GLORIOUS PAINTS AND COATINGS INDUSTRIES

Palghar, Mumbai, Maharashtra

We have hired a team of professionals who take care of the entire lot and make sure that it remains protected from air, dust, water and other damaging factors. We are a quality conscious firm, thus never compromise on the quality of the offerings. In addition, we make use of quality tested raw material and modern work methods for manufacturing the same.

Unique Features & Benefits :

• Excellent durability
• Ease of Application
• Good Corrosion Resistance
• Super silky and Semi Glossy finish.
• Excellent flow characteristics to form smooth and uniform finish
• Excellent color and color retention
• Excellent coverage

Surface Preparation :

• All surfaces should be thoroughly cleaned before painting. Loose and flaking paints should be removed by wire brushes and sure that there is on any greases or oil present on surface. Use clean brushes which were wash with suitable thinner.
• Before application of Glorious Enamel first apply Glorious Primer & Putty for better performance. Enamel paint must be thinned by using thinner to obtain brushing consistency for better application. Allow first coat to dry before applying another coat. It is recommended on wooden surfaces like doors, windows, cabinets; on metal surfaces like grills and gates, and on masonry and metal surfaces. It gives Glossy smooth finish.

Precautions :

• Store in well ambient conditions, Ventilated locations & away from the source of ignition and fire.
• Keep away from children.
• In case of eye/skin contact washes with plenty of water.
• Inhalation / Injection will cause danger. In case move to fresh air & consult medical practitioners in both the cases.
• Do not apply when ambient temperature might drop to level below 10^oC within 4 hrs of application.
• Avoid extra thinning for better results.
• Can be tinted with Universal Stainer before thinning. Do not add more than 5% of Universal Stainer, Stir well tinted paint after tinting & before application.
• The container must be tightly closed when not in use. Stir well and strain before use.
• Use safety equipment’s like rubber or polythene gloves, safety goggles / glasses & face mask.

Technical Data :

• Coverage - On Smooth nonabsorbent surface. 140 – 180 sq. ft/ltr/coat.
• Supply Viscosity @30^oC - 120-160 Sec. by B-4 cup(IS-3944)
• Specific Gravity @30^oC - 0.95 – 1.10 (Dependent on shade)
• Volume Solid% - 45 – 55 % (Dependent on shade)
• Drying Time - Surface Dry: Max 2 hrs. @30^oC & RH 60 ± 5% - Recoating - Min. 8 hrs.
• Finish - Smooth & Glossy
• Recommended Thinning - Up to 20% by volume using Glorious General Purpose Thinner & For one coat finish up to 10% by volume using Glorious General Purpose Thinner
• Flash Point - Not below 30^oC
• Stability of Thinned Paint - Use within 24 hrs.
• Shelf-life - 1 year from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat.
• Applications - Wood, Metal & Walls Surfaces for Interior & Exterior
• Actual coverage may vary depending on Method & Condition of Application, Surface Roughness & shad

Safety Features : Flammable.

Pack Sizes : 20ltr.

Shade Range : As per shade card & Customer Requirements.

We have a well-developed all the in-house storage facility, laced with all the modern facilities. Also, we have hired a team of professionals who efficiently manage and maintain it. Renowned for our outstanding patron care support, we have become a distinguished supplier of Glorious Red Oxide Primer in the market.

Unique Features & Benefits :

• Ease of Application
• Excellent durability
• Good Corrosion Resistance
• Super silky and Glossy finish.
• Excellent flow characteristics to form smooth and uniform finish
• Excellent color and color retention
• Excellent coverage

Surface Preparation :

• Prepare the surface by sanding with emery paper. First thinned the Glorious Red Oxide Primer to obtain brushing consistency by using Thinner. Apply a single coat and allow to dry.
• After first coat for smoothen surface used Glorious Synthetic Putty to fill dents of Surfaces than allow it to dry. Now apply second coat of Glorious primer to avoid patchy appearance. Sand with emery paper before application of topcoat with Glorious Enamel Paint. It is recommended on rough metal surfaces like steel furniture, Castings, Vehicles, etc. to give protection against corrosion.

Precautions :

• Store in well ambient conditions, Ventilated locations & away from the source of ignition and fire.
• Keep away from children.
• In case of eye/skin contact washes with plenty of water.
• Inhalation / Injection will cause danger. In case move to fresh air & consult medical practitioners in both the cases.
• Do not apply when ambient temperature might drop to level below 10^oC within 4 hrs of application.
• Avoid extra thinning for better results.
• The container must be tightly closed when not in use. Stir well and strain before use.
• Use safety equipments like rubber or polythene gloves, safety goggles / glasses & face mask.

