Our Products
Router, Cables & Networking Devices
2 Products availableBusbar System
1 Products availableSoftware Development Service
1 Products availableBreaker Panels
1 Products availableFire Alarm Control Panel
1 Products availableKitchenware And Cookware
1 Products availableElectric Fittings And Components
1 Products availableLeading Manufacturer, Supplier & Retailer of fire hydrant panel, intelligent mcc, auto phase sequence correction panel, Generator monitoring Auto Mains Failure module and Indication Boxes.
GC CONTROL SYSTEMS PVT LTDManufacture and Supply of CPRI Approved Fire Hydrantthat are used in various industries such as Chemical & pharmaceutical. The fire hydrant panels are playing major role of the fire system and are designed by us using advanced technology. They are Known for reliability and durability, our range is available in different specifications to meet varied needs of clients.
We offer wide range of qualityRelay Panelsfor cement plant controls to our clients.
Offered by us a broad range ofAlarm Annunciator Panels, which provides a visual indication of a number of electric circuits. These panels are manufactured using high quality raw material, procured from reputed vendors of the market. Apart from these, we offer various installation and maintenance services for the same so as to meet maximum satisfaction of the clients. Furthermore, these panels are widely used as a central indicator of the status of equipment or systems in the following:
Our expertise in cable trays and raceways as per customers requirement and providing these all over India and abroad. Cable tray system comprising cable trays and associated fittings forms a rigid structure used to securely fasten and support cables. These can be used both overhead and underground. Use of cable trays makes maintenance and replacement of cables much easier and enhances the life of cables.
Types of Cable Trays :We deal in both Ladder-Type cable trays and Perforated Types cable trays. Their perforations allow air circulation and drainage and also entry/exit points for small cables. Normally these are kept open at top. However, if required, we can also provide their cover for extra protection. Cable tray cover has no perforations.
Unlike to perforated and ladder type trays, there are Solid Bottom Trays available. These are also called Cable Channels or Cable Troughs. However, these are not popular and seldom used.
Material UsedCable trays are commonly made of galvanized steel, stainless steel cable trays or aluminum sheets. On specific demand, we can also provide cable trays made of glass-fiber reinforced plastic. Unlike metallic trays, these are completely non-conductive and, therefore, do not need to be grounded. These trays are fully chemical and corrosion resistant.
ThicknessDepending on load of cables, the thickness of cable trays may vary from 1 mm to 4 mm.
Finishing
Cable Tray AccessoriesWe supply also clamping and supporting accessories like Clamp, Coupler Plate, Elbow. Bend, Junction Box, Tee and Reducer etc. that are used with cable trays to provide a complete and functional tray system.
Advantages
- Real-time monitoring
- Access from anywhere in the facility
- Complete documentation and MCC history
- Allows predictive maintenance, process monitoring and advanced diagnostics
- Ease of moving and adding units
- Prevents accidental damage to network cables
- Pre-tested and pre-configured
- No set-up, no programming, no expert required
GC Technologies hold expertise in operations as Auto Phase Sequence Correction Panel manufacturer & supplier in Faridabad, India. We are one of the renowned providers of a high quality range of Automatic Phase Sequence Corrector Panels / APSC Panels. These panels are technologically advanced and are designed and manufactured using micro controllers and embedded technology. The switches, Contactors, and controllers used for manufacturing these products are tested for high quality before they are incorporated into the panels. Customers appreciate this range for its high performance and durability, which is enhanced by powder coating these panels to make them resistant to corrosion.
Why to Use Our Panels? :1. Our panels are made of good quality materials in accordance with industrial quality standards and latest technology.2. The panel casing is of strong weather-proof galvanized stainless steel and is durable, efficient and highly functional.3. These ensure durability, high performance, trouble free operation, less maintenance and low power consumption.4. We adhere strictly to stringent quality checks required by various industries like telecom, electrical and electronics industries.
Customers can avail from us, comprehensive range of Meter Boards that is manufactured using very high grade raw material. Immaculately finished, these products have a pleasing appearance and are carefully wired to deliver unmatched performance. Used extensively in domestic as well as industrial purposes, these products are highly versatile and functional. We offer these products at industry leading prices to ensure that they are available to our customers from various segments with different budgetary constraints.Due to our excellent quality, expertise and perfection, we, today, are known among the leading Electric Meter boards, industrial Meter Boards, and domestic Meter Boards manufacturer & supplier in Faridabad, India.
Why to Use Our Panels? :1. Our panels are made of good quality materials in accordance with industrial quality standards and latest technology.2. The panel casing is of strong weather-proof galvanized stainless steel and is durable, efficient and highly functional.3. These ensure durability, high performance, trouble free operation, less maintenance and low power consumption.4. We adhere strictly to stringent quality checks required by various industries like telecom, electrical and electronics industries.
These are designed to control the speed of electric motor and feed pump. They are widely used in drilling, pumping and other large machine applications. The VFD panels are widely used in tube mills, paper mills, extruder plants, rolling Mills, cable industry and CTL Lines. They are even installed in hospitals, business houses and other public places. VFD control panel are designed to match variable speed requirements of a process unit and so are vigorously tested on various speed parameters.
