsulating of glass, plastic etc. Our UV Adhesive shows its effect in seconds, when exposed to UV light sources. Our UV Adhesive has excellent optical characters that provide the material with high shear strength.

• General purpose, medium viscosity, high strength.
• Fast fixture, for glass to glass and glass to metal etc.

• Anaerobic & UV curing, high viscosity, high strength.
• Well resistant to impact, vibration and solvent.

• Low viscosity.
• Used for bonding thermoplastic (PMMA, PC, etc.)

• General purpose, medium to low viscosity, high strength.
• Fast fixture, for glass to glass and glass to metal etc.

• Medium to high viscosity, high strength.
• Fast fixture, for glass to glass and glass to metal etc.

We are a well-known Manufacturer, Exporter and Supplier of Thread Locking Adhesive in the market. Our Trubond Thread Locking Adhesive is widely used for sealing, locking and preventing the threaded fasteners from corrosion or various environments. Our Thread Locking Adhesive can be used in the place of spring washers, pins and other traditional mechanical locking methods. We make available our Thread Locking Adhesive at very competitive market prices.

• Low viscosity
• Suitable for most metal surfaces.
• Ideals for fasteners diameters of M2-M12, controlled lubrcity.

• Medium strength
• General purpose, thixotropic viscosity. For locking and sealing M6-M20 threads.
• Parts can be separated using hand tools, controlled lubricity, can attain accurate clamp loads.

• Medium to high strength
• Thixotropic viscosity, excellent chemicals resistance.
• Suitable for most metal surfaces, for fasteners smaller than M20.
• A permanent threadlocker, Excellent for preventing rust and corrosion in extreme chemical / environmental conditions.

• High strength, low viscosity
• For permanent locking and sealing, fasteners smaller than M36.
• Heating and tools required for disassemble.

• High strengthHigh viscosity, excellent chemicals resistance.
• For permanent locking and sealing bolts up to M36.
• Prevent rust and corrosion of threaded fasteners. Heating and hand tools required for disassemble.

• Low strength, thixotropic viscosity
• Suitable for most metal surfaces, Parts can be disassemble with hand tools.
• Ideals for fasteners diameters of M6 and smaller, controlled lubricity can attain accurate clamp loads.

• Oil resistant, medium strength
• Fast curing, used on inert surface, improved oil tolerant, easy to disassemble, can be applied on surfaces with oil.
• For fasteners smaller than M20.

• High strength, Low viscosity & fast curing.
• For permanent locking and sealing, fasteners smaller than M36.

• High temperature/high strength
• Withstands temperatures up to 230^oC.
• For locking and sealing the thread of cylinder without being cleaned.
• Provides a fast cure on most surfaces, including received fasteners.
• Recommended for bolts up to M36. Heating and hand tools required for disassemble.

• Wicking grade
• Medium strength, low viscosity. fast curing.
• For locking and sealing pre-assembled bolts M2 12. Also for sealing welds and porous metal parts.
• Prevent rust and corrosion. Heating and tools required for disassemble.

We offer high efficient Metal Repairing Adhesive. We are a recognized Manufacturer, Exporter and Supplier of Metal Repairing Adhesive in the market. Glue Farm industrial Metal Repairing Adhesive is widely used to repair and rebuild corrosion, abrasion, grind and breach parts. By using our Metal Repairing Adhesive, one can make the metal equipment return to service quickly, beside, it increases its operation life, reduces consumptions of spare parts, decreases maintenance fees or improves the equipments reliabilities.

• Rebuild and repair of porous, crackle on casting iron surface.
• Wear and corrosion resistance , similar to original material colors.
• Can be drilled, tapped and machined after curing.

• Rebuild and repair various aluminium material and cast aluminum imperfect, crackle and wearing.
• Wear & corrosion resistance, similar to original material colors.
• Can be drilled, tapped and machined after curing.

• Rebuild and repair various steel material imperfect, crackle and wearing.
• Wear and corrosion resistance, similar to original material colors.
• High strength, can be drilled, tapped and machined after curing.

• Rebuild and repair various copper material and cast copper imperfect, crackle and wearing.
• Wear & corrosion resistance, similar to original material colors.
• Can be drilled, tapped and machined after curing.

Leveraging on our experience, we bring forth high quality Epoxy Adhesive in the market. We are a credible Manufacturer, Exporter and Supplier of Epoxy Adhesive in the market. Trubond Epoxy Adhesives are widely used for bonding metals, ceramics, woods, glass and some plastics. Our Epoxy Adhesive is extensively used for structural bonding and encapsulating parts that has volume unshrinking characters and provides high strength.