Technical Data :

• Coverage** - On Smooth and non-absorbent surface. 120- 150 sq.ft/Ltr/coat.
• Drying Time - Surface Dry - 30min. @27 ± 2^oC & RH 60 ± 5% Recoating - Min 8 Hours
• Finish - Matt.
• Recommended Thinning - Up to 10% by volume using Glorious General Purpose Thinner
• Flash Point - Not below 30^oC
• Stability of Thinned Paint - Use within 24 hrs.
• Shelf-life - 1 year from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat.
• Application  - Steel Furniture, Castings, Vehicles & Metal Surfaces.
• Actual coverage may vary depending on Method & Condition of Application, Surface Roughness & shade.

 

Safety Features : Flammable.

Pack Sizes : 1ltr, 10ltr & 20ltr.

Shade Range : As per shade card.

Catering to the ever-evolving packaging requirements of the clients, we make certain that our professionals use only the finest packaging material to circumvent loss during transit. In order to deliver qualitative lot of products, we have hired a team of quality examiners who strictly check the product quality at several stages.

Unique Features & Benefits :

• Ease of Application
• Smooth & Matt finish
• Faster drying
• Excellent coverage

Surface Preparation :

• Prepare the surface by sanding with emery paper-180 and wipe clean. Ensure that surface is clean, dry and free from all loose or poorly adhering friable material, dirt, grease, max, etc. All structural cracks must be filled with cement putty and insure that there are no any leakages of water before painting and also cleaned out the any fungus affected area.
• Application of Glorious Expression Interior Primer to thinned it for obtain brushing consistency by using water to dilute. This application gives smooth finish.

Precautions :

• Store in well ambient conditions, Ventilated locations & away from the source of ignition and fire.
• Keep away from children.
• In case of eye/skin contact washes with plenty of water.
• Inhalation / Injection will cause danger. In case move to fresh air & consult medical practitioners in both the cases.
• Do not apply when ambient temperature might drop to level below 10^oC within 4 hrs of application.
• New plaster should be allowed to cure for minimum 12 weeks.
• Can be tinted with Universal Stainer before thinning. Do not add more than 5% of Universal Stainer, Stir well tinted paint after tinting & before application.
• Avoid extra thinning for better results.
• The container must be tightly closed when not in use. Stir well and strain before use.
• Use safety equipments like rubber or polythene gloves, safety goggles / glasses & face mask.

Technical Data :

• Coverage - On Smooth and non-absorbent surface. 110- 140 sq. ft/ltr/coat.
• Drying Time Surface Dry - 30 minutes @27 ± 2^oC &  RH 60 ± 5% - Recoating - After 4 – 5 hours
• Finish  -  Sheen
• Recommended Thinning  - 30 – 50% by volume using water
• Flash Point - NA
• Stability of Thinned Paint : Use within 24 hrs.
• Shelf-life  - 2 year from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat.
• Actual coverage may vary depending on Method & Condition of Application, Surface Roughness & shade.

Safety Features : Non-Flammable.

Pack Sizes : 1 Ltr., 4 Ltr., 10 Ltr. & 20 Ltr.

Shade Range : As per shade card or customer requirements.

In order to meet urgent and voluminous requirements of the customers, we have installed all the in-house facility at our premises. Laced with modern facilities, it helps us in securing the product line from factors like, moisture, dust, sunlight, etc. We promise to deliver the orders within the postulated time frame as we are backed by excellent logistics facility.

Unique Features & Benefits :

• Excellent Exterior durability
• Ease of Application
• Excellent washability
• Smooth & Matt finish
• Faster drying
• Excellent resistance to fungal and algae growth
• Excellent coverage.

Surface Preparation :

• Prepare the surface by sanding with emery paper-180 and wipe clean. Ensure that surface is clean, dry and free from all loose or poorly adhering friable material, dirt, grease, max, etc. All structural cracks must be filled with cement putty and insure that there are no any leakages of water before painting and also cleaned out the any fungus affected area.
• Application of Glorious Expression Duro Exterior Emulsion paint to thinned it for obtain brushing consistency by using water to dilute. Allow first coat to dry before applying another coat. Apply 2-3 coats; this application gives silky smooth finish, with excellent washability, durability.