The Variable Frequency drive panel( VFD Panel) also known as Digital VFD Drives and these panels are used for VFD squirrel cage induction, in motor control application.Our VFD Panels available in various dimensions and standard sizes as per the client specification.These VFD Panels are tested on various parameters before being supplied to the client.We use VFD as per customers preference.
For starting surge control application even soft starter are used and we also provide soft starters panel where the soft starters of various makers offered.
This is a Module with Generator monitoring, protection and start facilities. Operation of the module is via three pushbuttons mounted on the front panel with STOP, MANUAL and AUTO positions. Selection of the Auto mode is confirmed by LED indicator, and monitors the incoming mains supply (3 Phase or Single phase). Should the incoming AC mains supply fall below a configurable pre-set limit, the generator will be started, and load transferred to the gen-set.
When the AC mains supply returns to within limits, the module will transfer load back to the mains. The engine will be instructed to stop after a cool-down period. The modules microprocessor provides comprehensive functions.
AMF control System provides:
Main features for AMF Panels (Auto Mains Failure Panel)
These panels are used in commercial buildings and industries where there is fluctuation in voltage and power supply. The electrical load required by a unit depends upon the type of machineries, cooling plants and other devices installed. There is always a possibility of damage of these equipments if power fluctuates. In case of fixed loads they can be safeguarded using capacitors, but in case of varied loads, a mechanism to switch in and switch out the capacitors is required which is basically handled using APFC panels.
We are manufacturing a wide range of Power Factor Correction Panels / Power Factor Control Panels that is available in auto and manual variants. These products are used to actualize zero voltage switching of capacitors and removing switching transients. By sensing the load current through the current transformer installed in one of the three phases, the power factor helps in calculating the load power factor. This is necessary to take the voltage feedback from the balance in two phases. Owing to the use of inductive equipment and resistive components inside the electrical components, power loss occurs due to the inductivity, which results in less utilization of power.Being an expert and experienced APFC System manufacturer & supplier in Faridabad, India, we meet out several customers Auto Power Factor Correction Panel / APFC Panel demands with precision.
Why to Use Our Panels? :
1. Our panels are made of good quality materials in accordance with industrial quality standards and latest technology.
2. The panel casing is of strong weather-proof galvanized stainless steel and is durable, efficient and highly functional.
3. These ensure durability, high performance, trouble free operation, less maintenance and low power consumption.
4. We adhere strictly to stringent quality checks required by various industries like telecom, electrical and electronics industries.
We are one of the top manufacturers and suppliers ofInstrument Control Panels. These Panels are made by implementing latest technologies to offer high consistency. These are widely used in controlling the power consumption of machines.
Our organization is engaged in manufacturing and supplying a wide range ofElectrical Control Panels.This highly functional range of panels is known for its sturdy construction and unmatched performance. The offered range improves power factor to increase energy efficiency and is made available in different specifications in order to meet various requirements of the clients. Additionally, we offer installation and maintenance services for these panels.
Features:
We offer different types ofControl Desk Panelsdepending upon the space and functionality requirement. Our products are fitted with all necessary control features such as fault annunciation with mimic diagrams, hooters and instrumentation. We also undertake custom-designed orders to meet our customers specific needs. Our products are completed and delivered within the committed time frame and we assure competitive pricing.
Customers can avail from usFixed and Draw-out Motor Control Centersat reasonable price. These control centers are designed and developed for various controlling electric motors & other equipment from a central location. All these products are offered as per the specific requirements detailed down by the customers.
Furthermore, the entire range is designed to handle the following:
We manufacture a wide range of Motor Control Centre (MCC) Panels / MCC Panels and other distribution panels for our customers. These panels are available in powder coating and conform to the highest international standards. Manufactured using high quality copper or aluminum bus bars, this range is appreciated by our clients owing to its ability to feed larger loads to support high capacity industrial motors. In addition to manufacturing these products in standard configuration, our industrial expertise enables us to offer these products as per the specific demands of the customers.
GC Technologies is among the pioneering motor control centre panel / heavy duty motor control centre manufacturer & supplier in Faridabad, India.
These are effectively used with motors or submersible pumps to provide sufficient protection from overloads and short circuits. These are high on performance, require low maintenance and can withstand extreme temperature variations.
OurLocal Push Button Stationsare available in polycarbonate or abs thermoplastic materials. We also provide accessories along with the customized boxes like cable glands, conduits, and mounting hinges to meet the customers specific requirements.
We are engaged in offering repairing and maintenance services forIndication Boxes.These services are rendered by our professionals by employing advanced tools & machinery using premium quality raw material and components. Moreover, these professionals make sure that these services are rendered in compliance with the international quality standards. In addition to this, customers can avail these reliable and timely executed services at market leading prices from us.
Control roomEngineers deskLaptop used by maintenance personnel
