Genesis Coatings Pvt Ltd

Baner, Pune, Maharashtra

This system includes the two fluidising hoppers. First hopper collects the recycled powder from cyclone by gema pump. Second hopper attached with the powder sieving unit, mix the fresh power & recycled powder in proper ratio & transfer to the powder coating guns. Field of application the ps powder sieve machine is intended exclusively for sieving plastic powder (organic) and enamel powder. Any other use is considered as non-conform. The manufacturer is not responsible for any damage resulting from this - the risk for this is assumed by the user alone! powder supply powder can be fed to the sieve by either powder pumps or pinch valves, according to booth type and customer specifications. Venting the powder hopper if an overpressure is created in the powder hopper, the powder can be swirled up and blown back into the hoses and the venting tube of the powder sieve machine.in order to avoid an overpressure in the powder hopper, it is recommended to vent the powder hopper. For this purpose, an airmover (for hf-50 powder hopper) or a retrofit venting set (for hf-100150200) can be installed (see therefore the operating manual of the corresponding powder hopper).

Optigun ga03 robust with the highest transfer efficiency perfect coating results with all types of powder even demanding metallic and special powders optimal transfer efficiency thanks to the 100 kv high performance cascade quick color change design broad range of application accessories simple maintenance procedures wear resistant and ergonomic design suitable for injector and optispray pump technology optigun for quick color changesthe automatic powder gun optigun is compact and easy to maintain. During color changes, the gun is quickly cleaned and ready to be used again. Save powderthe automatic optigun with the integrated 100 kv cascade delivers the highest transfer efficiency in combination with the gun control optistar. The patented dvc technology ensures a precise and constant powder delivery, resulting in a more uniform distribution and remarkable powder savings.

Powder Hopper: SSMS - Capacity 30kg50kg100kgInsert Sleeves (Venturi)Round jet nozzle: completeFlat jet nozzle: completePowder hoseThreaded sleeve: completeGun BodyGun CableElectrode holder: completeInjectorSuper Corona Attachment etc.

Booths available in Stainless Steel, Mild Steel OR Plastics with Mono Cyclone, PowderRecovery System & After Filters.High Recovery Efficiency-Maximum possible powder collected in the cyclone unit due to better design and very lesspowder in the after recovery- Design allows faster color changes due to optimum possiblecleaning.Short installation time-Most of the system components are delivered preassembled so the system can be installedvery quickly. It can be easily integrated into existing installations with minimal downtime.Robust, low maintenance costs-The solid booth construction without any moving parts ensures a long service life withextremely low maintenance costs. The booth floor is easily accessible for maintenance andcontrol.Efficient, user-friendly layout-All systems components are optimally matched based on our extensive worldwideexperience. This means that the operator can easily and quickly access all key systemelements during normal operation as well as during the color change process and formaintenance.

The new optiflex2 puts the worlds most advanced manual powder coating technology in the palm of your hand. Spray all powders with ease, coat complex geometries with outstanding efficiency and quality and do it all in the most challenging environments anywhere on the planet. Gema optiflex2f powder coating unit will give you the advantage of better quality of surface finish with efficient working & powder saving upto 20-30% as compared to the other powder coating equipments. Gema optiflex2f powder coating unit will give the advantage of powder saving & better quality of surface finish with efficient working as compared to the other powder coating equipments. In gema optiflex2f control unit, digital current control is provided so that coating thickness (dft), surface finish can be controlled precisely. The patented digital valve control (dvc) technology ensures precise and reproducible powder output regulations and improves the film thickness consistency. For challenging powders such as metallic or special effect, optiflex2 offers precision charge control (pcc) ensuring greater accuracy and adjustability of current settings below ten microamperes (10 a). The integrated 100 kv cascade delivers the highest transfer efficiency. This means more powder on the work piece, less powder in the recovery system! presets programmes available on control panel for flat partscomplicated partsrecoating parts with gema use can be made 20 programs and the programs can be just called.The total operation time can be viewed on control unitthe same can be used in preventive maintenance schedule.