Precautions :

• Store in well ambient conditions, Ventilated locations & away from the source of ignition and fire.
• Keep away from children.
• In case of eye/skin contact washes with plenty of water.
• Inhalation / Injection will cause danger. In case move to fresh air & consult medical practitioners in both the cases.
• Do not apply when ambient temperature might drop to level below 10^oC within 4 hrs of application.
• New plaster should be allowed to cure for minimum 12 weeks.
• Can be tinted with Universal Stainer before thinning. Do not add more than 5% of Universal Stainer, Stir well tinted paint after tinting & before application.
• Avoid extra thinning for better results.
• The container must be tightly closed when not in use. Stir well and strain before use.
• Use safety equipments like rubber or polythene gloves, safety goggles / glasses & face mask.

Technical Data :

• Coverage - On Smooth and non-absorbent surface. 130- 150 sq.ft/Ltr/coat.
• Drying Time - Surface Dry - 15-30 minutes @27 ± 2^oC & RH 60 ± 5% Recoating - After 4 – 5 hours
• Finish - Smooth
• Recommended Thinning - 30 – 50% by volume using water
• Flash Point - NA(non-flammable water based paint)
• Stability of Thinned Paint - Use within 24 hrs.
• Shelf-life - 2 year from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat.
• Actual coverage may vary depending on Method & Condition of Application, Surface Roughness & shade.

Safety Features : Non-Flammable.

Pack Sizes : 1 Ltr, 4 Ltr & 10 Ltr.

Shade Range : As per shade card.

Our comprehensive range of products is packed in sturdy, safe, and industrial grade materials that safeguard the contents inside from harm, dampness, dust, movement etc. Besides, the packing has printed product information. With us, payment transactions will always remain secured, as we have adopted modern payment procedures that guarantee instant and hassle-free transactions. Ease of Application, mooth finishSurface Preparation : Prepare the surface by sanding with emery paper 180 and wipe clean. Apply first coat of Glorious Wall Primer and allow to dry. Than apply the Glorious Wall Putty to fill dents, allow to dry. Than sand by using emery paper-180 for smoothen the surface.

By keeping records of the clients' requirements, we have developed a system that offers several options for transferring money from one end to another. We make certain that the offered array of products is sternly tested for the raw material as well. This makes our offered array of products completely reliable and genuine.

Surface Preparation :

• Prepare the surface by sanding with emery paper. First thinned the Glorious Red Oxide Primer to obtain brushing consistency by using Thinner. Apply a single coat and allow to dry.
• After first coat for smoothen surface used Glorious Synthetic Putty to fill dents of Surfaces than allow it to dry. Now apply second coat of Glorious primer to avoid patchy appearance. Sand with emery paper before application of topcoat with Glorious Enamel Paint. It is recommended on rough metal surfaces like steel furniture, Castings, Vehicles, etc. to give protection against corrosion.

Precautions :

• Store in well ambient conditions, Ventilated locations & away from the source of ignition and fire.
• Keep away from children.
• In case of eye/skin contact washes with plenty of water.
• Inhalation / Injection will cause danger. In case move to fresh air & consult medical practitioners in both the cases.
• Do not apply when ambient temperature might drop to level below 10°C within 4 hrs of application.
• Avoid extra thinning for better results.
• The container must be tightly closed when not in use. Stir well and strain before use.
• Use safety equipments like rubber or polythene gloves, safety goggles / glasses & face mask.

Technical Data :

• Coverage - On Smooth and non-absorbent surface. 120- 150 sq.ft/Ltr/coat.
• Drying Time - Surface Dry - 30min. @27 ± 2^oC & RH 60 ± 5% Recoating - Min 8 Hours
• Finish - Matt.
• Recommended Thinning - Up to 10% by volume using Glorious General Purpose Thinner
• Flash Point - Not below 30^oC
• Stability of Thinned Paint - Use within 24 hrs.
• Shelf-life - 1 year from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat.
• Application  - Steel Furniture, Castings, Vehicles & Metal Surfaces.
• Actual coverage may vary depending on Method & Condition of Application, Surface Roughness & shade.

Safety Features : Flammable.

Pack Sizes : 1ltr, 10ltr & 20ltr.

We are instrumental in offering extensive range of products that is in compliance with the internationally accepted standards. Thus, the final products are of excetional quality. Supported by an ultramodern packaging unit, we pack our products with premium materials and ensure their longevity. Courtesy our unit, we can provide customized packaging solutions too.

