Roller Stems are used with tool string in deviated wells. Its application is to reduce friction against tubing ID. In assembly of Roller Stems: Teflon / Alloy Steel Rollers (suitable for high temperature / H2S Service), specialty bearings are assembled with body. Roller Stems are available in various Lengths, ODs,  Connections and Rollers dia.

Wireline Stems are used to provide weight to tool string to eliminate friction with elastomers of stuffing box and for smooth running of wireline against well pressure. Wireline stems are available in various Lengths, ODs, Connections.

Tubing Swage is devised to effectively open out any sections of tubing that may have been crimped or damaged which may restrict the effective ID and access to the well bore.

Wireline Spears are used in general fishing operations when wire is bundled up very badly and two prong wireline grab can not engage it.

Impression Block consist of soft lead insert in the lower end of a steel housing, are used in fishing operations. They are designed to enable the operator to determine the configuration of the top of the fish and to locate its position in the well bore. Its use enables the operator to more precisely assess the fishing conditions and select the proper tool or tools needed to successfully complete the fishing operation.

Wireline Finder is used in wireline fishing operations to locate broken wire in tubing. The fingers of slotted bottom guide pressed against tubing ID and locate the top of wire and direct it inside the finder.

The Gauge Cutter Ring Set is a wireline service tool designed to operate as a standard Gauge Cutter, but with the added facility of being able to interchange different size Gauge Cutters on a standard carrier. The Gauge Cutter Ring Set is of primary benefit where an operation requires a number of Gauge Cutters of similar diameter to be run. This flexibility means that there is no need to keep a large inventory of different size Gauge Cutters, and a considerable cost saving can be made.

Blind Boxes are used when heavy downward jarring is required to dislodge a fish or push something down the hole. Bottom surface of Blind Box is flat and hardened to reduce wear and damage.

• Blind Boxes are available in MM increments within the specified O.D. ranges. When ordering , specify required O.D. in MM ( Inches x 25.4 = MM)

Knuckle Joints are used to add flexibility to the tool string and Knuckle Joints are effective in deviated wells. Whenever Stem and jar are not aligned or not moving freely it is impossible to operate tools. However adding knuckle joint in a string this situation can be avoided. Knuckle Joints are run immediately below Mechanical Jar. For additional flexibility additional Knuckle Joint can be included between Stem and Jar.

Wireline Accelerator is used to run with Hydraulic Jar to reduce shocks at Rope Socket to avoid pulling of wire out of socket and accelerate movement of stem, to achieve effective jarring. Accelerator facilitate constant pull at the time of opening of Hydraulic Jar.

Roller Stems are used with tool string in deviated wells. Its application is to reduce friction against tubing ID. In assembly of Roller Stems: Teflon / Alloy Steel Rollers (suitable for high temperature / H2S Service), specialty bearings are assembled with body. Roller Stems are available in various Lengths, ODs,  Connections and Rollers dia.

Wireline Stems are used to provide weight to tool string to eliminate friction with elastomers of stuffing box and for smooth running of wireline against well pressure. Wireline stems are available in various Lengths, ODs, Connections.

Tubing Swage is devised to effectively open out any sections of tubing that may have been crimped or damaged which may restrict the effective ID and access to the well bore.

Wireline Spears are used in general fishing operations when wire is bundled up very badly and two prong wireline grab can not engage it.

Impression Block consist of soft lead insert in the lower end of a steel housing, are used in fishing operations. They are designed to enable the operator to determine the configuration of the top of the fish and to locate its position in the well bore. Its use enables the operator to more precisely assess the fishing conditions and select the proper tool or tools needed to successfully complete the fishing operation.

Wireline Finder is used in wireline fishing operations to locate broken wire in tubing. The fingers of slotted bottom guide pressed against tubing ID and locate the top of wire and direct it inside the finder.

The Gauge Cutter Ring Set is a wireline service tool designed to operate as a standard Gauge Cutter, but with the added facility of being able to interchange different size Gauge Cutters on a standard carrier. The Gauge Cutter Ring Set is of primary benefit where an operation requires a number of Gauge Cutters of similar diameter to be run. This flexibility means that there is no need to keep a large inventory of different size Gauge Cutters, and a considerable cost saving can be made.

Blind Boxes are used when heavy downward jarring is required to dislodge a fish or push something down the hole. Bottom surface of Blind Box is flat and hardened to reduce wear and damage.

• Blind Boxes are available in MM increments within the specified O.D. ranges. When ordering , specify required O.D. in MM ( Inches x 25.4 = MM)

Knuckle Joints are used to add flexibility to the tool string and Knuckle Joints are effective in deviated wells. Whenever Stem and jar are not aligned or not moving freely it is impossible to operate tools. However adding knuckle joint in a string this situation can be avoided. Knuckle Joints are run immediately below Mechanical Jar. For additional flexibility additional Knuckle Joint can be included between Stem and Jar.

Wireline Accelerator is used to run with Hydraulic Jar to reduce shocks at Rope Socket to avoid pulling of wire out of socket and accelerate movement of stem, to achieve effective jarring. Accelerator facilitate constant pull at the time of opening of Hydraulic Jar.