Our Products
Pipe Reducer
2 Products availablePipe Caps
2 Products availablePipe Nipples
2 Products availableGrade : ASTM / ASME SA 240, 304, 304L, 304H, 309H, 309S, 310S, 310H, 316, 316H, 316L, 316Ti, 317, 317L, 321L, 321H, 347H, 409, 410, 410S, 430
Threaded joints probably represent the oldest method of joining piping systems. Threaded fittings are mainly used for small pipe diameters (Small Bore Piping); generally for piping whose nominal diameter is NPS 2 or smaller. Threaded piping is commonly used in low-cost, noncritical application such as domestic water, fire protection and industrial cooling water systems.
DIAMENTION . STD :- ASME B16.11.
GRADE :-ASTM/ASME A105, A350 LF2 & A182 Gr.F5, F11, F22, F51, F52, F91, F92, F 304, F304H, F304L, 309S, 309H, F310, F316, F316L, F317, F317L, F321 & F347H
CLASS :-3000#, 6000# & 9000#
THREADED TYPE :-NPT, BSP & BSPT
RANGES :-1/2NB TO 4NB
SPECIAL GRADE :-Titanium Steel, Hastelloy Steel, Duplex Steel, Super Duplex Steel, Monel Steel, Incoloy Steel, High Nickel Steel, Cupper-Nickel Alloys SMO-254, Cupper, Brass, etc. in all Grades
Grade : IS 2062, E 250C, F250 BR, E250 BO, E350 BR, E350 BO, E350 C, SAILMA 350, SAILMA 410, SAILMA 450
Grades
UNS NO. S31803, S32205, S32550 S32750, S32760
Grades -Sa193 - B7, SA194 - GRADE 2H, H.T, GALVANISED, HOT DIP GALVANISED, NICKEL PLATING, ZINC PLATING
Special Grades -Titanium Steel, Hastelloy Steel, Duplex Steel, Super Duplex Steel, Monel Steel, Incoloy Steel, High Nickel Steel, Cupper-Nickel Alloys SMO-254, Cupper, Brass, etc. in all Grades
Grades -Sa193 - B7, SA194 - GRADE 2H, H.T, GALVANISED, HOT DIP GALVANISED, NICKEL PLATING, ZINC PLATING
Special Grades -Titanium Steel, Hastelloy Steel, Duplex Steel, Super Duplex Steel, Monel Steel, Incoloy Steel, High Nickel Steel, Cupper-Nickel Alloys SMO-254, Cupper, Brass, etc. in all Grades
Grade :ASTM / ASME SA 240, 304, 304L, 304H, 309H, 309S, 310S, 310H, 316, 316H, 316L, 316Ti, 317, 317L, 321L, 321H, 347H, 409, 410, 410S, 430
Buttweld Pipe Fittings is defined as a part used in a Piping System, for Changing Direction, Branching or for change of Pipe Diameter, and which is Mechanically joined to the system. There are many diffrent type of Fittings and they are the same in all Sizes and Schedules as the Pipe.
DIMENTION . STD :- ASME B16.9 - B36.10.
GRADE :- ASTM/ASME A234 GR.WPB, WP5, WP11, WP22, Wp91, W PHY-60 , A4 20 WPL6 & A403, Gr.WP304, 304L, 316, 316L, 309H, 309S, 310, 317, 317L, 321 & 347H
SCH :- 5, 5S, 10, 10S, 20, 30, 40, 40S, 60, 80, 80S, 100, 120, 140, 160, STD, XS AND XXS
RANGES :- 1/2”NB TO 24”NB
Buttweld Pipe Fittings is defined as a part used in a Piping System, for Changing Direction, Branching or for change of Pipe Diameter, and which is Mechanically joined to the system. There are many diffrent type of Fittings and they are the same in all Sizes and Schedules as the Pipe.
DIMENTION . STD :-ASME B16.9 - B36.10.