Unique Features & Benefits :

• Excellent durability
• Permanently seals small holes inherent in castings.
• Good dry time, enabling quick handling.
• Product can be applied by dip, spray or brush coats.
• Excellent flow characteristics to form smooth and uniform finish
• Excellent coverage
• Good corrosion Resistance
• Good weather and water resistance

Surface Preparation : All surfaces should be thoroughly cleaned before painting. Blast clean substrate and Clean by wire brushes and sure that there is no any greases or oil present on surface. Always use clean brushes or spray gun. Casting Sealer must be thinned by using thinner to obtain spraying consistency for better application. It is recommended on casting surfaces.

Technical Data :

• Drying Time - Surface Dry - Max 1 hrs. @30 ± 2^oC & RH 60 ± 5%
• Specific Gravity @30^oC - 1.1-1.3 gm/ml
• Supply Viscosity @30^oC - 120-150sec. by B-4 cup(IS-3944)
• Finish - Matt
• Recommended Thinning - Up to 20% by volume using Glorious Thinner
• Flash Point - Not below 30^oC
• Stability of Thinned Paint - Use within 24 hrs.
• Shelf-life - 1 year from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat.
• Applications - Ferrous & non Ferrous Casting Surfaces
• Application Methods - Spraying, Dipping or Brushing
• Actual coverage may vary depending on Method & Condition of Application, Surface Roughness & shade.

Pack Sizes : 20ltr.

Raw materials are the essential bottleneck assets that are highly important for the production of the finished goods. Thus, we stringently check the inputs before procurement. We ensure that the packing of the products remain intact and there will be zero damage while handling, warehousing and transit. For this, we make use of high quality packaging material.

Unique Features & Benefits :

• Excellent durability
• Ease of Application
• Good Corrosion Resistance
• Super silky and Semi Glossy finish.
• Excellent flow characteristics to form smooth and uniform finish
• Excellent color and color retention
• Excellent coverage

Surface Preparation :

• All surfaces should be thoroughly cleaned before painting. Loose and flaking paints should be removed by wire brushes and sure that there is on any greases or oil present on surface. Use clean brushes which were wash with suitable thinner.
• Before application of Glorious Enamel first apply Glorious Primer & Putty for better performance. Enamel paint must be thinned by using thinner to obtain brushing consistency for better application. Allow first coat to dry before applying another coat. It is recommended on wooden surfaces like doors, windows, cabinets; on metal surfaces like grills and gates, and on masonry and metal surfaces. It gives Glossy smooth finish.

Precautions :

• Store in well ambient conditions, Ventilated locations & away from the source of ignition and fire.
• Keep away from children.
• In case of eye/skin contact washes with plenty of water.
• Inhalation / Injection will cause danger. In case move to fresh air & consult medical practitioners in both the cases.
• Do not apply when ambient temperature might drop to level below 10^oC within 4 hrs of application.
• Avoid extra thinning for better results.
• Can be tinted with Universal Stainer before thinning. Do not add more than 5% of Universal Stainer, Stir well tinted paint after tinting & before application.
• The container must be tightly closed when not in use. Stir well and strain before use.
• Use safety equipment’s like rubber or polythene gloves, safety goggles / glasses & face mask.

Technical Data :

• Coverage - On Smooth nonabsorbent surface. 140 – 180 sq. ft/ltr/coat.
• Supply Viscosity @30^oC - 120-160 Sec. by B-4 cup(IS-3944)
• Specific Gravity @30^oC - 0.95 – 1.10 (Dependent on shade)
• Volume Solid% - 45 – 55 % (Dependent on shade)
• Drying Time - Surface Dry: Max 2 hrs. @30^oC & RH 60 ± 5% - Recoating - Min. 8 hrs.
• Finish - Smooth & Glossy
• Recommended Thinning - Up to 20% by volume using Glorious General Purpose Thinner & For one coat finish up to 10% by volume using Glorious General Purpose Thinner
• Flash Point - Not below 30^oC
• Stability of Thinned Paint - Use within 24 hrs.
• Shelf-life - 1 year from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat.
• Applications - Wood, Metal & Walls Surfaces for Interior & Exterior
• Actual coverage may vary depending on Method & Condition of Application, Surface Roughness & shad

Safety Features : Flammable.

Pack Sizes : 20ltr.

Shade Range : As per shade card & Customer Requirements.

Our comprehensive range of products is packed in sturdy, safe, and industrial grade materials that safeguard the contents inside from harm, dampness, dust, movement etc. Besides, the packing has printed product information. With us, payment transactions will always remain secured, as we have adopted modern payment procedures that guarantee instant and hassle-free transactions.

