We are offering name : dunnage bag inflator gun, bi-25 type : ergonomically designed dunnage bag inflator can be used with different nozzles : no moc : tough engineering plastic, practically unbreakable. Air consumption @ 5.5 bar : 15 cfm inlet connection size : 14" bsp female thread. New ex blow gun is fitted with suspending hook and convinient levered trigger. Applications : dunnage bag inflator, quick filling of dunnage bags.

What is a General Imsubs Vortex Tube? The General Imsubs Vortex Tube is an effective, low cost solution to a wide variety of industrial spot cooling and process cooling needs. Compressed air is injected into the vortex tube, flows at a rate of up to 1, 000, 000 RPM towards the 'hot' end of the tube. Once this hot air reaches the end, a small amount is exhausted through a control valve. The rest of the air is forced backwards towards the other end and exits as 'cold' air. The Vortex Tube can decrease temperatures by 115F (46C) and raise temperatures up by 200F (93C) from the initial inlet air temperature. Vortex tubes are available in two sizes, Small and Medium depending upon compressed air consumption.

Our Vortex Tubes are available in 2 sizes(Small and Medium). Each Vortex Tube is constructed of stainless steel. The wear resistance of stainless steel, as well as its resistance to corrosion and oxidation, assures thatVortex Tubewill provide years of reliable, maintenance free-operation.

Advantage of Vortex tubeSafety, as no electricity at the point of application.No RF interference.Low cost of ownershipLower noise.SS 304 construction. Special material constructions available on specific order.Available in two sizesEnhances reliability and durability of equipment Applications or Vortex Tube

Heat sealing machines

Sewing machine needle coolingTools and plastic grinding and machiningSpot cooling

Laboratory instrument / chambers cooling.

Ultrasonic welding horn cooling

Dry machining

Camera cooling in spray drier, induction furnaces and such applications.

General Imsubs, Vortex based cabinet coolers are compact, quick install and maintenance free solution to heating problem often faced in control panels. General Imsubs cabinet coolers are made from Stainless steel and they do not affect safety of panel cabinets. General Imsubs cabinet coolers are available with thermostat control or continuous operation type.

General Imsubs Cabinet coolers are provided with pressure relief valves so that safety of panel cabinet is not affected. Cabinet coolers are available in various cooling capacity from 55 to 700 Kcal/Hr (215 to 2800 Btu/H). Multiple cabinet coolers can be coupled to achieve higher cooling capacities.

PERFORMANCE: Performance mentioned here is at tube being set to maximum refrigeration. Air flow is at 7 bar (100 PSI) pressure.

Cabinet coolers are advised to be used with appropriate drier, where compressed air due point temperature is lower than -25 C to ensure safety of control panel.

Cabinet coolers are supplied with air distribution kit and customer can optionally order suitable air filters.

Available options:

1. Air filter
2. Side mounting kits.
3. Temperature control kit with solenoid valve (Requires AC power supply)

Rapid Fill is compressed air operated, simple to operate and maintain granule loaders for plastic industry.

Why Rapid fill??

Rapid Fill is rugged, simple to operate timer based vacuum hopper loading system. It is low cost andpractically zero maintenance and zero down time.

What are special features?Special features are SS construction, zero maintenace, zero down time, simple operator friendly timer based operation, hopper on hopper design.

How to install hopper loader?Just like any other hopper loader, it can be installed on hopper lid or lid of hopper drier.

Is there any over fill protection?Rapid fill is provided with 2 filters. Internal SS mesh and outside non woven PP fabric. Because of construction, overfill is not possible. In case of reduced demand, hopper loader will keep on operating pump but conveying will not take place.

How much air is consumed?Air consumption depends upon conveying rate per hour and type of granule used. However maximum cost of transfer of one kilogram of plastic granule is 3 paise ( about Rs. 30 per tonne / US $ 0.7 per tonne) at 3 meter conveying height. If loader is operated 100% cycle , i.e. 300 kgs / Hour, maximum air consumption is about 255 LPM (9 CFM)

What is shipping weight?Shipping weight of complete system includes loader, timer controller, hose and suction wand is just 14 kilograms.

AdvantageSafety, as no electricity at the point of application.No RF interference.Low cost of ownership and operation.Zero maintenance.Aluminum + SS construction, all contact parts are made out of SS 304Reliable, timer based operation. Good for single granules.Hopper on Hopper type. Can be fitted on hopper lid or hopper drier. Applications Plastic Granule conveyingSmall component conveying.Bottle cap conveying

Compressed Air Operated portable, quick set up vacuum conveyors for small parts, granules etc. Can also be used for fume extractions, trim conveying and fixed air blowers for cooling and ventilating. Available in Aluminum and stainless steel. Can be supplied in any special material against order.