GRADE :-ASTM/ASME A234 GR.WPB, WP5, WP11, WP22, Wp91, W PHY-60 , A4 20 WPL6 & A403, Gr.WP304, 304L, 316, 316L, 309H, 309S, 310, 317, 317L, 321 & 347H
SCH :-5, 5S, 10, 10S, 20, 30, 40, 40S, 60, 80, 80S, 100, 120, 140, 160, STD, XS AND XXS
RANGES :-1/2NB TO 24NB
Buttweld Pipe Fittings is defined as a part used in a Piping System, for Changing Direction, Branching or for change of Pipe Diameter, and which is Mechanically joined to the system. There are many diffrent type of Fittings and they are the same in all Sizes and Schedules as the Pipe.
DIMENTION . STD :-ASME B16.9 - B36.10.
GRADE :-ASTM/ASME A234 GR.WPB, WP5, WP11, WP22, Wp91, W PHY-60 , A4 20 WPL6 & A403, Gr.WP304, 304L, 316, 316L, 309H, 309S, 310, 317, 317L, 321 & 347H
SCH :-5, 5S, 10, 10S, 20, 30, 40, 40S, 60, 80, 80S, 100, 120, 140, 160, STD, XS AND XXS
RANGES :-1/2NB TO 24NB
Buttweld Pipe Fittings is defined as a part used in a Piping System, for Changing Direction, Branching or for change of Pipe Diameter, and which is Mechanically joined to the system. There are many diffrent type of Fittings and they are the same in all Sizes and Schedules as the Pipe.
DIMENTION . STD :-ASME B16.9 - B36.10.
GRADE :-ASTM/ASME A234 GR.WPB, WP5, WP11, WP22, Wp91, W PHY-60 , A4 20 WPL6 & A403, Gr.WP304, 304L, 316, 316L, 309H, 309S, 310, 317, 317L, 321 & 347H
SCH :-5, 5S, 10, 10S, 20, 30, 40, 40S, 60, 80, 80S, 100, 120, 140, 160, STD, XS AND XXS
RANGES :-1/2NB TO 24NB
Buttweld Pipe Fittings is defined as a part used in a Piping System, for Changing Direction, Branching or for change of Pipe Diameter, and which is Mechanically joined to the system. There are many diffrent type of Fittings and they are the same in all Sizes and Schedules as the Pipe.
DIMENTION . STD :-ASME B16.9 - B36.10.
GRADE :-ASTM/ASME A234 GR.WPB, WP5, WP11, WP22, Wp91, W PHY-60 , A4 20 WPL6 & A403, Gr.WP304, 304L, 316, 316L, 309H, 309S, 310, 317, 317L, 321 & 347H
SCH :-5, 5S, 10, 10S, 20, 30, 40, 40S, 60, 80, 80S, 100, 120, 140, 160, STD, XS AND XXS
RANGES :-1/2NB TO 24NB
Buttweld Pipe Fittings is defined as a part used in a Piping System, for Changing Direction, Branching or for change of Pipe Diameter, and which is Mechanically joined to the system. There are many diffrent type of Fittings and they are the same in all Sizes and Schedules as the Pipe.
DIMENTION . STD :- ASME B16.9 - B36.10.
GRADE :- ASTM/ASME A234 GR.WPB, WP5, WP11, WP22, Wp91, W PHY-60 , A4 20 WPL6 & A403, Gr.WP304, 304L, 316, 316L, 309H, 309S, 310, 317, 317L, 321 & 347H
SCH :- 5, 5S, 10, 10S, 20, 30, 40, 40S, 60, 80, 80S, 100, 120, 140, 160, STD, XS AND XXS
RANGES :- 1/2NB TO 24NB
A Socket Weld is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, fitting or flange. In contrast to buttweld fittings, Socket Weld fittings are mainly used for small pipe diameter (small bore piping); generally for piping whose nominal diameter is NPS2 or smaller.
DIAMENTION . STD :-ASME B16.11.
GRADE :-ASTM/ASME A105, A350 LF2 & A182 Gr.F5, F11, F22, F51, F52, F91, F92, F 304, F304H, F304L, 309S, 309H, F310, F316, F316L, F317, F317L, F321 & F347H
SPECIAL GRADE -Titanium Steel, Hastelloy Steel, Duplex Steel, Super Duplex Steel, Monel Steel, Incoloy Steel, High Nickel Steel, Cupper-Nickel Alloys SMO-254, Cupper, Brass, etc. in all Grades
CLASS :-3000#, 6000# & 9000#
RANGES :-1/2NB TO 4NB
A Socket Weld is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, fitting or flange. In contrast to buttweld fittings, Socket Weld fittings are mainly used for small pipe diameter (small bore piping); generally for piping whose nominal diameter is NPS2 or smaller.
