Our Products
Valves & Valve Fittings
2 Products availableHydraulic & Pneumatic Tools
2 Products availableDrill & Boring Equipments
2 Products availableIndustrial Pump
2 Products availableConstruction Machinery & Equipment
2 Products availableElectric Converters
1 Products availableConcrete Equipment
1 Products availableOur product range contains a wide range of Multi Grapples, hydraulic compactor, drive units, screeds and Cast Valve
The poker is a good alternative for medium to high-slump concrete. Powerful and fast yet with a lower absorbed intensity that requires smaller converters. poker heads have a compact design thanks to bolt-on eccentric weights.
() Features available in POKER :Roller and needle bearing, Oil lubrication, Helical rotor, 5 m hose, Toggle switch box, EEC plug, Built in thermo switch.
Design Fully automatic pressure boosting units available in three variants - K, V & VP with 2 to 6 vertical highpressure pumps and fully electronic control of the required supply pressure with two standard voltfree contacts for fault indication. Applications ll Residential Buildings l Hospitals l Office Buildings l Hotels Departmental Stores and other applications
Fluid handled Drinking water, service water, fire-fighting water, cooling water, where there is no chemical and mechanical corrosive action on the system materials.
Control cabinet equipment (Standard) l Digital display with operating panel LEDs indicating operational availability and lsystem faults l Service interface for connection to a PC l Frequency inverter l Control transformer l Motor protection per pump l Master switch, lockable l Terminals with identification for all connections l Circuit diagram and part list for electrical parts Terminals for connecting analog or digital dry lrunning protection equipment Remote On/Off terminals
Standard system equipments l 2-6 Vertical high pressure pumps (std. pumps) l Hydraulic components made of Stainless Steel l 1 check valve and 2 shut off Valves for each pump Pressure transmitter on the discharge pressure lside l Pressure indication via analog pressure gauge l Steel base plate CED (Cataphoresis) / Galvanised
With access to electricity the electric frequency converters of our CF series is however an easy choice. No fumes, less noise and lower weight are highly regarded features, as is stable power output. Atlas Copco offers rotary frequency converters fitted with steel frames curved upwards at each end to facilitate hand portability. Special versions with protected outlets for the precast industry are available upon request.
Altas Copco offers rotative frequency converters, equipped with 2 or 4 outlets, from 25 to 67 amps.
Applications:
Applications:
|
Double drum rollers are suitable for compacting thin layers on granular soils and asphalt. They are mostly used for small jobs, repair work and compaction in confined areas.
() Features available in BABY ROLLER :Fully hydraulic, Large removable water tank, Built-in oil cooler for increased lifetime of vital components, Heavy-duty protection frame with single lifting point for easy transportation, Minimum overhang and high curb clearance, Powerful engine for reliable operations.
Please observe that all button bits are manufactured over-sized 0, 51, 0 mm, meaning that for example a 36, 0 mm bit is at least 36, 5 mm as new. This is done because of the fast initial wear on button bits.
When it is of importance, also consider that the hole is always 1, 03, 0 mm bigger than the bit dimension depending on rock formation
Atlas Copco range of hydraulic compactors covers a broad spectrum of applications and customer needs. They are designed for compacting soil, trenches and slopes and also for driving and extracting piles.
With rig-mounted hydraulic compactors from Atlas Copco, there is no need for personnel in the direct area of operations, thus reducing noise and safety risks. Work in trenches in particular is made safer.
SPECIFICATION :Vertical fully flooded submersible motor with In built swing check valve. Jacket cooled single phase motor with integrated temperature switch. Float switch for automatic operation.
() APPLICATION :Suitable for lowering surface water level, transfer of water, agricultural pits, & sprinklers in gardens, drainage of cellars / basin.
Features available in AirROC D40W :
Rugged Chassis, Flexibility, Secure setup, Easy to move and transport,
Down-the-hole version, High-pressure air system.
The drive units are designed to run pokers equipped with genuine couplings. Set at 3000 rpm they provide enough speed to the pendulum poker to get 12000 vpm in the concrete.
() Features available in DRIVE UNITS :Lombardini diesel engine, Solid & light frame, Widely used coupling, Oil alert.
Especially designed to vibrate concrete from the outside of forms, the external vibrators are equipped with a quick release bracket. This allows them to be moved from one form to another during the concrete curing time. Good quality bearing contributes to a long lifetime of the vibrators.
() Features available in EXTERNAL VIBRATORS :Iron casted bod, lamella principle, High quality bearings, EEC plug
Screeds and toppings are commonly used as a means of providing smooth flat floors in residential, commercial and industrial buildings. Toppings may also be used to increase the structural depth and strength of the base slab.