What is a RAPFLO?

Rapflo is compressed air operated barrel filling and emptying system. It is suitable for steel drums and non volatile liquids. No spark or motor hence almost zero maintenance.

AdvantageSafety, as no electricity at the point of application.No RF interference.Low cost of ownershipLower noise.SS 304 construction.Enhances reliability and durability of equipmentEmpty or fill barrel in 2-3 minutes.Does not use long unsafe mains wires. Power source is safe compressed air. Applications Collection of spill oil.Emptying of hydraulic oils from machine / coolant / machine sumps.Emptying diesel to gensets. (Volatile liquids can not be filled back into the barrel)Wet and Dry, huge capacity vacuum cleaner when used with suitable accessoris and cannister.Liquid filling in hazardous area.

Real Vac is a versatile multipurpose wet & dry material collection system cum vacuum cleaning system, powered by compressed air. It is capable of collecting virtually anything from powders to granules to liquids. It can be used as an Industrial wet & dry vacuum cleaner, material collection hopper.

Its 15 or 30 liter castored drum guarantees easy moveability and is capable of collecting liquids safely as it has spill preventing built in float valve. Washable reusable filter having 5 micron porosity to ensure hygiene and cleanliness in premises.

Real Vac can safely pickup non volatile liquid spillage, even in hazardous areas as there is no electricity at the point of application.

Castored Compressed air operated vacuum cleaner.Stainless steel drum with wet pick up capability and auto shut off over fill valve.Two extension wands.One Floor cleaning brush.One wet skimmer tool.One round cleaning brush.flexible hose.High efficiency filter

Necessary clamps & air hose nipples.

Real Wipe, Compressed Air operated cable wiprers wipe clean cable more efficiently than conventional blower based wipers or drilled round pipes. They are smaller, lighter and efficient. They also provide 360 degree uniform drying and cooling. Available in Aluminum and Stainless steel.

What is a Cable Wiper?

Cable Wiper is advanced and eficient replacement of drilled pipes and blower based cable drying / wiping system.

Which are the sizes available?Cable wipers are available from 13 mm to 150 mm diameter and in Aluminum and SS construction.

How to install cable wipers?Cable wipers are hinged and are made in two halves so installation is very easy and installation can be done without affecting / inturrupting extrusion line.

How much air is consumed?Depending upon size and shim size used, air consumption is between 5 - 115 CFM (130 to 3200 SLPM)

AdvantageSafety, as no electricity at the point of application.No RF interference.Low cost of ownershipLower noise.Aluminum or SS constructionAvailable in various sizes from 13 mm to 150 mmReliable Applications cable dryingCable coolingTubing drying and coolingSurround cooling of extrusions

Cold air gun utilized vortex tube to provide dry cool air for spot cooling dry machining and many other such application.

Cold air guns utilizes available compressed air on shop floor and gives stream of cold air which could have temperature 40 C lower than input compressed air temperature.

Cold air guns has no moving parts hence practically zero maintenance. Its magnetic base allows quick and easy installation

Cold air guns are known to increase tool life and machining speed while machining plastics, brass, wood and other material which must be machined dry.

Features:

• Instant installation and portable, can be shifted to machine instantly.
• Adjustable cold fraction hence adjustable cold air temperature.
• Flexible, stay put hose for precise targeting of cold air.
• Two outlet hose hoses available against specific orders.
• Dramatically increases tool life and improves tolerances.
• Cold air stream blow off cheap hence post cleaning may not be needed.

Application:

• Dry Machining of plastic, brass and composite materials.
• Grinding, drilling and sharpening operations.
• Mold, dies cutting edge cooling.
• Cooling of adhesive, solders and weld seams.
• Spot cooling requirements.

PERFORMANCE: Performance mentioned here is at cold air gun being set to maximum refrigeration. Air flow is at 7 bar (100 PSI) pressure.

ALL GENERAL IMSUBS PRODUCTS ARE SUPPORTED FOR SPARES AND ARE FULLY REPAIRABLE. PLEASE BE FAIR TO ENVIRONMENT AND AVOID USING DISPOSIBLE PRODUCTS. WE COMMIT SPARE SUPPORT TO OUR CUSTOMERS.

Coolant guns are extensively used on CNC, VMC and other machining centers to cool and clean jobs. It may be used for coolant or water depending on specific requirement.

Durable and light weight Aluminum handle along with long lasting Adjustable brass nozzle makes ideal product for coolant / water jetting or spraying. Nozzle can be adjusted from powerful jet to wide misty spray.

We also provide high flow Quick Coupler with 3/8" BSP threads, suitable for our coolant / water gun as well as other applications.