DIAMENTION . STD :- ASME B16.11.
GRADE :- ASTM/ASME A105, A350 LF2 & A182 Gr.F5, F11, F22, F51, F52, F91, F92, F 304, F304H, F304L, 309S, 309H, F310, F316, F316L, F317, F317L, F321 & F347H
SPECIAL GRADE - Titanium Steel, Hastelloy Steel, Duplex Steel, Super Duplex Steel, Monel Steel, Incoloy Steel, High Nickel Steel, Cupper-Nickel Alloys SMO-254, Cupper, Brass, etc. in all Grades
CLASS :- 3000#, 6000# & 9000#
RANGES :- 1/2”NB TO 4”NB
A Socket Weld is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, fitting or flange. In contrast to buttweld fittings, Socket Weld fittings are mainly used for small pipe diameter (small bore piping); generally for piping whose nominal diameter is NPS2 or smaller.
DIAMENTION . STD :-ASME B16.11.
GRADE :-ASTM/ASME A105, A350 LF2 & A182 Gr.F5, F11, F22, F51, F52, F91, F92, F 304, F304H, F304L, 309S, 309H, F310, F316, F316L, F317, F317L, F321 & F347H
SPECIAL GRADE -Titanium Steel, Hastelloy Steel, Duplex Steel, Super Duplex Steel, Monel Steel, Incoloy Steel, High Nickel Steel, Cupper-Nickel Alloys SMO-254, Cupper, Brass, etc. in all Grades
CLASS :-3000#, 6000# & 9000#
RANGES :-1/2NB TO 4NB
A Socket Weld is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, fitting or flange. In contrast to buttweld fittings, Socket Weld fittings are mainly used for small pipe diameter (small bore piping); generally for piping whose nominal diameter is NPS2 or smaller.
DIAMENTION . STD :-ASME B16.11.
GRADE :-ASTM/ASME A105, A350 LF2 & A182 Gr.F5, F11, F22, F51, F52, F91, F92, F 304, F304H, F304L, 309S, 309H, F310, F316, F316L, F317, F317L, F321 & F347H
SPECIAL GRADE -Titanium Steel, Hastelloy Steel, Duplex Steel, Super Duplex Steel, Monel Steel, Incoloy Steel, High Nickel Steel, Cupper-Nickel Alloys SMO-254, Cupper, Brass, etc. in all Grades
CLASS :-3000#, 6000# & 9000#
RANGES :-1/2NB TO 4NB
A Socket Weld is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, fitting or flange. In contrast to buttweld fittings, Socket Weld fittings are mainly used for small pipe diameter (small bore piping); generally for piping whose nominal diameter is NPS2 or smaller.
DIAMENTION . STD :- ASME B16.11.
GRADE :- ASTM/ASME A105, A350 LF2 & A182 Gr.F5, F11, F22, F51, F52, F91, F92, F 304, F304H, F304L, 309S, 309H, F310, F316, F316L, F317, F317L, F321 & F347H
SPECIAL GRADE - Titanium Steel, Hastelloy Steel, Duplex Steel, Super Duplex Steel, Monel Steel, Incoloy Steel, High Nickel Steel, Cupper-Nickel Alloys SMO-254, Cupper, Brass, etc. in all Grades
CLASS :- 3000#, 6000# & 9000#
RANGES :- 1/2”NB TO 4”NB
A Socket Weld is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, fitting or flange. In contrast to buttweld fittings, Socket Weld fittings are mainly used for small pipe diameter (small bore piping); generally for piping whose nominal diameter is NPS2 or smaller.
DIAMENTION . STD :-ASME B16.11.
