Global Transmission

BBD Bag, Kolkata, West Bengal

High pressure hydraulic tube and pipe fittings made from Type 316 Stainless Steel for maximum corrosion resistance. Stainless steel is recommended for marine applications, chemical processing and other harsh operating conditions. National Pipe Tapered Fuel (NPTF) is widely used in hydraulic applications. The thread is tapered and the seal takes place by deformation of the threads.The National Pipe Straight Mechnical (NPSM) female fitting has a straight thread and an inverted 30 seat. The male fitting has a parallel thread and a 30 internal chamfer. A NPSM female swivel fitting will mate with a properly chamfered NPTF male.SAE 37 flare (JIC) hydraulic fitting is the most common hydraulic hose connection in use today. Both the male and female fittings have 37 seat. Also commonly used with flared hydraulic tubing.Recommended by the NFPA for optimal leakage control in medium and high pressure hydraulic systems. The male fitting has a straight thread and O-ring that sits behind the thread. Flareless Compression fittings connect most types of metal hydraulic tubing without needing to flare the tube ends. This makes them ideal for heavy wall tubing and for repair situations when flaring tools are not available.The BSP connection is similar to National Pipe Straight Mechanical (NPSM), except the the thread pitches are different in most sizes. The BSPP female swivel has a tapered nose/Globeseal flareless swivel which seals on the cone seat of the male.

Global Transmission offers a range of Pipe Clamps manufactured by Global Clamping of pipes in installations is required to dampen vibrations, provide support to the installation and prevent loosening of the joints/welds. Our Clamps, with their unique 4-rib construction design, prevent the transmission of vibrations from the pipe to the frame and vice-versa. They also provide rigid support to the pipe, both in lateral and longitudinal directions, relieving stresses caused by unequal movements in the pipeline. The material of the pipe clamps differs to suit working conditions - from relatively cold conditions to temperatures up to 500C. Heavy Duty Pipe Clamps Heavy Duty Pipe Clamps are used in installations where heavy pipes and high vibrations are encountered. They are invariably used for trench layout of pipes and in open-weather conditions.Heavy Duty Pipe Clamps are available with weld plate mounting for all sizes and for channel mounting with special "T" nuts for pipe sizes up to 1" or 38 mm OD. Channels are available in lengths of 1/2" meter and are economical for multiple mounting on a single channel. Both the weld plate and the channel mounting designs are available only with a top plate in view of the heavy vibration and loading encountered.They are available in a vertical mounting arrangement or a horizontal multi-clamp arrangement wither back to back or run. Standard Duty Pipe Clamps Standard Duty Pipe Clamps are used in installations having average loading with relatively light vibration in the system. These clamps are ideal for machine tool applications and in instrumentation piping. The clamps may be used without the top plate for reasons of economy where there is low/no vibration.Standard Duty Pipe Clamps are also available for channel mounting with special "T" nuts. Channels are available in lengths of V% meter and are useful for multiple clamping on a single base. They also allow flexibility of clamp

We are one of the leading manufacturers and exporters of Industrial Bellow Compensators Stainless steel Metallic Bellows, Axial Expansion Joints , Twin Expansion Joints, Universal Expansion Joints, Hinged Expansion Joints, Metal Bellows, Flexible Bellows, Steel Bellows, SS Bellows, Expansion Joints, Pressure Balanced Expansion Joints, Gimbal Expansion Joints, Rectangular Expansion Joints, Square Expansion Joints, Hinged Expansion Joints, ss compensators, steel expansion joints With our excellence in designing & developing of industrial bellows, we have carved a niche for ourselves in both domestic and international market. All our exapnsion bellows design and manufacture keeping in mind its usage and application specifics so that it delivers optimum performance under all the given conditions. Our expertise in offering products that are exact to the specifications laid down by the clients enables us to offer diverse industries across the global market. We are one of the leading Designers and Manufacturers of Metallic, Multiply Expansion Bellows-Joints and Corrugated Hose assemblies in all grades of Stainless Steel, Super alloys - Inconel, Incoloy, Monel, Hastelloy and other, Rubber, Teflon and Fabric. We are manufacturing Pipe Expansion Bellows-Joints from 40 NB to 2000 NB in Circular Type Expansion Joints and there is no size limitation for Expansion Bellow Compensators.