Applications

CNC Machines

VMC Machines

Machining centers

Lathe machines

Drilling Machines

Boring Machines

We are offering name : dunnage bag inflator gun, bi-25 type : ergonomically designed dunnage bag inflator can be used with different nozzles : no moc : tough engineering plastic, practically unbreakable. Air consumption @ 5.5 bar : 15 cfm inlet connection size : 14" bsp female thread. New ex blow gun is fitted with suspending hook and convinient levered trigger. Applications : dunnage bag inflator, quick filling of dunnage bags.

What is a General Imsubs Vortex Tube? The General Imsubs Vortex Tube is an effective, low cost solution to a wide variety of industrial spot cooling and process cooling needs. Compressed air is injected into the vortex tube, flows at a rate of up to 1, 000, 000 RPM towards the 'hot' end of the tube. Once this hot air reaches the end, a small amount is exhausted through a control valve. The rest of the air is forced backwards towards the other end and exits as 'cold' air. The Vortex Tube can decrease temperatures by 115F (46C) and raise temperatures up by 200F (93C) from the initial inlet air temperature. Vortex tubes are available in two sizes, Small and Medium depending upon compressed air consumption.

Our Vortex Tubes are available in 2 sizes(Small and Medium). Each Vortex Tube is constructed of stainless steel. The wear resistance of stainless steel, as well as its resistance to corrosion and oxidation, assures thatVortex Tubewill provide years of reliable, maintenance free-operation.

Advantage of Vortex tubeSafety, as no electricity at the point of application.No RF interference.Low cost of ownershipLower noise.SS 304 construction. Special material constructions available on specific order.Available in two sizesEnhances reliability and durability of equipment Applications or Vortex Tube

Heat sealing machines

Sewing machine needle coolingTools and plastic grinding and machiningSpot cooling

Laboratory instrument / chambers cooling.

Ultrasonic welding horn cooling

Dry machining

Camera cooling in spray drier, induction furnaces and such applications.

General Imsubs, Vortex based cabinet coolers are compact, quick install and maintenance free solution to heating problem often faced in control panels. General Imsubs cabinet coolers are made from Stainless steel and they do not affect safety of panel cabinets. General Imsubs cabinet coolers are available with thermostat control or continuous operation type.

General Imsubs Cabinet coolers are provided with pressure relief valves so that safety of panel cabinet is not affected. Cabinet coolers are available in various cooling capacity from 55 to 700 Kcal/Hr (215 to 2800 Btu/H). Multiple cabinet coolers can be coupled to achieve higher cooling capacities.

PERFORMANCE: Performance mentioned here is at tube being set to maximum refrigeration. Air flow is at 7 bar (100 PSI) pressure.

Cabinet coolers are advised to be used with appropriate drier, where compressed air due point temperature is lower than -25 C to ensure safety of control panel.

Cabinet coolers are supplied with air distribution kit and customer can optionally order suitable air filters.

Available options:

1. Air filter
2. Side mounting kits.
3. Temperature control kit with solenoid valve (Requires AC power supply)

Rapid Fill is compressed air operated, simple to operate and maintain granule loaders for plastic industry.

Why Rapid fill??

Rapid Fill is rugged, simple to operate timer based vacuum hopper loading system. It is low cost andpractically zero maintenance and zero down time.

What are special features?Special features are SS construction, zero maintenace, zero down time, simple operator friendly timer based operation, hopper on hopper design.

How to install hopper loader?Just like any other hopper loader, it can be installed on hopper lid or lid of hopper drier.

Is there any over fill protection?Rapid fill is provided with 2 filters. Internal SS mesh and outside non woven PP fabric. Because of construction, overfill is not possible. In case of reduced demand, hopper loader will keep on operating pump but conveying will not take place.

How much air is consumed?Air consumption depends upon conveying rate per hour and type of granule used. However maximum cost of transfer of one kilogram of plastic granule is 3 paise ( about Rs. 30 per tonne / US $ 0.7 per tonne) at 3 meter conveying height. If loader is operated 100% cycle , i.e. 300 kgs / Hour, maximum air consumption is about 255 LPM (9 CFM)

What is shipping weight?Shipping weight of complete system includes loader, timer controller, hose and suction wand is just 14 kilograms.

AdvantageSafety, as no electricity at the point of application.No RF interference.Low cost of ownership and operation.Zero maintenance.Aluminum + SS construction, all contact parts are made out of SS 304Reliable, timer based operation. Good for single granules.Hopper on Hopper type. Can be fitted on hopper lid or hopper drier. Applications Plastic Granule conveyingSmall component conveying.Bottle cap conveying

Compressed Air Operated portable, quick set up vacuum conveyors for small parts, granules etc. Can also be used for fume extractions, trim conveying and fixed air blowers for cooling and ventilating. Available in Aluminum and stainless steel. Can be supplied in any special material against order.