GRADE :-ASTM/ASME A105, A350 LF2 & A182 Gr.F5, F11, F22, F51, F52, F91, F92, F 304, F304H, F304L, 309S, 309H, F310, F316, F316L, F317, F317L, F321 & F347H
SPECIAL GRADE -Titanium Steel, Hastelloy Steel, Duplex Steel, Super Duplex Steel, Monel Steel, Incoloy Steel, High Nickel Steel, Cupper-Nickel Alloys SMO-254, Cupper, Brass, etc. in all Grades
CLASS :-3000#, 6000# & 9000#
RANGES :-1/2NB TO 4NB
Threaded joints probably represent the oldest method of joining piping systems. Threaded fittings are mainly used for small pipe diameters (Small Bore Piping); generally for piping whose nominal diameter is NPS 2 or smaller. Threaded piping is commonly used in low-cost, noncritical application such as domestic water, fire protection and industrial cooling water systems.
DIAMENTION . STD :- ASME B16.11.
GRADE :-ASTM/ASME A105, A350 LF2 & A182 Gr.F5, F11, F22, F51, F52, F91, F92, F 304, F304H, F304L, 309S, 309H, F310, F316, F316L, F317, F317L, F321 & F347H
CLASS :-3000#, 6000# & 9000#
THREADED TYPE :-NPT, BSP & BSPT
RANGES :-1/2NB TO 4NB
SPECIAL GRADE :-Titanium Steel, Hastelloy Steel, Duplex Steel, Super Duplex Steel, Monel Steel, Incoloy Steel, High Nickel Steel, Cupper-Nickel Alloys SMO-254, Cupper, Brass, etc. in all Grades
Threaded joints probably represent the oldest method of joining piping systems. Threaded fittings are mainly used for small pipe diameters (Small Bore Piping); generally for piping whose nominal diameter is NPS 2 or smaller. Threaded piping is commonly used in low-cost, noncritical application such as domestic water, fire protection and industrial cooling water systems.
DIAMENTION . STD :- ASME B16.11.
GRADE :-ASTM/ASME A105, A350 LF2 & A182 Gr.F5, F11, F22, F51, F52, F91, F92, F 304, F304H, F304L, 309S, 309H, F310, F316, F316L, F317, F317L, F321 & F347H
CLASS :-3000#, 6000# & 9000#
THREADED TYPE :-NPT, BSP & BSPT
RANGES :-1/2NB TO 4NB
SPECIAL GRADE :-Titanium Steel, Hastelloy Steel, Duplex Steel, Super Duplex Steel, Monel Steel, Incoloy Steel, High Nickel Steel, Cupper-Nickel Alloys SMO-254, Cupper, Brass, etc. in all Grades
Threaded joints probably represent the oldest method of joining piping systems. Threaded fittings are mainly used for small pipe diameters (Small Bore Piping); generally for piping whose nominal diameter is NPS 2 or smaller. Threaded piping is commonly used in low-cost, noncritical application such as domestic water, fire protection and industrial cooling water systems.
DIAMENTION . STD :- ASME B16.11.
GRADE :-ASTM/ASME A105, A350 LF2 & A182 Gr.F5, F11, F22, F51, F52, F91, F92, F 304, F304H, F304L, 309S, 309H, F310, F316, F316L, F317, F317L, F321 & F347H
CLASS :-3000#, 6000# & 9000#
THREADED TYPE :-NPT, BSP & BSPT
RANGES :-1/2NB TO 4NB
SPECIAL GRADE :-Titanium Steel, Hastelloy Steel, Duplex Steel, Super Duplex Steel, Monel Steel, Incoloy Steel, High Nickel Steel, Cupper-Nickel Alloys SMO-254, Cupper, Brass, etc. in all Grades
Threaded joints probably represent the oldest method of joining piping systems. Threaded fittings are mainly used for small pipe diameters (Small Bore Piping); generally for piping whose nominal diameter is NPS 2 or smaller. Threaded piping is commonly used in low-cost, noncritical application such as domestic water, fire protection and industrial cooling water systems.
DIAMENTION . STD :- ASME B16.11.