• 100% two components epoxy resin formulated for maximum protection and positive support of wear lines of cone crushers, gyratory crushers.
• Melting or special equipment are non-needed in application.
• Low volume shrinking, eliminates gaps between liners.
• Easy and safe mixing and using.

• A unique, two-component, rapid setting concrete repair and grouting system that outperforms conventional concrete repairs.

• Not shrink at any actual circumstances temperature, resistant to freeze, melting and melting of ice or salt. Typically used for the repair of concrete highway walls, pot holes, airport runways, anchoring machinery. For business, it can be used for refrigerating floors, loading docks, grouting bedplates and soleplates, deck and bridging and anchoring bolts and handrails.

• Fast curing, a strongly support the cone and liner after curing , high impact and shock resistance.
• It is convenient and fast to use, with long working period and high efficiency.

• Used for spring and hydraulic cone crusher cone and gyratory crusher, filling the gap between liner and cone; Also can be used for equipment stand leveling. Mainly used for mining and electricity industries.

• Two components modified resin curing at room temperature. Pour mixed material into cavities between backing and liners or support structure to achieve no gap filling and bonding.

Are you searching for Retaining Adhesive? If yes, then we assure to serve you in the best possible way. We are a dependable Manufacturer, Exporter and Supplier of Retaining Adhesive among the clients. Our Trubond Retaining Adhesives can be used for non-threaded cylindrical metal assemblies. Our Retaining Adhesive is highly efficient in increasing the shear strength of press fits and slip fits. Besides, we offer the best deal to avail our Retaining Adhesive.

• Press fit, oil tolerant
• High strength. sealing & retaining cylindrical assemblies.
• Gaps fill up to 0.13mm.
• Fixture in 10 minutes, prevent fretting and corrosion of metal assemblies.

• Slip fit , high temperature resistancevHigh viscosity, high strength, liquid retaining.
• Gaps fill up to 0.3mm .
• Withstands temperatures up to 230^oC.

• Press/slip fit , easy to disassemble
• For bonding cylindrical parts where disassembly is required.
• Gaps fill up to 0.25mm, fixtures in 1030 minutes.

• Press fit repair
• Fast curing, high strength, high viscosity.
• For refitting worn shafts, housing covers, key and keywaym bearings and sleeves, housing couplings, keyways etc
• Gaps fill up to 0.5mm.

• Press fit, low viscosity
• High strength, for retaining rigid metal parts.
• Gaps fill up to 0.13mm.
• Suitable for diverse metal parts.

• Slip fit, high strength
• Fast curing.
• Used for high dynamic force or cyclie loading , retains cylindrical assemblies up to 0.25mm diametral.

• Press fit, high strength & fast curing
• Withstands temperatures up to 175^oC.
• Gaps fill up to 0.15mm, fixtures in 5 minutes.
• Typical applications include holding gears onto gearbox and rotors on motor shafts.

• Slip fit, high strength
• For retaining cylindrical axle and bushing, wheel bearing; or for refitting worn shafts, housing and keyway etc
• Gaps fill up to 0.25mm. Fixture in 10 minutes.

The company is reckoned as one of the reputed Instant Adhesive Manufacturers, Exporters and Suppliers from Bangalore, Karnataka. We make use of high quality materials to manufacture our Instant Adhesive. Our Trubond Instant Adhesives can fast bond different types of materials. Our Instant Adhesive is highly efficient for metals, rubbers, plastics, glasses, leathers, woods, ceramics, etc.

• Surface insensitive
• General purpose, medium viscosity. Suitable for difficult-to -bond materies.
• Used on inert surface, bonding acidic, absorptive and porosity materials.

• General purposeLow viscosityfast curing.
• Low humidity cure.

• Rubber toughened
• Medium strength, medium viscosity, fast curing.
• Excellent impact, vibration, thermal, and peel resistance.
• Excellent gap filling capability.

• Plastic bonder
• Excellent humidity and climate resistance.
• For plastic bonding.

• Surface insensitive
• High strength, low viscosity, fast curing.
• Suitable for insensitive surface, bonding acidic, absorptive and porosity materials.

• Low odor, low bloom
• Low viscosity, low odor.
• The parts is clear, unpolluted after being bonded.

• Plastic bonder
• General purpose, medium viscosity, bonding rubber, metal and plastic parts.
• Gaps fill up to 0.1mm.

• Thermal resistant
• Rubber toughened , medium viscosity.
• Impact resistance, withstands temperatures up to 120oC, the thermal aging strength is 10 times than general purpose.