What is a RAPFLO?

Rapflo is compressed air operated barrel filling and emptying system. It is suitable for steel drums and non volatile liquids. No spark or motor hence almost zero maintenance.

AdvantageSafety, as no electricity at the point of application.No RF interference.Low cost of ownershipLower noise.SS 304 construction.Enhances reliability and durability of equipmentEmpty or fill barrel in 2-3 minutes.Does not use long unsafe mains wires. Power source is safe compressed air. Applications Collection of spill oil.Emptying of hydraulic oils from machine / coolant / machine sumps.Emptying diesel to gensets. (Volatile liquids can not be filled back into the barrel)Wet and Dry, huge capacity vacuum cleaner when used with suitable accessoris and cannister.Liquid filling in hazardous area.

Real Vac is a versatile multipurpose wet & dry material collection system cum vacuum cleaning system, powered by compressed air. It is capable of collecting virtually anything from powders to granules to liquids. It can be used as an Industrial wet & dry vacuum cleaner, material collection hopper.

Its 15 or 30 liter castored drum guarantees easy moveability and is capable of collecting liquids safely as it has spill preventing built in float valve. Washable reusable filter having 5 micron porosity to ensure hygiene and cleanliness in premises.

Real Vac can safely pickup non volatile liquid spillage, even in hazardous areas as there is no electricity at the point of application.

Castored Compressed air operated vacuum cleaner.Stainless steel drum with wet pick up capability and auto shut off over fill valve.Two extension wands.One Floor cleaning brush.One wet skimmer tool.One round cleaning brush.flexible hose.High efficiency filter

Necessary clamps & air hose nipples.

Real Wipe, Compressed Air operated cable wiprers wipe clean cable more efficiently than conventional blower based wipers or drilled round pipes. They are smaller, lighter and efficient. They also provide 360 degree uniform drying and cooling. Available in Aluminum and Stainless steel.

What is a Cable Wiper?

Cable Wiper is advanced and eficient replacement of drilled pipes and blower based cable drying / wiping system.

Which are the sizes available?Cable wipers are available from 13 mm to 150 mm diameter and in Aluminum and SS construction.

How to install cable wipers?Cable wipers are hinged and are made in two halves so installation is very easy and installation can be done without affecting / inturrupting extrusion line.

How much air is consumed?Depending upon size and shim size used, air consumption is between 5 - 115 CFM (130 to 3200 SLPM)

AdvantageSafety, as no electricity at the point of application.No RF interference.Low cost of ownershipLower noise.Aluminum or SS constructionAvailable in various sizes from 13 mm to 150 mmReliable Applications cable dryingCable coolingTubing drying and coolingSurround cooling of extrusions

Cold air gun utilized vortex tube to provide dry cool air for spot cooling dry machining and many other such application.

Cold air guns utilizes available compressed air on shop floor and gives stream of cold air which could have temperature 40 C lower than input compressed air temperature.

Cold air guns has no moving parts hence practically zero maintenance. Its magnetic base allows quick and easy installation

Cold air guns are known to increase tool life and machining speed while machining plastics, brass, wood and other material which must be machined dry.

Features:

• Instant installation and portable, can be shifted to machine instantly.
• Adjustable cold fraction hence adjustable cold air temperature.
• Flexible, stay put hose for precise targeting of cold air.
• Two outlet hose hoses available against specific orders.
• Dramatically increases tool life and improves tolerances.
• Cold air stream blow off cheap hence post cleaning may not be needed.

Application:

• Dry Machining of plastic, brass and composite materials.
• Grinding, drilling and sharpening operations.
• Mold, dies cutting edge cooling.
• Cooling of adhesive, solders and weld seams.
• Spot cooling requirements.

PERFORMANCE: Performance mentioned here is at cold air gun being set to maximum refrigeration. Air flow is at 7 bar (100 PSI) pressure.

ALL GENERAL IMSUBS PRODUCTS ARE SUPPORTED FOR SPARES AND ARE FULLY REPAIRABLE. PLEASE BE FAIR TO ENVIRONMENT AND AVOID USING DISPOSIBLE PRODUCTS. WE COMMIT SPARE SUPPORT TO OUR CUSTOMERS.

Coolant guns are extensively used on CNC, VMC and other machining centers to cool and clean jobs. It may be used for coolant or water depending on specific requirement.

Durable and light weight Aluminum handle along with long lasting Adjustable brass nozzle makes ideal product for coolant / water jetting or spraying. Nozzle can be adjusted from powerful jet to wide misty spray.

We also provide high flow Quick Coupler with 3/8" BSP threads, suitable for our coolant / water gun as well as other applications.

Applications

CNC Machines

VMC Machines

Machining centers

Lathe machines

Drilling Machines

Boring Machines