GRADE :- ASTM/ASME A105, A350 LF2 & A182 Gr.F5, F11, F22, F51, F52, F91, F92, F 304, F304H, F304L, 309S, 309H, F310, F316, F316L, F317, F317L, F321 & F347H
CLASS :- 3000#, 6000# & 9000#
THREADED TYPE :- NPT, BSP & BSPT
RANGES :- 1/2”NB TO 4”NB
SPECIAL GRADE :- Titanium Steel, Hastelloy Steel, Duplex Steel, Super Duplex Steel, Monel Steel, Incoloy Steel, High Nickel Steel, Cupper-Nickel Alloys SMO-254, Cupper, Brass, etc. in all Grades
Threaded joints probably represent the oldest method of joining piping systems. Threaded fittings are mainly used for small pipe diameters (Small Bore Piping); generally for piping whose nominal diameter is NPS 2 or smaller. Threaded piping is commonly used in low-cost, noncritical application such as domestic water, fire protection and industrial cooling water systems.
DIAMENTION . STD :- ASME B16.11.
GRADE :- ASTM/ASME A105, A350 LF2 & A182 Gr.F5, F11, F22, F51, F52, F91, F92, F 304, F304H, F304L, 309S, 309H, F310, F316, F316L, F317, F317L, F321 & F347H
CLASS :- 3000#, 6000# & 9000#
THREADED TYPE :- NPT, BSP & BSPT
RANGES :- 1/2”NB TO 4”NB
SPECIAL GRADE :- Titanium Steel, Hastelloy Steel, Duplex Steel, Super Duplex Steel, Monel Steel, Incoloy Steel, High Nickel Steel, Cupper-Nickel Alloys SMO-254, Cupper, Brass, etc. in all Grades
Threaded joints probably represent the oldest method of joining piping systems. Threaded fittings are mainly used for small pipe diameters (Small Bore Piping); generally for piping whose nominal diameter is NPS 2 or smaller. Threaded piping is commonly used in low-cost, noncritical application such as domestic water, fire protection and industrial cooling water systems.
DIAMENTION . STD :- ASME B16.11.
GRADE :-ASTM/ASME A105, A350 LF2 & A182 Gr.F5, F11, F22, F51, F52, F91, F92, F 304, F304H, F304L, 309S, 309H, F310, F316, F316L, F317, F317L, F321 & F347H
CLASS :-3000#, 6000# & 9000#
THREADED TYPE :-NPT, BSP & BSPT
RANGES :-1/2NB TO 4NB
SPECIAL GRADE :-Titanium Steel, Hastelloy Steel, Duplex Steel, Super Duplex Steel, Monel Steel, Incoloy Steel, High Nickel Steel, Cupper-Nickel Alloys SMO-254, Cupper, Brass, etc. in all Grades
Threaded joints probably represent the oldest method of joining piping systems. Threaded fittings are mainly used for small pipe diameters (Small Bore Piping); generally for piping whose nominal diameter is NPS 2 or smaller. Threaded piping is commonly used in low-cost, noncritical application such as domestic water, fire protection and industrial cooling water systems.
DIAMENTION . STD :- ASME B16.11.
GRADE :-ASTM/ASME A105, A350 LF2 & A182 Gr.F5, F11, F22, F51, F52, F91, F92, F 304, F304H, F304L, 309S, 309H, F310, F316, F316L, F317, F317L, F321 & F347H
CLASS :-3000#, 6000# & 9000#
THREADED TYPE :-NPT, BSP & BSPT
RANGES :-1/2NB TO 4NB
SPECIAL GRADE :-Titanium Steel, Hastelloy Steel, Duplex Steel, Super Duplex Steel, Monel Steel, Incoloy Steel, High Nickel Steel, Cupper-Nickel Alloys SMO-254, Cupper, Brass, etc. in all Grades
Threaded joints probably represent the oldest method of joining piping systems. Threaded fittings are mainly used for small pipe diameters (Small Bore Piping); generally for piping whose nominal diameter is NPS 2 or smaller. Threaded piping is commonly used in low-cost, noncritical application such as domestic water, fire protection and industrial cooling water systems.
DIAMENTION . STD :- ASME B16.11.
GRADE :- ASTM/ASME A105, A350 LF2 & A182 Gr.F5, F11, F22, F51, F52, F91, F92, F 304, F304H, F304L, 309S, 309H, F310, F316, F316L, F317, F317L, F321 & F347H
CLASS :- 3000#, 6000# & 9000#
THREADED TYPE :- NPT, BSP & BSPT
RANGES :- 1/2NB TO 4NB
SPECIAL GRADE :- Titanium Steel, Hastelloy Steel, Duplex Steel, Super Duplex Steel, Monel Steel, Incoloy Steel, High Nickel Steel, Cupper-Nickel Alloys SMO-254, Cupper, Brass, etc. in all Grades
Tubes is Customarily Specified by its Outside Diameter (O.D.) and Wall Thickness (W.T) expressed either in Birmingham Wire Gauge (BWG) or in thousandths of an inch.