Applications: Medium / high pressure hydraulic oil lines, fuel oil, gasoline, water. Construction Tube: Black, oil resistant synthetic rubber. Reinforcement: One ply braided high tensil steel wire. Cover: Oil, weather & abrasion resistant synthetic rubber. Temprature -40 Deg. F to +200 Deg. F, -40 Deg. C to + 93 Deg. C, Ocassional use upto 120 Deg. C.

SAE 100 R2/R2 AT DOUBLE WIRE BRAIDED HOSE

Applications: High pressure hydraulic oil lines, fuel oil, gasoline, water. Construction Tube: Black, oil resistant synthetic rubber. Reinforcement: Two ply braided high tensil steel wire. Cover: Oil, weather & abrasion resistant synthetic rubber. Temprature -40 Deg. F to +200 Deg. F, -40 Deg. C to + 93 Deg. C, Ocassional use upto 120 Deg. C

Rating: Not Rated Yet

Safe for people, pets and gardens, this premium garden hose is truly drinking water safe. Using only top quality materials, this polyurethane hose is 100% free from toxic chemicals Read our article

• Ultra light: weighs only 3 pounds for every 50 feet
• 100% Lead-free, Phthalate-free, PVC-free, BPA-free
• Top quality UV-stabilized FDA and NSF grade polyurethane
• Solid machined brass fittings, specially chrome plated
• Specially engineered strain reliefs on both hose ends to prevent kinking
• Flexible in all weather conditions, even freezing temperatures
• No kinks, no cracks, no leaky connections
• 1/2-inch diameter (7/16-inch inside diameter)
• 4-5 gallons per minute flow rate at 80 PSI
• Hose burst pressure: over 400 PSI
• Available in 25' and 50' lengths

Slim and lightweight by design, this polyurethane garden hose is soft, flexible and effortless to use. It weighs only 3 pounds for every 50 feet of hose. It is easily portable and an excellent choice for those who lack the strength to haul a heavier hose. It comes in lengths suitable for watering backyards and patio gardens.

Durable and hard-wearing, the Krcher 20m PrimoFlex hose makes an excellent choice for all your watering needs. Reinforced with 3-layers including one woven inner tube, this ultra-strength hose is twist-free and non-kinking making it easy to use. It also offers complete resilience against the weather thanks to a UV-proof layer.

The hose is suitable for use at temperatures between -20 to 65C.

Precision Pipe Fittings For Instrumentation And Process ControlFine Threads Constructed To Ensure Leak-Free & Reliable SystemsMale Threads Are Protected With Plastic CapVarious Materials Including Ss316, Brass And Carbon SteelMany Choice Of Connections And Configurations Are AvailableMale Npt Both Ends

Global Transmission manufactures Weld Nipple Type Fittings are ideal for high pressure application and they provide absolute sealing action under most severe pressure shocks. All different types of connections are available in weld nipple type fittings. Materials construction can be stainless steel or carbon steel and its maximum pressure up to 1000 bars.

Elbow Connectors For PipesDiameter 4 - 38 Mm Thread:Whiteworth Pipe Thread, TaperedMetric Fine Thread, TaperedNpt

We bring forth for our clients an extensive collection of Brass Fittings, which are available in various sizes and designs as per the requirements of clients. Premium quality brass material is used by our experts in fabrication of these fittings. By using latest techniques, these fittings are checked on various quality parameters. These fittings are used for number of applications in various industries. Our clients can avail these Brass Fittings from us at very reasonable price. Features: High tensile strengthRobust constructionSturdinessDurability

We manufacture best quality Hydraulic End Fittings, which are fitted on either side of the Hydraulic Hoses to catering to specific applications demanded by the customer. Hydraulic Hose End Fittings are widely used in Various Industries. We manufacture End Fittings in special purpose machines such as Semi Automatic Lathes, C.N.C. Lathes, Thread Chaser, etc. Our company manufactures End Fittings from Mild Steel, Stainless Steel and any other material according to the specifications of customers. These are secured by argon welding (TIG) on S.S. Hose depending upon Hose type and service conditions to form a complete Hose Assembly.