() Features available in DRIVE UNITS :Quick Disconnect System, Low Profile Engine Option, Wide Range of Horsepower Options, Hydraulic Powered Winch is Optional, Manual Winch is Standard, Bolt-On Replaceable Blades, Triangular Frame with Vibration Proof Welds, Eccentric Vibrator Weights, Replaceable, Greaseable Bearings.
A trowel (also known as a "power float", "helicopter" or "trowel machine" or "whirlybird") is a piece of light construction equipment used by construction companies and contractors, to apply a smooth finish to concrete slabs.
Atlas copco Range of forward asphalt plates are specially designed for compacting asphalt. They are ideal and most economical for small repair and maintenance work, such as driveways, pathways and parking lots.
() Features available in PLATE COMPACTORS :Productivity speed, High Compaction, End result, Ergonomy Low Vibration Handle.
Low weight and high productivity characterizes all Atlas Copco hammers. A variety of models, with D-handles and either kick-latch or cap-type tool retainers, are available.
Features & benefits
Applications
Atlas Copco vibration dampened pick and chipping hammers are well-balanced and offer good chisel control. Compared to standard hammers, these models offer the operator a higher level of comfort and the same great performance, without adding unnecessary weight.
Applications
The TEX 32-40 models are heavy duty, general demolition breakers, used in a number of applications on medium hard to hard materials. They are well proven in both asphalt and concrete.
Features & benefits
Applications
The Atlas Copco RH rock drills are designed for bench drilling, secondary drilling and smooth blast drilling. The small size makes them ideal for work in confined spaces. Because of its light weight the RH 571 is best suited for smaller jobs. The RH 658 is slightly heavier and more powerful and can handle greater hole depths. The design of RH 572E combines light weight with extra comfort for the operator, thanks to the vibration dampened handles and the efficient silencer.
Applications
SPECIFICATION :Three-piece construction, Cast/Forged Steel, Floating Ball, Full/Regular Bore, Welded and Threaded Ends.
() APPLICATION :Process and general industry, For water, steam, gas, oil and other media, Further applications on request.
Start work straight away
Thanks to the built-in frequency converter, all you need to start working is a regular wall socket with the appropriate voltage.
Application :
Drilling Method :
Application :
Drilling Method :
Range : 2"to 6"
Designed for Construction, Quarry, Minning and Exploration drilling applications.
The Prisma 4 MV DTH hammer is a versatile tool with a wide application range. This hammer offers good penetration rates, longer service life and high level of reliability.
in remote locations, when high centrifugal force of the electric pokers is required, our engine driven frequency converters, or generators, is the perfect solution. With both diesel and petrol versions, supplying from 25A to 67A, youll easily find a drive unit to suit your daily needs. To further protect your investment a voltmeter that controls the generators working condition comes as standard on all models.
Features Applications Technical data and selection table Vertical, monobloc submersible pumpset. Free flow impellers of two sizes. 1 phase and 3 phase motors with IP 68 protection, class F insulation. 1 phase motor with built-in thermal overload protection and float switch. Bi-directional mechanical seal. Easy and less maintenance due to SS hardwares.
Pumping of surface water, rain water, waste water containing solids. Drainage of sumps liable to flooding. Drainage of basements, underground bunkers, cable trenches in industries, hotels etc. Municipal pits. Construction sites.