• Low odor, low bloom
• Excellent humidity resistance, for less precisely fitted parts.
• Eliminates the need of sophisticated ventilation.

• Surface insensitive
• General purpose, low viscosity.
• Suitable for inert surface, bonding acidic, absorptive and porosity materials.

• Toughened
• Excellent impact and peel resistance.
• Excellent gap filling applications.

• Metal bonder
• High viscosity, excellent impact resistance.
• For metals bonding.

• Surface insensitive
• General purpose, high viscosity,
• Suitable for insensitive surface, bonding acidic, absorptive and porosity materials.
• Instant adhesive
• Rubber toughened
• Medium viscosity, excellent impact, vibration, thermal, and peel resistance.

• Metal bonder
• Medium viscosity, fast fixture, for metals bonding.

• Thermal cycling resistance
• Medium viscosity, for most metals, plastic and rubbers.
• Resists temperatures to 100^oC continuous or up to 120^oC intermittent.
• Excellent thermal cycling and humidity resistance.

We offer Trubond Power and Electrical Sealants that are suitable for sealing, waterproofing and insulating. Electrical Adhesive is mostly used in electrical porcelain, high pressure switch, mutual inductor, mains transformer, and many other to enhance the anti-aging properties of the power and electrical products. Procured from leading sources, our Electrical Adhesive is high on quality. Further adding, we are a dependable Manufacturer, Exporter and Supplier of Electrical Adhesive in the market.

Clients can avail our Trubond Structural Adhesives that have excellent tensile, shear and peel strength combined with maximum impact, stress and vibration resistance. Our Structural Adhesive is mainly used for bonding metals, glass, ceramics, ferrites and many other materials. Our Structural Adhesive also meets the norm of set industrial standards. Furthermore, we are a trusted Structural Adhesive Manufacturer, Exporter and Supplier, located in Bangalore, Karnataka.

• Impact resistance
• Bonding most materials, can be used with activator GF7649.
• Suitable for larger gap fill.
• Rigid, flexible, excellent solvent resistance.

• Fast curing
• Bonding rigid materials, e.g. bonding ferrites to plated materials in electric motors, loudspeakers etc. Can be used with activator.

The company is a well-reckoned Manufacturer, Exporter and Supplier of UV Adhesive from Bangalore, Karnataka. The Trubond UV Adhesives that we offer are extensively used for bonding, sealing, encapsulating of glass, plastic etc. Our UV Adhesive shows its effect in seconds, when exposed to UV light sources. Our UV Adhesive has excellent optical characters that provide the material with high shear strength.

• General purpose, medium viscosity, high strength.
• Fast fixture, for glass to glass and glass to metal etc.

• Anaerobic & UV curing, high viscosity, high strength.
• Well resistant to impact, vibration and solvent.

• Low viscosity.
• Used for bonding thermoplastic (PMMA, PC, etc.)

• General purpose, medium to low viscosity, high strength.
• Fast fixture, for glass to glass and glass to metal etc.

• Medium to high viscosity, high strength.
• Fast fixture, for glass to glass and glass to metal etc.

We are a well-known Manufacturer, Exporter and Supplier of Thread Locking Adhesive in the market. Our Trubond Thread Locking Adhesive is widely used for sealing, locking and preventing the threaded fasteners from corrosion or various environments. Our Thread Locking Adhesive can be used in the place of spring washers, pins and other traditional mechanical locking methods. We make available our Thread Locking Adhesive at very competitive market prices.

• Low viscosity
• Suitable for most metal surfaces.
• Ideals for fasteners diameters of M2-M12, controlled lubrcity.

• Medium strength
• General purpose, thixotropic viscosity. For locking and sealing M6-M20 threads.
• Parts can be separated using hand tools, controlled lubricity, can attain accurate clamp loads.

• Medium to high strength
• Thixotropic viscosity, excellent chemicals resistance.
• Suitable for most metal surfaces, for fasteners smaller than M20.
• A permanent threadlocker, Excellent for preventing rust and corrosion in extreme chemical / environmental conditions.

• High strength, low viscosity
• For permanent locking and sealing, fasteners smaller than M36.
• Heating and tools required for disassemble.

• High strengthHigh viscosity, excellent chemicals resistance.
• For permanent locking and sealing bolts up to M36.
• Prevent rust and corrosion of threaded fasteners. Heating and hand tools required for disassemble.

• Low strength, thixotropic viscosity
• Suitable for most metal surfaces, Parts can be disassemble with hand tools.
• Ideals for fasteners diameters of M6 and smaller, controlled lubricity can attain accurate clamp loads.