Unique Features & Benefits :

• Ease of Application
• Smooth finish

Surface Preparation : Prepare the surface by sanding with emery paper – 180 and wipe clean. Apply first coat of Glorious Wall Primer and allow to dry. Than apply the Glorious Wall Putty to fill dents, allow to dry. Than sand by using emery paper-180 for smoothen the surface.

Precautions :

• Store in well ambient conditions, Ventilated locations & away from the source of ignition and fire.
• Keep away from children.
• In case of eye/skin contact washes with plenty of water.
• Inhalation / Injection will cause danger. In case move to fresh air & consult medical practitioners in both the cases.
• Do not apply when ambient temperature might drop to level below 10^oC within 4 hrs of application.
• New plaster should be allowed to cure for minimum 12 weeks.
• Avoid extra thinning for better results.
• The container must be tightly closed when not in use. Stir well and strain before use.Use safety equipments like rubber or polythene gloves, safety goggles / glasses & face mask.

Technical Data :

• Coverage - On Smooth and non-absorbent surface. 120- 160 sq.ft/Ltr/coat.
• Drying Time - Surface Dry - 15-30 minutes @27 ± 2^oC & RH 60 ± 5% Recoating - After 3 – 4 hours
• Finish - Smooth.
• Recommended Thinning - Add 5 %  of Water in 1 Kg as per required.
• Flash Point - NA(non-flammable water based paint)
• Stability of Thinned Paint - Use within 24 hrs.
• Shelf-life - 2 year from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat.
• Application - On Smooth and non-absorbent surface.
• Actual coverage may vary depending on Method & Condition of Application, Surface Roughness & shade.

Safety Features : Non-Flammable.

Pack Sizes : 2 kg, 5 kg, & 20 kg.

Shade Range : White

We are known for providing only flawless range of products as we store the entire lot under safe environment in our spacious warehouse. Moreover, the lot is regularly checked by our experts. For ensuring safety of the products during handling, warehousing and transportation, we make use of quality packing material. Moreover, the task of packaging is undertaken by the experts.

Unique Features & Benefits :

• Ease of Application
• Smooth finish

Surface Preparation : Prepare the surface by sanding with emery paper – 180 and wipe clean. Apply first coat of Glorious Wall Primer and allow to dry. Than apply the Glorious Wall Putty to fill dents, allow to dry. Than sand by using emery paper-180 for smoothen the surface.After than Apply Glorious  Acrylic Washable Distemper 2 to 3 coat for better performance.

Precautions :

• Store in well ambient conditions, Ventilated locations & away from the source of ignition and fire.
• Keep away from children.
• In case of eye/skin contact washes with plenty of water.
• Inhalation / Injection will cause danger. In case move to fresh air & consult medical practitioners in both the cases.
• Do not apply when ambient temperature might drop to level below 10oC within 4 hrs of application.
• New plaster should be allowed to cure for minimum 12 weeks.
• Avoid extra thinning for better results.
• The container must be tightly closed when not in use. Stir well and strain before use.
• Use safety equipments like rubber or polythene gloves, safety goggles / glasses & face mask.

Technical Data :

• Coverage - On Smooth and non-absorbent surface. 120- 160 sq.ft/Ltr/coat.
• Drying Time - Surface Dry - 30 minutes @27 ± 2oC & RH 60 ± 5% Recoating - After 3 – 4 hours
• Finish - Smooth.
• Recommended Thinning - Add 20 %  of Water in 1 Kg as per required.
• Flash Point - NA(non-flammable water based paint)
• Stability of Thinned Paint - Use within 24 hrs.
• Shelf-life - 2 year from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat.
• Application - On Smooth and non-absorbent surface.
• Actual coverage may vary depending on Method & Condition of Application, Surface Roughness & shade.

Safety Features : Non-Flammable.

Pack Sizes : 2 kg, 5 kg, & 20 kg.

Shade Range : White

We procure the basic material, required for manufacturing flawless lot of products, from the genuine and authorized vendors only. As a result of which, our offerings have no match in the market. We are a reliable name when it comes to high quality Glorious Expression Economy Exterior Emulsion at competitively low prices.

Unique Features & Benefits :

• Economical and durable coating
• Ease of Application
• Smooth & Matt finish
• Faster drying
• Good resistance against fungus growth
• Good coverage

Surface Preparation :

• Prepare the surface by sanding with emery paper-180 and wipe clean. Apply first coat of Glorious Wall Primer and allow to dry. Than apply the Glorious Wall Putty to fill dents, allow to dry. Than sand with emery paper – 180 for smoothen the surface and. Apply second coat of primer, allow to dry, sand with emery paper-320 or 400 and apply Glorious Expression Economy Exterior Emulsion.
• Application of Glorious Expression Economy Exterior Emulsion paint to thinned it for obtain brushing consistency by using water to dilute. Allow first coat to dry before applying another coat. Apply 2-3 coats; this application gives smooth finish, with good washability.