Operating Data Size DN 50 mm 3 Capacity Up to 29 m /hr Head Up to 16 m Motor Rating 1Ø - 1.1 kw / 3Ø - 1.5 kw
Applications llRefineries, Power stations, Process & General Industry lFor water, steam, gas, oil and other non-aggressive media Further applications on request Operating data lPressure range up to 103.4 bar (1500 psi) l 0 0 Temperature range up to +593 C/1100 F l 0 0 lMinimum temperature is 0 C (less than 0 C on request) Pressure-temperature ratings as per ASME B 16.34 Standard class Materials l 0 0 ASTM A 216 WCB from 0 C to 425 C l 0 0 ASTM A 217 WC6 from 0 C to 593 C l 0 0 ASTM A 351 CF8 from 0 C to 537 C Design llAs per API 600 lPressure, Temperature rating as per ASME B 16.34 lGraphite gaskets and graphite packings with Braided wiping rings Hard faced Seats (13% Cr / Ste
Variants on Request lllllll Remarks : (Type Series Booklet References) SICCA 800-2500 GTF / GLF / PCF : 7240.1/12-11 SICCA 900-2500 GTC : 7241.2/12-11 SICCA 900-2500 GLC : 7242.2/12-11 SICCA 900-2500 SCC : 7243.2/12-11 SICCA 150-600 GLC : 7245.2/12-11 SICCA 150-600 SCC : 7246.2/12-11 Operating instructions no. : 0500.80/05-18 G3 On all enquiries/orders please specify : 1. Type 8. Material of construction 2. ASME Pressure class 9. Flow Medium 3. Size 10. Flow rate Min. / Max. 4. Design pressure/temperature 11. Type of end connection 5. Operating pressure 12. Pipe Schedule, ID / OD 6. Operating temperature 13. Variants 7. Differential pressure 14. Type Series Booklet no. 15. Valve data sheet (if applicable) When ordering spares, indicate valve serial number. Bypass Arrangement Gear / Electrical Actuator Position indicator Locking Arrangement Lantern Ring Stem Protector Other Material of construction
The electric motor is very efficient owing to its newly developed
stator and rotor. Hand/arm vibration is also reduced thanks to the
new design. Low voltage reduces the risk of electric shock. Table
for low to medium slump concrete
Breaking, cutting and drilling capabilities . Ideal for the tamping, drilling, anchoring, asphalt and concrete cutting . Petrol driven, no need for cables, power packs, hoses or compressors . Easy to transport, use, maintain and service . Cuts capital, running, transport and storage costs
IBH - 10 BLASTHOLE DRILL CONTAINS :
() Operator friendly Control() Heavy Duty Undercarriage() Powerful Rotary Head() Operator's Cabin
SB HYDRAULIC BREAKER FEATURES TO INCREASE YOUR PRODUCTIVITY :
() Tough and reliable() A sleek body with a reliable soul() Easy to service() Fast tool change() Replace tool bushing on site
Carrier Weight Class | Tone | 0.7-1.1 | 1.1-3.0 | 1.9-4.5 | 2.5-6.0 | 4.5-9.0 | 6.5-13 | 9.0-15.0 |
Services Weight | kg | 55 | 90 | 140 | 200 | 300 | 440 | 520 |
Oil Flow | l/min | ,12-27 | 16-35 | 25-45 | 35-65 | 50-80 | 55-100 | 65-115 |
Operating Pressure | bar | 100-150 | 100-150 | 100-150 | 100-150 | 100-150 | 100-150 | 100-150 |
Impact rate | bpm | 750-1700 | 750-2300 | 850-1900 | 850-1800 | 600-1400 | 550-1250 | 650-1150 |
Working tool diameter | mm | 40 | 45 | 50 | 65 | 80 | 95 | 100 |
Working length of tool | mm | 255 | 250 | 250 | 300 | 440 | 470 | 475 |
Max.hydraulic input Power | kw | 7 | 9 | 11 | 17 | 20 | 25 | 29 |
Start up Mode | Auto Start | Auto Start | Auto Start | Auto Start | Auto Start | Auto Start | Auto Start | |
Sound Power level Guaranteed31(dB(A)) | 117 | 115 | 114 | 118 | 119 | 122 | 126 | |
Sound Pressure level (r=10m)31(dB(A)) | 89 | 87 | 85 | 90 | 91 | 94 | 97 | |
Part Number | 8460 0300 10 | 8460 0300 30 | 8460 0300 40 | 8460 0300 50 | 8460 0300 60 | 8460 0300 70 | 8460 0300 80 |
High centrifugal force and speed contribute to deep and effective compaction. These hard-hitting machines with all around capabilities are appreciated on applications such as repair jobs, trenches or foundations.
() Features available in RAMMER :multi-functional fuel tank featuring a breather shut-off, electrical shut-off, fuel shut-off and throttle control with three fixed positions (Stop/Idle/Run).