• Oil resistant, medium strength
• Fast curing, used on inert surface, improved oil tolerant, easy to disassemble, can be applied on surfaces with oil.
• For fasteners smaller than M20.

• High strength, Low viscosity & fast curing.
• For permanent locking and sealing, fasteners smaller than M36.

• High temperature/high strength
• Withstands temperatures up to 230^oC.
• For locking and sealing the thread of cylinder without being cleaned.
• Provides a fast cure on most surfaces, including received fasteners.
• Recommended for bolts up to M36. Heating and hand tools required for disassemble.

• Wicking grade
• Medium strength, low viscosity. fast curing.
• For locking and sealing pre-assembled bolts M2 12. Also for sealing welds and porous metal parts.
• Prevent rust and corrosion. Heating and tools required for disassemble.

We offer high efficient Metal Repairing Adhesive. We are a recognized Manufacturer, Exporter and Supplier of Metal Repairing Adhesive in the market. Glue Farm industrial Metal Repairing Adhesive is widely used to repair and rebuild corrosion, abrasion, grind and breach parts. By using our Metal Repairing Adhesive, one can make the metal equipment return to service quickly, beside, it increases its operation life, reduces consumptions of spare parts, decreases maintenance fees or improves the equipments reliabilities.

• Rebuild and repair of porous, crackle on casting iron surface.
• Wear and corrosion resistance , similar to original material colors.
• Can be drilled, tapped and machined after curing.

• Rebuild and repair various aluminium material and cast aluminum imperfect, crackle and wearing.
• Wear & corrosion resistance, similar to original material colors.
• Can be drilled, tapped and machined after curing.

• Rebuild and repair various steel material imperfect, crackle and wearing.
• Wear and corrosion resistance, similar to original material colors.
• High strength, can be drilled, tapped and machined after curing.

• Rebuild and repair various copper material and cast copper imperfect, crackle and wearing.
• Wear & corrosion resistance, similar to original material colors.
• Can be drilled, tapped and machined after curing.

Leveraging on our experience, we bring forth high quality Epoxy Adhesive in the market. We are a credible Manufacturer, Exporter and Supplier of Epoxy Adhesive in the market. Trubond Epoxy Adhesives are widely used for bonding metals, ceramics, woods, glass and some plastics. Our Epoxy Adhesive is extensively used for structural bonding and encapsulating parts that has volume unshrinking characters and provides high strength.

• 100% two components epoxy resin formulated for maximum protection and positive support of wear lines of cone crushers, gyratory crushers.
• Melting or special equipment are non-needed in application.
• Low volume shrinking, eliminates gaps between liners.
• Easy and safe mixing and using.

• A unique, two-component, rapid setting concrete repair and grouting system that outperforms conventional concrete repairs.

• Not shrink at any actual circumstances temperature, resistant to freeze, melting and melting of ice or salt. Typically used for the repair of concrete highway walls, pot holes, airport runways, anchoring machinery. For business, it can be used for refrigerating floors, loading docks, grouting bedplates and soleplates, deck and bridging and anchoring bolts and handrails.

• Fast curing, a strongly support the cone and liner after curing , high impact and shock resistance.
• It is convenient and fast to use, with long working period and high efficiency.

• Used for spring and hydraulic cone crusher cone and gyratory crusher, filling the gap between liner and cone; Also can be used for equipment stand leveling. Mainly used for mining and electricity industries.

• Two components modified resin curing at room temperature. Pour mixed material into cavities between backing and liners or support structure to achieve no gap filling and bonding.

Are you searching for Retaining Adhesive? If yes, then we assure to serve you in the best possible way. We are a dependable Manufacturer, Exporter and Supplier of Retaining Adhesive among the clients. Our Trubond Retaining Adhesives can be used for non-threaded cylindrical metal assemblies. Our Retaining Adhesive is highly efficient in increasing the shear strength of press fits and slip fits. Besides, we offer the best deal to avail our Retaining Adhesive.

• Press fit, oil tolerant
• High strength. sealing & retaining cylindrical assemblies.
• Gaps fill up to 0.13mm.
• Fixture in 10 minutes, prevent fretting and corrosion of metal assemblies.

• Slip fit , high temperature resistancevHigh viscosity, high strength, liquid retaining.
• Gaps fill up to 0.3mm .
• Withstands temperatures up to 230^oC.

• Press/slip fit , easy to disassemble
• For bonding cylindrical parts where disassembly is required.
• Gaps fill up to 0.25mm, fixtures in 1030 minutes.