DIAMENTION. STD :- ASME B36.19 - B36.10.
GAUGE :- 12 / 14 / 16 / 18 / 20 / 22
GRADE :- ASTM/ASME A213 & A269 Gr.TP304, 304L, 310, 316, 316L, 317, 317L , 321 & 347H
TYPE :- ERW / SEAMLESS
Branch Connection Fittings (also known as O`lets) are fittings which provide an outlet from a larger pipe to a smaller one (or one of the same size.). The main pipe onto which the branch connection is welded is usually called the Run or Header Size.
DIAMENTION . STD :- ASME B16.11/MSS SP95/MSS SP97.
GRADE :- ASTM/ASME A105, A350 LF2 & A182 Gr.F5, F11, F22, F51, F52, F91, F92, F 304, F304H, F304L, 309S, 309H, F310, F316, F316L, F317, F317L, F321 & F347H
CLASS :- 3000#, 6000# & 9000# & SCH.10 TO SCH.XXS
RANGES :- 1/2”NB TO 4”NB BRANCH SIZE & 2”NB TO 48”PIPE SIZE
SPECIAL GRADE :- Titanium Steel, Hastelloy Steel, Duplex Steel, Super Duplex Steel, Monel Steel, Incoloy Steel, High Nickel Steel, Cupper-Nickel Alloys SMO-254, Cupper, Brass, etc. in all Grades
Types
A Socket Weld is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, fitting or flange. In contrast to buttweld fittings, Socket Weld fittings are mainly used for small pipe diameter (small bore piping); generally for piping whose nominal diameter is NPS2 or smaller.
DIAMENTION . STD :-ASME B16.11.
GRADE :-ASTM/ASME A105, A350 LF2 & A182 Gr.F5, F11, F22, F51, F52, F91, F92, F 304, F304H, F304L, 309S, 309H, F310, F316, F316L, F317, F317L, F321 & F347H
SPECIAL GRADE -Titanium Steel, Hastelloy Steel, Duplex Steel, Super Duplex Steel, Monel Steel, Incoloy Steel, High Nickel Steel, Cupper-Nickel Alloys SMO-254, Cupper, Brass, etc. in all Grades
CLASS :-3000#, 6000# & 9000#
RANGES :-1/2NB TO 4NB
Pipes is Customarily Identified by Nominal Pipe Size (NPS), with Wall Thickness (W.T) defined by Schedule Number (SCH).
DIM. STD :- ASME B36.19 - B36.10.
SCH :- 5, 5S, 10, 10S, 20, 30, 40, 40S, 60, 80, 80S, 100, 120, 140, 160, STD, XS AND XXS
GRADE :-
TYPE :- ERW / SEAMLESS
SPECIAL GRADE :- Titanium Steel, Hastelloy Steel, Duplex Steel, Super Duplex Steel, Monel Steel, Incoloy Steel, High Nickel Steel, Cupper-Nickel Alloys SMO-254, Cupper, Brass, Aluminium, etc. in all Grades
Buttweld Pipe Fittings is defined as a part used in a Piping System, for Changing Direction, Branching or for change of Pipe Diameter, and which is Mechanically joined to the system. There are many diffrent type of Fittings and they are the same in all Sizes and Schedules as the Pipe.
DIMENTION . STD :-ASME B16.9 - B36.10.
GRADE :-ASTM/ASME A234 GR.WPB, WP5, WP11, WP22, Wp91, W PHY-60 , A4 20 WPL6 & A403, Gr.WP304, 304L, 316, 316L, 309H, 309S, 310, 317, 317L, 321 & 347H
SCH :-5, 5S, 10, 10S, 20, 30, 40, 40S, 60, 80, 80S, 100, 120, 140, 160, STD, XS AND XXS
RANGES :-1/2NB TO 24NB