Our Products
Industrial Pump
2 Products availableAgricultural Pipes
1 Products availableCalibrators And Monitoring Systems
1 Products availableWater Purifier
1 Products availableEarthmoving Machines
1 Products availableTiller
1 Products availableIndustrial Drilling Machine
1 Products availableLaces, Interlinings & Other Accessories
1 Products availableOur offered Product range includes Water Well Drilling Rigs, Friction Welded Drill Rods, mining drilling rigs, Piling Drill Rig and MINI CRAWLER MOUNTED HYDRAULIC RIGS.
Description | Core Drilling Application KMC - 10 |
DTH Drilling Application KMC - 10 |
Capacity: Drill hole Dia.(CORE/DTH) Drill Depth Over Burden Drill Dia. Over Burden Drill Depth | NW / NQ 500 Feet. ----- ----- Under Favorabnle drilling conditions | 4.5” 500 Feet. 6.5” 150 Feet. Under Favorabnle drilling conditions |
Hydraulic System: A)Prime Mover B) Feed Pull up Force. Pull Down Force. Pull Down Speed. Pull up Speed C) Rotation Speed Torque Speed. Torque. |
Deck Engine 942 HP @ 1500 rpm) 4700 Kgf. 2400 Kgf. 30 m/min. 24 m/min. 0-80 rpm (Low mode) 203 Kgf-m and 0-410 rpm (High mode) 41 Kgf-m | Deck Engine 942 HP @ 1500 rpm) 4700 Kgf. 2400 Kgf. 30 m/min. 24 m/min. 0-80 rpm (Low mode) 203 Kgf-m ------------ ------------ |
Compressor Minimum Suggested |
---------------------------- | 540 CFM & 185 PSI |
Under Carriage | Maximum Speed 2 kmph Grouser Type Single/Triple Wheel Base 1650 mm Grouser width 254/310 mm Ground pressure 0.78 kgf/sq.cm Type of Drive Independent Hydraulic Motor For each Track No. of Rollers. 5 on each track | Maximum Speed 2 kmph Grouser Type Single/Triple Wheel Base 1650 mm Grouser width 254/310 mm Ground pressure 0.78 kgf/sq.cm Type of Drive Independent Hydraulic Motor For each Track No. of Rollers. 5 on each track |
Water Pump Capacity Suggested min Drive & Mounting |
50 LPM @ 35 Kgf/cm² | 36 LPM @ 28 Kgf/cm² Hydraulic |
Hoist: | 1 Ton @ 30 meters / minute | ----------------------- |
DESCRIPTION | MODELS | ||
DTHR 300 | DTHR450 | DTHR 600 | |
Drilling Capacity:Drill hole size Max. Remaining Size (in steps) Max. Depth Drill rod size | 10.0” (254mm) 14.0” (335mm) 984 ft (300 mtrs) 4.5” (114 mm) | 10.0” (254mm) 14.0” (335mm) 1475 (450 mtrs) 4.5” (114 mm) | 10.0” (254mm) 16.0” (406mm) 1965 ft (600 mtrs) 4.5” (114 mm) |
(Under Favourable Drilling Condition) | |||
Mast: Construction Centraliser opening R.H Travel | Sturdy Box Type 16.0” (406mm) 23 ft (7 mtrs) | Sturdy Box Type 16.0” (406mm) 23 ft (7 mtrs) | Sturdy Box Type 18.0” (457mm) 23 ft (7 mtrs) |
Rotary Head: Max. Speed Max. Torque | 0 to 120 rpm 434 Kgf | 0 to 120 rpm 475 Kgf | 0 to 120 rpm 519 Kgf |
Feed System: Pull Up Force (Max.) Pull Down Force (Max.) Rapid speed (up) | 11285 Kgf 5525 Kgf 40 m/min | 16085 Kgf 8480 Kgf 30 m/min | 21990 Kgf 11215 Kgf 24 m/min |
Hydraulic System:Max. Operating Pressure Filtration (Nom) Return Tank Capacity | 220 bar 10 microns 750 ltrs | 240 bar 10 microns 800 ltrs | 210 bar 10 microns 800 ltrs |
Prime Mover:Input Drive | Driven by suitable Diesel engine | Driven by suitable Diesel engine | Driven by suitable Diesel engine |
Levelling Jacks:Cylinder Stroke | 4 No.s Ø 125mm X 610mm | 4 No.s Ø 125mm X 610mm | 4 No.s Ø 125mm X 610mm |
(System Consists of Reverse Flow Resricted Valves) | |||
Break Out Wrench: Actuation Type Cylinder Stroke | Hydraulic 300 mm | Hydraulic 300 mm | Hydraulic 300 mm |
Mud Pump: Bore Stroke Max. Flow Max. Pressure Drive | 152 mm 152 mm 1021 LPM 15 Kg/cm² Hydraulic | 152 mm 152 mm 1021 LPM 15 Kg/cm² Hydraulic | 152 mm 200 mm 1361 LPM 20.75 Kg/cm² Hydraulic |
Options: Oil Cooler Type Water Injection Pump Flow Max. Presssure Type of Drive | Manual operated Rod changer & Jib Hoist - Welding Generator Hydraulic Driven Hydraulic Driven Fin type oil to air 36 Lpm 30 Kg/Cm² Hycraulic | Manual operated Rod changer & Jib Hoist - Welding Generator Hydraulic Driven Hydraulic Driven Fin type oil to air 36 Lpm 30 Kg/Cm² Hycraulic | Manual operated Rod changer &Jib Hoist - Welding Generator Hydraulic Driven Hydraulic Driven Fin type oil to air 55 Lpm 42 Kg/Cm² Hycraulic |