• Press fit repair
• Fast curing, high strength, high viscosity.
• For refitting worn shafts, housing covers, key and keywaym bearings and sleeves, housing couplings, keyways etc
• Gaps fill up to 0.5mm.

• Press fit, low viscosity
• High strength, for retaining rigid metal parts.
• Gaps fill up to 0.13mm.
• Suitable for diverse metal parts.

• Slip fit, high strength
• Fast curing.
• Used for high dynamic force or cyclie loading , retains cylindrical assemblies up to 0.25mm diametral.

• Press fit, high strength & fast curing
• Withstands temperatures up to 175^oC.
• Gaps fill up to 0.15mm, fixtures in 5 minutes.
• Typical applications include holding gears onto gearbox and rotors on motor shafts.

• Slip fit, high strength
• For retaining cylindrical axle and bushing, wheel bearing; or for refitting worn shafts, housing and keyway etc
• Gaps fill up to 0.25mm. Fixture in 10 minutes.

The company is reckoned as one of the reputed Instant Adhesive Manufacturers, Exporters and Suppliers from Bangalore, Karnataka. We make use of high quality materials to manufacture our Instant Adhesive. Our Trubond Instant Adhesives can fast bond different types of materials. Our Instant Adhesive is highly efficient for metals, rubbers, plastics, glasses, leathers, woods, ceramics, etc.

• Surface insensitive
• General purpose, medium viscosity. Suitable for difficult-to -bond materies.
• Used on inert surface, bonding acidic, absorptive and porosity materials.

• General purposeLow viscosityfast curing.
• Low humidity cure.

• Rubber toughened
• Medium strength, medium viscosity, fast curing.
• Excellent impact, vibration, thermal, and peel resistance.
• Excellent gap filling capability.

• Plastic bonder
• Excellent humidity and climate resistance.
• For plastic bonding.

• Surface insensitive
• High strength, low viscosity, fast curing.
• Suitable for insensitive surface, bonding acidic, absorptive and porosity materials.

• Low odor, low bloom
• Low viscosity, low odor.
• The parts is clear, unpolluted after being bonded.

• Plastic bonder
• General purpose, medium viscosity, bonding rubber, metal and plastic parts.
• Gaps fill up to 0.1mm.

• Thermal resistant
• Rubber toughened , medium viscosity.
• Impact resistance, withstands temperatures up to 120oC, the thermal aging strength is 10 times than general purpose.

• Low odor, low bloom
• Excellent humidity resistance, for less precisely fitted parts.
• Eliminates the need of sophisticated ventilation.

• Surface insensitive
• General purpose, low viscosity.
• Suitable for inert surface, bonding acidic, absorptive and porosity materials.

• Toughened
• Excellent impact and peel resistance.
• Excellent gap filling applications.

• Metal bonder
• High viscosity, excellent impact resistance.
• For metals bonding.

• Surface insensitive
• General purpose, high viscosity,
• Suitable for insensitive surface, bonding acidic, absorptive and porosity materials.
• Instant adhesive
• Rubber toughened
• Medium viscosity, excellent impact, vibration, thermal, and peel resistance.

• Metal bonder
• Medium viscosity, fast fixture, for metals bonding.

• Thermal cycling resistance
• Medium viscosity, for most metals, plastic and rubbers.
• Resists temperatures to 100^oC continuous or up to 120^oC intermittent.
• Excellent thermal cycling and humidity resistance.

We offer Trubond Power and Electrical Sealants that are suitable for sealing, waterproofing and insulating. Electrical Adhesive is mostly used in electrical porcelain, high pressure switch, mutual inductor, mains transformer, and many other to enhance the anti-aging properties of the power and electrical products. Procured from leading sources, our Electrical Adhesive is high on quality. Further adding, we are a dependable Manufacturer, Exporter and Supplier of Electrical Adhesive in the market.

Clients can avail our Trubond Structural Adhesives that have excellent tensile, shear and peel strength combined with maximum impact, stress and vibration resistance. Our Structural Adhesive is mainly used for bonding metals, glass, ceramics, ferrites and many other materials. Our Structural Adhesive also meets the norm of set industrial standards. Furthermore, we are a trusted Structural Adhesive Manufacturer, Exporter and Supplier, located in Bangalore, Karnataka.

• Impact resistance
• Bonding most materials, can be used with activator GF7649.
• Suitable for larger gap fill.
• Rigid, flexible, excellent solvent resistance.

• Fast curing
• Bonding rigid materials, e.g. bonding ferrites to plated materials in electric motors, loudspeakers etc. Can be used with activator.