For excavators in range of 22 to 140 Tons capacity. | |
HB HYDRAULIC BREAKER FEATURES TO INCREASE YOUR PRODUCTIVITY :
() Less weight more power() Avoid indigestion() Auto Control() Vibro Silenced() Dust Protector
HB 2000 | HB 2500 | HB 3100 | HB 3600 | HB4100 | HB 4700 | HB 5800 | HB 7000 | HB10000 | ||
Carrier Weight Class | Tone | 22-38 | 27-46 | 32-52 | 35-63 | 40-70 | 45-80 | 58-100 | 70-120 | 85-140 |
Services Weight | kg | 2000 | 2500 | 3100 | 3600 | 4100 | 4700 | 5800 | 7000 | 10000 |
Oil Flow Rate | l/min | 150-190 | 170-220 | 210-270 | 240-300 | 250-320 | 260-360 | 310-390 | 360-450 | 450-530 |
Operating Pressure | bar | 160-180 | 160-180 | 160-180 | 160-180 | 160-180 | 160-180 | 160-180 | 160-180 | 160-180 |
Impact rate | bpm | 300-625 | 280-580 | 280-560 | 280-560 | 280-550 | 280-540 | 280-480 | 280-450 | 250-380 |
Working tool diameter | mm | 145 | 155 | 165 | 170 | 180 | 190 | 200 | 210 | 240 |
Working length of working tool | mm | 665 | 680 | 745 | 770 | 820 | 860 | 865 | 935 | - |
Max.hydraulic input Power | kw | 57 | 66 | 81 | 90 | 96 | 108 | 117 | 135 | 159 |
Start up Mode | Start Select | Start Select | Start Select | Start Select | Start Select | Start Select | Start Select | Start Select | Start Select | |
Sound Power level Guaranteed31(dB(A)) | 120 | 121 | 119 | 121 | 123 | 126 | 121 | 121 | 123 | |
Sound Pressure level | r=10 | 91 | 92 | 90 | 92 | 93 | 96 | 92 | 92 | 93 |
Part Number | 3363 1027 61 | 3363 0926 91 | 3363 1056 51 | 3363 1003 01 | 3363 1126 55 | 3363 1027 51 | 3363 0904 73 | 3363 0904 81 | ||
Safety And Operating Instruction | 3390 5090 01 | 3390 5096 01 | 3390 5005 01 | |||||||
Equipped with DustProtector II | ||||||||||
Working length of working tool | mm | 600 | 640 | 700 | 720 | 775 | 800 | 810 | 885 | 880 |
Part Number | 3363 1044 17 | 3363 0938 71 | 3363 1056 49 | 3363 1007 79 | 3363 1125 32 | 3363 1044 61 | 3363 0904 75 | 3363 0904 83 | 3363 1003 61 |
Features:
Applications:
| |
CC Combi Cutters | CC 250 | CC 550 | CC1700 U | CC 1700 S | CC 2500 U | CC2500 S | CC 3300 U | CC 3300 S | |
Carrier Weight Class ¹ | t | ,2-4 | ,5-14 | 15-25 | 15-25 | 22-35 | 22-35 | 30-50 | 30-50 |
Service Weight² | Kg | 240 | 530 | 1680 | 1530 | 2640 | 2410 | 3480 | 3280 |
Max. Cutting Force | t | 66 | 141 | 200 | 200 | 300 | 300 | 400 | 400 |
Cutting Force Jaw Tip | t | - | - | - | 80 | - | 133 | - | 141 |
Crushing Force Jaw Tip | t | 18 | 34 | 60 | - | 91 | - | 109 | - |
Oil Flow Rate | L/min | 30-50 | 50-90 | 150-250 | 150-250 | 150-250 | 150-250 | 220-350 | 220-350 |
Operating Pressure | bar | 200 | 250 | 350 | 350 | 350 | 350 | 350 | 350 |
Closing Cycle³ | sec | 2,9 | 3,8 | 1,6 | 1,6 | 2,8 | 2,8 | 2,8 | 2,8 |
Opening Cycle³ | sec | 2,2 | 2,3 | 1,7 | 1,7 | 3,0 | 3,0 | 3,0 | 3,0 |
Swivel Range | º | >360 | >360 | >360 | >360 | >360 | >360 | >360 | >360 |
Rotary Drive | mech. | mech. | hydr. | hydr. | hydr. | hydr. | hydr. | hydr. | |
Oil Flow Rate Rotation | l/min | - | - | max. 30 | max. 30 | max. 30 | max. 30 | max. 30 | max. 30 |
Operating Pressure Rotation | bar | - | - | 150-220 | 150-220 | 150-220 | 150-220 | 150-220 | 150-220 |
Jaw Opening | mm | 360 | 450 | 750 | 385 | 880 | 425 | 1010 | 440 |
Jaw Depth | mm | 350 | 360 | 730 | 520 | 800 | 545 | 765 | 700 |
Blade Length | mm | 120 | 140 | 380 | 380 | 350 | 380 | 525 | 525 |
Overall Height | mm | 1110 | 1325 | 2050 | 1870 | 2250 | 2075 | 2370 | 2310 |
Part Number | 3093 0400 02 | 3093 0400 06 | 3363 0935 41 | 3363 0935 51 | 3363 0937 51 | 3363 0932 01 | 3363 0876 20 | 3363 0876 21 | |
Pulverizing Pads | |||||||||
Part Number | - | 3093 0400 70 | - | - | - | - |