Global Technology & Research

Karol Bagh, Delhi

Zhiyun Smooth-x Joystick Main Plate For Repairing

FM40 is an ultra-compact wireless microphone system with an innovative clip-in function and incredibly Smaller in Size. The transmitter features an in-built omnidirectional condenser capsule and can be used as a clip-on mic or with a lavalier, sending crystal-clear, Uncolored Professional grade audio with true diversity digital transmission to the on-camera or smartphone receiver. FM40 is the perfect wireless mic solution for content creators, filmmakers, on-camera presenters, newsgatherers, vloggers and many more. Shijiazhuang FeiDu Technology Co., Ltd is a pioneer on R&D and production of wireless microphone. Providing high quality, affordable photographic equipment for film and television practitioners is the original intention of the company's founder to create FeiDu Technology Co. Ltd FM40 is upgraded version of FM50 and FM60.

feelworld f6 plus : it is feelworld newest improve user experience design, make all controls around your fingers!

the f6 plus is the perfect monitor for those who need an easy-to-use utility on-camera monitor such as gimbal operators, or shooters who are always on the go.

f6 plus camera field monitor features with an interactive touch screen that makes setting up incredibly intuitive, as well as custom 3d luts loading that enables you to deliver more stunning works.

monitoring tools with quick accessibility:

it's small, lightweight and has great image quality.

let your video shooting become easier

feelworld monitor is a must-have accessory for your shooting setup.

when youve put together rigs made up of powerful equipment, you want to be able to see shots that so much work has now gone into getting to that point. no matter the setup, whether its a shoulder rig, gimbal, tripod, or handheld, you need a feelworld monitor for all your setups which allow you to see, in perfect definition, make sure your shot in focus and accurate exposure, what you are shooting so that you know that the shot you are working hard to get is truly stellar.

easy multi-angle monitoring

its not easy to evaluate your shot solely through your cameras built-in monitor, especially if the entire unit is constantly rotating on a gimbal/ stabilizer, the camera on crane rig jib, one of the biggest issues when you are doing low-angle/ high angle shot is monitoring what youre shooting. feelworld monitor is ideal tool for you to monitor the scene since you can install it where you can conveniently see it.

some cameras can't show images when connect the monitor , please don't worry , just please disconnect the monitor , and set your camera . menu-setup menu-hdmi-device control-off

1. can't turn on the monitor

make sure to use the standard 12v 1.5a power adapter to connect the monitor. if power is supplied by battery, please check if the battery is fully charged.

2.have noise during recording

long press

Zhiyun Smooth-x X Motor Assembly (grey) For Repairing

2.5ft High Stable Slow Motion 360 Video Booth 360 Photo Booth 360 Video Spinner Video Spinny

with thehdmi wireless video receiverfromzhiyun, you can receive high-definition, low-latency 1080p30 video from a transmount transmitter from up to 328' away. the transmitter is capable of transmitting video simultaneously to up to three receivers.
the transmount receiver features an hdmi type a output which supports up to 1080p30 video, and it receives up to 1080p30 over wi-fi. power is provided by the integrated 1400mah battery, which is charged using the micro-usb input/output port and lasts approximately 1.5 hours on a full charge. the receiver unit can be secured to a mount or stand via the included mounting plate and shoe mount.

features

• 328' maximum range
• video transmission and hdmi output up to 1080p30
• transmitter can send video to up to three receivers simultaneously
• 60 ms low latency
• wi-fi wireless transmission protocol
• micro-usb charging
• mounting plate and shoe mount

FeelWorld LIVEPRO L1Overview

• Video switcher with four HDMI inputs and one HDMI output
• Up to 1080p60 video input and output support
• 2" TFT display with live preview, 6-picture PVW (preview) and PGM (program) output over HDMI
• Auto cut and 14 manual transitions supported with center T-bar
• UVC-compliant USB video output for live streaming
• Embedded audio or via external source via 3.5mm analog audio input
• 3.5mm analog audio output jack
• Control using manual controls and buttons or via a PC or smartphone app
• PiP (Picture-in-Picture) support
• Optional DSK and PTZ camera control

Zeapon Micro 2 Micro Rail Slider

The Micro 2 achieves its extended length travel via a dual-slide design. The slider works at the push of your hand. As you manually push the rails, the belt in the center pulls the camera platform a distance of 11". At the same time, the rails themselves move in the same direction but at a slower pace. Ultimately, after the camera platform reaches the end of its road, the rails will still be moving, until they reach the end of their road. Altogether, you get 21" of movement, about double the length of the handy slider. And at no point do the rails and camera platform overlap in such a way that rails are picked up by the lens. Also, all the movement is achieved with fluid-damping-based friction technology which ensures that the motion is smooth and consistent, in accordance with how much pressure you apply when pushing.