Precautions :

• Store in well ambient conditions, Ventilated locations & away from the source of ignition and fire.
• Keep away from children.
• In case of eye/skin contact washes with plenty of water.
• Inhalation / Injection will cause danger. In case move to fresh air & consult medical practitioners in both the cases.
• Do not apply when ambient temperature might drop to level below 10^oC within 4 hrs of application.
• New plaster should be allowed to cure for minimum 12 weeks.
• Can be tinted with Universal Stainer before thinning. Do not add more than 5% of Universal Stainer, Stir well tinted paint after tinting & before application.
• Avoid extra thinning for better results.
• The container must be tightly closed when not in use. Stir well and strain before use.
• Use safety equipments like rubber or polythene gloves, safety goggles / glasses & face mask.

Technical Data :

• Coverage - On Smooth and non-absorbent surface. 150- 200 sq.ft/Ltr/coat.
• Drying Time - Surface Dry - 30 minutes @27 ± 2^oC & RH 60 ± 5% Recoating - After 3 – 4 hours
• Finish - Matt
• Recommended Thinning - 50 – 70% by volume using water
• Flash Point - NA(non-flammable water based paint)
• Stability of Thinned Paint - Use within 24 hrs.
• Shelf-life - 2 year from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat.
• Actual coverage may vary depending on Method & Condition of Application, Surface Roughness & shade.

Safety Features : Non-Flammable.

Pack Sizes : 1 Ltr, 4 Ltr, 10 Ltr.& 20 Ltr.

Shade Range : As per shade card or Customer Requirements.

To stock our product for wholesale distribution, we have a state-of-the-art storage facility equipped with the latest inventory control management system. It enables us to meet bulk or retail requirements with ease. The material required for preparing quality-centralized product range is sourced from the trusted places and that too after complete quality confirmation.

Unique Features & Benefits :

• Economical and durable coating
• Ease of Application
• Good Washability
• Smooth & Matt finish
• Faster drying
• Good resistance against fungus growth
• Good coverage

Surface Preparation :

• Prepare the surface by sanding with emery paper-180 and wipe clean. Apply first coat of Glorious Wall Primer and allow to dry. Than apply the Glorious Wall Putty to fill dents, allow to dry. Than sand with emery paper – 180 for smoothen the surface and. Apply second coat of primer, allow to dry, sand with emery paper-320 or 400 and apply Glorious Expression premium Interior Emulsion.
• Application of Glorious Expression premium Interior Emulsion paint to thinned it for obtain brushing consistency by using water to dilute. Allow first coat to dry before applying another coat. Apply 2-3 coats; this application gives smooth finish, with good washability

Precautions :

• Store in well ambient conditions, Ventilated locations & away from the source of ignition and fire.
• Keep away from children.
• In case of eye/skin contact washes with plenty of water.
• Inhalation / Injection will cause danger. In case move to fresh air & consult medical practitioners in both the cases.
• Do not apply when ambient temperature might drop to level below 10^oC within 4 hrs of application.
• New plaster should be allowed to cure for minimum 12 weeks.
• Can be tinted with Universal Stainer before thinning. Do not add more than 5% of Universal Stainer, Stir well tinted paint after tinting & before application.
• Avoid extra thinning for better results.
• The container must be tightly closed when not in use. Stir well and strain before use.
• Use safety equipments like rubber or polythene gloves, safety goggles / glasses & face mask.

Technical Data :

• Coverage - On Smooth and non-absorbent surface. 220- 260  sq.ft/Ltr/coat.
• Drying Time - Surface Dry - 30 minutes @27 ± 2^oC & RH 60 ± 5% Recoating - After 3 – 4 hours
• Finish - Matt
• Recommended Thinning - 50 – 70% by volume using water
• Flash Point - NA(non-flammable water based paint)
• Stability of Thinned Paint - Use within 24 hrs.
• Shelf-life - 2 year from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat.
• Actual coverage may vary depending on Method & Condition of Application, Surface Roughness & shade.

Safety Features : Non-Flammable.

Pack Sizes : 1 Ltr, 4 Ltr, 10 Ltr.& 20 Ltr.

Shade Range : As per shade card or Customer Requirements.