Other Products / Services #5840078

• Maximum diameter Dia 1500 mm
• Effective width 1400mm - 25mm
• Pneumatic brake control of web tension.
• Taper centre, stretch centre is optional.
• Hydraulic control of the lifting and lowering, clamping, releasing, right left movement.

• Maximum diameter 1500 mm
• Range of width 1400mm - 1800mm
• Pneumatic or manual control of web tension.
• Taper centre, stretch centre is optional.
• Motorized lifting and lowering, clamping, releasing, right-left adjustment of the reel paper.

• Effective width: 1400mm-2500mm, Design Speed: 80m/min-120m/min
• Mechanical configuration: Slitter and N.C helical knife and stacker
• Min. cutting length: 300mm Max. cutting length: 9999mm
• Cutting accuracy: 1 mm (uniform speed) 1.5mm (non-uniform speed)
• Five group 160 round knife.
• Memory of 200 orders, man-machine interface, the screen displays information available, easy for machine operator modify or cancel order at any time.
• Adopt Germany KEB servo system and high-performance synchronous servo motor.
• Helical knives structure with HSS knife edge, serration type knife and scissor cutting with less shear force, to keep the knives long life
• Host base and machine frame adopt grey cast iron, to keep machine strong and stable

• This series on corrugated board cut paper, roll the line , slice the corner open the slot machine, is comprehensive production equipment which integrate several process such as cutting corner line and slicing the side, electric phase, the machine characteristic is feeding single paperboard one by one, general flexural paperboard is applicable too.
• Slicing the Corner, opens the slot knife can 360 degree positive turn and reverse turn, circularly convenient to adjust , reliable to lock and open slot precisely , the adjusting function designed compactly durable and long using life

• Whole machine electric paris was choice the famous brand. good quality and steady
• Complete machine baffle and Important paris was used the temper for decrease the metal mtern.i force.and the paris was made by high precisron center and gnnder by digit-controlled gnncier
• All the transmission axle and roller are made by the high-quality steel.temper.and dynarmc balance:plate With ngld chrome and gnnnerl surtacc
• All the transmission gear was used the 45# alloy steel .which IS gnnded after heat-treatmenl.and It was made by rubbinq.it still maintains the high topping precision
• The whole machine unrlergoes the spray lubrication. intuitionist show settmq .sertmq the double oil pipe balance system.
• Whole machine working interval adjustment.self -Iock worm wheel and worm device, fast and convenient.
• Option Ceramix Anilox roller. Stacker

• It adopt the combination chain-paper feeding style.
• Adopt planet type electric phase 360 degree adjusting, while revolving or stopping can be adjust quickly and accurately.
• When machine stopped working, inker roller auto separate with printing roller, avoid spoiled the printing roller.
• Inker roller have the separately turn device to prevent ink dried when machine stopped work.
• Pneumatic locking.electrically separation.
• Ink supply by pneumatic diaphragm pump.
• Main transmission gear made by 45# steel after high frequency quenching.
• Transmission part adopt sprinkle lubricating system, ensure the machine precise and use life.

• Changing the size within one minute
• Easy operation and no needs of experiences
• The machine could be stapled single nail
• Feeding department automatic count, when get the bundle then send to tie up.
• Operation by the touching screen
• Adopting servo control system
• Distance of each nail can reach 120mm
• Having cover or no cover could be nailed
• The distance of nails could input by the touching screen directly
• The ss of the paper could be adjusted automatically

This machine is designed for sharp cutting and fast production of single face paper corrugated board without damaging the flutes. Length of the sheet can be adjusted.

Heavy Duty Hand Operated Machine for Cutting of Corrugated Board and Plain Paper

This Machine use in the application of glue on the tips of the corrugated surface of paper or a board. The gap between the rolls is adjustable. The glue tray can be raised or lowered to adjust the glue level.

Sheet Pressing is used for pressing of Corrugated Sheets. The glued sheets which are processed on pasting machine are paid on lower plate and then pressure is applied for some time by lowering upper moving plate.

This machine is suitable for printing of paper and board .It is water based ink technology for instant drying. This sheet can be used immediately alter printing for further processing. It is single color sheet printer is also available.

Laminatioin machine is suitable for roll to toll and strip lamiination. It is DC drive vaariable speed control, hard chrome rolls and adjustable gum tray. This machine is film slitting attachment and separate rewinding and fumming section.

Platen Punching Machine is designed for Cutting, Creasing and Embossing on Paper, Duplex Board, Paper Corrugated Sheets, Fibreglass sheets, Vinyl, Foam Rubber, Felt, Gaskets, Wood Veneers, Leather, Sponge Rubber, Cork, Plastics, Polythene, Linoleum & PVC Sheets, etc

Salient Features

• DWELL TIMING DEVICE' can set timing of the moving platen from 0.5 to 10 seconds. At dwell option, the moving platen remains stationary in an open position for the set dwell time before resuming motion. This is very useful feature when large/difficult jobs are being fed or when fine registration of Die in a job is required. This feature minimizes wastage in jobs.
• 'ELECTROMAGNETIC CLUTCH & BRAKE' enables push button control of the machine for easy and efficient operation. The advanced electromagnetic clutch & brake do not require lubrication.
• Multiple 'SAFETY DEVICES' viz. Off-position at Rotary Switch, Leg operated Safety Guard, Protective Wrap-Around Safety Guard, Trip Bar on the moving platen (optional), Safety is ensured by full electrical interlocking. All moving parts of the machine are protected by approved safety guards.
• Quick & simple adjustment of impression / pressure equalization independent for each side. The set value of impression can be read on graduated scale.
• High performance Precision Gears viz. Helical & Herringbone Gears (it works silently, without vibration and have capacity to bear extreme load).
• The Platen is driven by the ball bearing mounted shafts through a pair of reduction gears protected by guards.Rigid construction and compact design of the machine requires minimum floor-space.
• Number of impressions made by the machine are displayed on the operating penal.
• Main Shaft & Connecting Arms are mounted on Phosphor Bronze Bushes.
• One piece casting, properly stress relieved.
• All the shafts are of high quality alloy-steel.
• High performance Precision Gears.
• Single piece connecting arms of steel.
• Moving Platen running on hardened steel rails

There is No Need for extra machine for hot foil stamping.You just put this Hot Foil Stamping Attachment on Die Cutting Machine & You are ready for Hot Stamping. Saves your great Costs. Comes in Two Models, With Single Roll, With Double Pull, so you can have upto Two impressions at a time.

This machine is meant to slot & corner cut the corrugated board simultaneously. The machine is provided with three slotting heads and one corner head. These heads can be easly set by means of gear rack mechanism provided with the machine. Screw are provided on the slotting head for adjusting the side cutters.