Key Features

• 13" length, 21" travel distance
• Fluid-damping-based friction technology
• 36 ball bearings for better pulley movement
• Polymer pulleys allowing a payload of 17.5 lb
• High-strength, fiber-reinforced rubber pulley belts
• Dust stoppers on each side of the slider keep dust and dirt from getting into the area where the bearings are; they also clear any dust away from the rails themselves every time a slide is performed
• 1/4"-20 mounting screw for ball head/tripod head attachment
• 3/8"-16 tripod mount thread (3/8"-16 to 1/4"-20 reducer included)
• Aircraft-grade aluminum construction
• Locking mechanismlock buttons on the side of the center component lock the slider and keep the rails from moving between shoots

Zeapon EasyLock 2 Low-Profile Mount with Ball Head

TheZeapon EasyLock 2is designed for a few purposes. It can be used as a stand for the Zeapon Micro 2 Micro Rail Slider, sold separately, in order to support the slider on desktop and ground surfaces. Or it can be used as a low-profile desktop/ground support for your camera alone, in place of something like a mini tripod or a low hat. In either case, its tiltable feet can be adjusted to compensate for slightly uneven surfaces. Also, the EasyLock provides a convenient way of moving the slider or the camera from a tripod directly to a desktop/ground surface. Included with the EasyLock is an Arca-Swiss compatible quick release plate that makes tripod mounting even more convenient. An Allen key-type wrench for the plate is supplied that comes fixed hidden on the bottom of the EasyLock. Also included is a tilt and swivel ball head. When the EasyLock is used with the slider, the ball head can be mounted on top of the slider to support a camera. When the EasyLock is used with a camera only, the ball head can be used to support the camera. The EasyLock has a weight capacity of 33 lb while the ball head supports up to 17.5 lb.

perform smooth, quiet camera slides using your micro 2 slider with themotor modulefromzeapon. the motor module features a near-silent 39 db motor that can move up to 9.9 lb up and down the slider track.

the motor module features three speed settings that can be controlled wirelessly using the zeapon smartphone app for ios or android. the app also allows you to configure settings and select presets such as time-lapse, night-lapse, city-lapse, and more. the motor also has a 2.5mm port that allows you to control the start/stop or shutter of your camera using a separately available cable.

the module is powered using a separately available l-series battery that can be charged using its usb type-c port. the module can run up to 14 hours using a high-capacity np-970 battery. the port supports pd charging, and it can also be used to upgrade the unit's firmware. a charging cable is included, as well as a screwdriver and the equipment required to mount the motor module onto the slider.

• motor module compatible with the zeapon micro 2 slider
• capable of moving a 9.9 lb load capacity along the slider
• android and ios wireless app support
• quiet 39 db motor
• features three speeds and can operate in both directions along the slider
• time-lapse and night-lapse support
• pd-compatible usb type-c charging port, also used for upgrades
• compatible with separately available l-series battery; runtime up to 14 hours using a high-capacity np-f970 battery
• video start/stop and photo shutter 2.5mm control port

in a very compact designjust 13" longthemicro 2 micro rail sliderfromzeaponallows you to perform smooth manual slides across a travel distance of 21". it's small enough to fit in most bags, and it can be used for close-up and mid-range shots with loads up to 17.5 lb.
the micro 2 achieves its extended length travel via a dual-slide design. the slider works at the push of your hand. as you manually push the rails, the belt in the center pulls the camera platform a distance of 11". at the same time, the rails themselves move in the same direction but at a slower pace. ultimately, after the camera platform reaches the end of its road, the rails will still be moving, until they reach the end of their road. altogether, you get 21" of movement, about double the length of the handy slider. and at no point do the rails and camera platform overlap in such a way that rails are picked up by the lens. also, all the movement is achieved with fluid-damping-based friction technology which ensures that the motion is smooth and consistent, in accordance with how much pressure you apply when pushing.
the slider offers a 1/4"-20 mounting screw where you can attach a 1/4"-20 compatible ball head or tripod head. on the bottom, it provides a 3/8"-16 tripod mount thread, and a 3/8"-16 to 1/4"-20 reducer is included, so you get compatibility with just about all tripods and other camera supports on the market. the micro 2 slider can be used mounted on a tripod horizontally, slanted, or vertically, allowing you to perform a comprehensive variety of smooth shots with a highly portable slider.
while many other sliders have built-in feet, the micro 2 slider supports a low-profile mounting platform called easylock, sold separately. functioning like a multifeatured stand, this foldable add-on provides great flexibility in using the micro 2 directly on a desktop or on the ground, even on uneven surfaces, while allowing the slider to maintain its dual-slide design.

