We are among the renowned manufacturer and supplier of quality madeCPRI Approved Electric Control Panel. Fabricated using the latest technology, these CPRI Approved Electric Control Panels are made from durable materials sourced from well known vendor in the industry. These panels are rigorously checked by our team of engineers to comply with government standard of safety. Our panels are widely appreciated due to its efficiency and effectiveness of use. These CPRI Approved Electric Control Panels are very useful to synchronize, control and distribute electricity evenly.

Features:

• Sturdy
• Low power consumption
• Precision engineered
• Low maintenance
• Cost efficient
• Water proof

We are one of the recognized names in the industry for designing, keeping in mind the specific requirements of the clients, and providing an array of Electrical Panels some of which are listed below. These panels are made of good quality materials in accordance with industrial quality standards. These find their application in commercial buildings, hospitals, industries, dairies, telecommunications, research laboratories etc.

1. We offer a high quality range of Power Control Centers to our customers. These products are designed, wired, and tested with utmost care and precision before being assembled at the factory with the electrical components inside. Owing to their impeccable quality and performance, these are used extensively in industries with remote input / output and communication bus to control hundreds of inputs and outputs. As per the specifications of the customers, we can manufacture these products using copper or aluminum bus bars.
2. Today, with experience and expertise, we have gained a reputation as leading Power Control Centre (PCC), Main Power Control Center, Emergency Power Control Center, and Industrial Power Control Center manufacturer & supplier in Faridabad, India.
4. Power Control Centers are being designed and manufactured upto 4000A rating, suitable for operational Voltage of 415V in a 3 phase 4 wire distribution system with an insulation voltage upto 660V at an ambient Temperature of 40 degree Celsius. The form of separation as IS 8623 is FORM IV. Short circuit withstand capacity is 50 kA and degree of protection IP:52, both of these parameters are type tested. The switchboards offered are in Fixed and semi draw-out type configuration with single front design.

Why to Use Our Panels? :

1. Our panels are made of good quality materials in accordance with industrial quality standards and latest technology.

2. The panel casing is of strong weather-proof galvanized stainless steel and is durable, efficient and highly functional.

3. These ensure durability, high performance, trouble free operation, less maintenance and low power consumption

4. We adhere strictly to stringent quality checks required by various industries like telecom, electrical and electronics industries.

Customers can avail from us a wide range ofAC/DC Drive Panelsat market leading price. These panels are widely used in various industries for meeting constant and variable torque needs specified by the clients. Known for its customized features and designs, our range is fabricated using wire with precondition devices. This design also results in providing incoming and outgoing signals from one point to another. Further, below enlisted are the attributes of our range:

• High efficiency
• Less maintenance
• Trouble free operations

We offer highly functional DC drives, dc motor drives, variable speed dc drives which are used to control motor speed i.e dc motor drives. In addition to the ability to expand the standard functionality, the standard version can be expanded to handle higher-level software applications with built-in extended technology software. These drives are extremely flexible and cost effective in any application. Available in different specifications, we offer customized solution to our clients like variable dc drives. We also offers variable speed drives, variable speed motor drives, industrial dc drives, servo drives, industrial dc drive, electric dc drives and dc motor control.

Features :

• These can be fully integrated into current automation environment
• These can be expanded in modular fashion from standard application to high-performance solutions
• Extension provided through parallel connection up to 18000 A
• Rated supply voltages from 400 V to 950 V
• Short as well as fast commissioning as all settings are fully electronically parameterized
• Unified operator control philosophy
  

Typical Applications:

• As main drives for printing machines
  In rubber and plastics industry
• As traction and hoisting drives in crane industry
• As lift and cableway drives
• Finding application in paper industry
• As shears drives in steel industry
• As rolling mill drives
• As winder drives
• As dynamometers for motors, turbines and gearbox test stands

We are among the renowned manufacturer and supplier of quality madeCPRI Approved Electric Control Panel. Fabricated using the latest technology, these CPRI Approved Electric Control Panels are made from durable materials sourced from well known vendor in the industry. These panels are rigorously checked by our team of engineers to comply with government standard of safety. Our panels are widely appreciated due to its efficiency and effectiveness of use. These CPRI Approved Electric Control Panels are very useful to synchronize, control and distribute electricity evenly.

Features:

• Sturdy
• Low power consumption
• Precision engineered
• Low maintenance
• Cost efficient
• Water proof

We are one of the recognized names in the industry for designing, keeping in mind the specific requirements of the clients, and providing an array of Electrical Panels some of which are listed below. These panels are made of good quality materials in accordance with industrial quality standards. These find their application in commercial buildings, hospitals, industries, dairies, telecommunications, research laboratories etc.

1. We offer a high quality range of Power Control Centers to our customers. These products are designed, wired, and tested with utmost care and precision before being assembled at the factory with the electrical components inside. Owing to their impeccable quality and performance, these are used extensively in industries with remote input / output and communication bus to control hundreds of inputs and outputs. As per the specifications of the customers, we can manufacture these products using copper or aluminum bus bars.
2. Today, with experience and expertise, we have gained a reputation as leading Power Control Centre (PCC), Main Power Control Center, Emergency Power Control Center, and Industrial Power Control Center manufacturer & supplier in Faridabad, India.
4. Power Control Centers are being designed and manufactured upto 4000A rating, suitable for operational Voltage of 415V in a 3 phase 4 wire distribution system with an insulation voltage upto 660V at an ambient Temperature of 40 degree Celsius. The form of separation as IS 8623 is FORM IV. Short circuit withstand capacity is 50 kA and degree of protection IP:52, both of these parameters are type tested. The switchboards offered are in Fixed and semi draw-out type configuration with single front design.

Why to Use Our Panels? :

1. Our panels are made of good quality materials in accordance with industrial quality standards and latest technology.

2. The panel casing is of strong weather-proof galvanized stainless steel and is durable, efficient and highly functional.

3. These ensure durability, high performance, trouble free operation, less maintenance and low power consumption

4. We adhere strictly to stringent quality checks required by various industries like telecom, electrical and electronics industries.

Customers can avail from us a wide range ofAC/DC Drive Panelsat market leading price. These panels are widely used in various industries for meeting constant and variable torque needs specified by the clients. Known for its customized features and designs, our range is fabricated using wire with precondition devices. This design also results in providing incoming and outgoing signals from one point to another. Further, below enlisted are the attributes of our range:

• High efficiency
• Less maintenance
• Trouble free operations

We offer highly functional DC drives, dc motor drives, variable speed dc drives which are used to control motor speed i.e dc motor drives. In addition to the ability to expand the standard functionality, the standard version can be expanded to handle higher-level software applications with built-in extended technology software. These drives are extremely flexible and cost effective in any application. Available in different specifications, we offer customized solution to our clients like variable dc drives. We also offers variable speed drives, variable speed motor drives, industrial dc drives, servo drives, industrial dc drive, electric dc drives and dc motor control.

Features :

• These can be fully integrated into current automation environment
• These can be expanded in modular fashion from standard application to high-performance solutions
• Extension provided through parallel connection up to 18000 A
• Rated supply voltages from 400 V to 950 V
• Short as well as fast commissioning as all settings are fully electronically parameterized
• Unified operator control philosophy
  

Typical Applications:

• As main drives for printing machines
  In rubber and plastics industry
• As traction and hoisting drives in crane industry
• As lift and cableway drives
• Finding application in paper industry
• As shears drives in steel industry
• As rolling mill drives
• As winder drives
• As dynamometers for motors, turbines and gearbox test stands