key features

• 13" length, 21" travel distance
• fluid-damping-based friction technology
• 36 ball bearings for better pulley movement
• polymer pulleys allowing a payload of 17.5 lb
• high-strength, fiber-reinforced rubber pulley belts
• dust stoppers on each side of the slider keep dust and dirt from getting into the area where the bearings are; they also clear any dust away from the rails themselves every time a slide is performed
• 1/4"-20 mounting screw for ball head/tripod head attachment
• 3/8"-16 tripod mount thread (3/8"-16 to 1/4"-20 reducer included)
• aircraft-grade aluminum construction
• locking mechanismlock buttons on the side of the center component lock the slider and keep the rails from moving between shoots

with thehdmi wireless video transmitterfromzhiyun, you can transmit high-definition, low-latency 1080p30 video to a transmount receiver up to 328' line of sight. the transmitter is compatible with the weebill-s stabilizer, allowing camera control through the stabilizer while wirelessly transmitting your video. the transmitter is capable of transmitting video to up to three devices.
the transmount transmitter features an hdmi type a input which supports up to 1080p60 video, and it transmits up to 1080p30 over wi-fi. power is provided by the integrated 1400mah battery, which is charged using the micro-usb input/output port and lasts approximately 1.5 hours on a full charge. the micro-usb port also acts as a camera control port for various camera types, and a sony-specific camera control port provides camera control for sony cameras. micro-usb, mini-usb, usb type-b, and usb type-c camera control cables are included with the transmitter.
the transmitter unit can be secured to a mount or stand via the included mounting plate and four m2.5 screws.

camera compatibility

• nikon d850
• canon 5d mark iv, 6d mark ii, eos r
• panasonic gh5
• nikon z6
• sony a7r iii

features

• 328' maximum transmission range
• hdmi input up to 1080p60
• transmit to up to three receivers
• 60 ms low latency
• video transmission up to 1080p30
• wi-fi wireless transmission protocol
• micro-usb charging and control port
• sony camera control port
• usb camera control cables included
• mounting plate with m2.5 screws

2.5ft 360 video spinner video spinny with 360 degree slow motion video booth for birthdays

Zhiyun Smooth-x Z Motor Assembly (grey) For Repairing

2.5ft Video Spinny Rotating 360 Degree Slow Motion Video Photo Booth Video Spinner for Parties

themotion sensor remote control for weebil-sfromzhiyunenables you to view and control your camera while the stabilizer itself is out of reach or to split control between an operator and a camera assistant. this controller requires the use of a professional video monitor and the separately available transmount transmitter and receiver. it includes an extension plate that connects to your monitor so that the controller acts as a handgrip.

the controls on the remote control include a four-way directional joystick, a menu dial, and motion sensor, start/stop recording, reset, mode, live preview, menu, shutter, and power buttons. it also incorporates a zoom slider and a focus/zoom control wheel for use with select cameras or the separately available transmount servo focus/zoom controller.

the transmount motion sensor remote control for weebil-s has an approximate five-hour runtime and can be charged and updated via its usb type-c port.

features

• video transmission and gimbal control when paired with the transmount transmitter and receiver and your pro video monitor
• handgrip-style control mounts on your monitor via the included support
• focus and zoom control for select cameras using the separately available transmount servo focus/zoom controller

key features

• weebill-s control & video transmission
• joystick & button control
• requires transmount image tx & rx
• requires pro handheld video monitor

be a pro: when it comes to image quality, the one piece of gear everyone recommends is zoompod multifunctional monopod . with its stable camera support opens up all sorts of possibilities in terms of low-light shooting, long exposures, panning shots, panoramas and many more.

highlights

• quick release camera mode
• 360 camera rotation
• section extension
• quick release tripod base
• foldable leg

Featuring a 1/2.6" CMOS sensor, this 3-axis stabilizer and camera keeps your shot smooth and provides 3x digital zoom and up to 4x slow-motion shooting, as well as additional preset shooting modes to create shake-free looking videos. The integrated touchscreen enables rapid menu navigation and setting adjustment, while the built-in joystick allows you to pan and tilt while shooting.

Weighing just over 5 ounces, this all-in-one unit features a 3-axis gimbal stabilizer for smooth movement and easy pan-and-tilt control. The camera has a 14mm equivalent lens with a 128 angle of view. The integrated battery will run for just over five hours when shooting at 1080p with the Wi-Fi powered and connected, allowing for app control. You can record up to 4K30 video at 100 Mb/s and 12MP still photos onto a microSD card up to 256GB in capacity. The built-in noise-canceling microphone provides clear sound, and the gimbal has a mic input port for an external microphone.