OZAIR TRADELINK large and varied inventory of titanium mill-product forms such as plate, sheet, coil, strip, foil, billet, bar and wire.Our material is of prime quality and is fully certifiable to orthopedic(ASTM F-136, F167 and F1472), aerospace (AMS, Mil-T) and industrial specifications (ASTM and ASME).we has having experienced operators that deal with complex operations such astitanium machiningandtitanium processing.Huge Titanium sheets stockiest and suppliers in india

Available in the following forms:

• Sheet
• Coil
• Plate
• Bar
• Rod
• Tube
• Wire
• Billet
• Forging

Commercially Pure Titanium:

• Grade 1
• Grade 2
• Grade 3
• Grade 4
• Grade 7
• Grade 11

Titanium Alloys:

• 6Al-4V or Grade 5
• 6AL-4V ELI or Grade 23
• Grade 12
• 5Al-2.5Sn

Our export audiance for Suppying Titanium Alloys

With the large scale of supplying Network & Ability to cater Giant Project in various large Industries to supply our products asTitanium Alloysraw materials right now we are exporting our products in all Major countries all over the world.some of them areUnited States, United Arab Emirates, Canada, Pakistan, Spain, France, United Kingdom, Indonesia, Iran, Kuwait, Qatar, Yamen Mexico, Malaysia, Nigeria, Singapore, Saudi Arabia, Netherlands, Brazil, Colombia, Egypt, Iraq, Sri Lanka, Russia, Vietnam, South Africa, Nigeria, Turkey, Bangladesh, Italy, Japan, Thailand, Hong Kong, Switzerland, New ZealandWe welcome your inquiries.

Aluminium alloys (or aluminum alloys; see spelling differences) are alloys in which aluminium (Al) is the predominant metal. The typical alloying elements are copper, magnesium, manganese, silicon, tin and zinc. There are two principal classifications, namely casting alloys and wrought alloys, both of which are further subdivided into the categories heat-treatable and non-heat-treatable. About 85% of aluminium is used for wrought products, for example rolled plate, foils and extrusions. Cast aluminium alloys yield cost-effective products due to the low melting point, although they generally have lower tensile strengths than wrought alloys. The most important cast aluminium alloy system is AlSi, where the high levels of silicon (4.013%) contribute to give good casting characteristics. Aluminium alloys are widely used in engineering structures and components where light weight or corrosion resistance is required.

Alloys composed mostly of aluminium have been very important in aerospace manufacturing since the introduction of metal-skinned aircraft. Aluminium-magnesium alloys are both lighter than other aluminium alloys and much less flammable than alloys that contain a very high percentage of magnesium.

Aluminium alloy surfaces will develop a white, protective layer of aluminium oxide if left unprotected by anodizing and/or correct painting procedures. In a wet environment, galvanic corrosion can occur when an aluminium alloy is placed in electrical contact with other metals with more positive corrosion potentials than aluminium, and an electrolyte is present that allows ion exchange. Referred to as dissimilar-metal corrosion, this process can occur as exfoliation or as intergranular corrosion. Aluminium alloys can be improperly heat treated. This causes internal element separation, and the metal then corrodes from the inside out. Aircraft mechanics deal daily with aluminium alloy corrosion.

Aluminium alloy compositions are registered with The Aluminum Association. Many organizations publish more specific standards for the manufacture of aluminium alloy, including the Society of Automotive Engineers standards organization, specifically its aerospace standards subgroups and ASTM International

• Aluminum Square 6063 Bar
• Aluminum Alloy 6351 T6 Plates
• Aluminum Round Bar 6082-T6
• Aluminum Alloy 5052 H32
• Aluminum Alloy 6061 T6 Plates
• Aluminum Tread Plate
• Aluminium Hexagon
• Aluminum Round 6061 T6
• Aluminum Flat Bars
• Aluminum Alloy 6082
• Aluminum Strips
• Aluminum Square Bar 6061 T6
• Aluminium Square Sheet
• Aluminum Bars
• Aluminum Angles
• Aluminum Alloy Sheet 3003-H14
• Aluminum Busbar
• Aluminum Plates
• Aluminum Square Bar
• Aluminum Square and Hex Bar
• Aluminum Channels
• Aluminum Alloy 2014
• Aluminum Hex Bar
• Aluminum Alloy 2024
• Aluminum Diamond Tread Plate
• Aluminum Flat 6061
• Aluminium Tube Round
• Aluminum Alloy 5086
• Aluminum Alloy 2219
• Aluminum Alloy 5083
• Aluminum Washer
• Aluminum Alloy 7075
• Aluminum Foils
• Aluminum Sheets
• Aluminum Corrugated Sheets
• Aluminum Circle
• Aluminum Coils
• Aluminum Tees
• Aluminum Round Bar
• Aluminum Chequered Sheets

Features:

• Heat resistance
• Durable finish
• Less maintenance

Stainless steel is a corrosion resistant steel alloy with a minimum of 10.5% chromium. There are different grades and surface finishes of stainless steel produced to accommodate the environment in which the material will be implemented. Unlike carbon steel, stainless steel does not rust when exposed to air and moisture due to the sufficient amount of chromium present.

OZAIR TRADELINK Steels TITNIUM Alloys stocks a large and varied inventory of titanium mill-product forms such as plate, sheet, coil, strip, foil, billet, bar and wire. Our material is of prime quality and is fully certifiable to orthopedic, aerospace and industrial specifications.

Inconel Alloys or are highly engineered to offer a superior combination of high temperature corrosion resistance, toughness , heat resistance and strength and for the most demanding applications.Inconel is a family of austenite nickel-chromium-based superalloys.

Nickel is a versatile, highly corrosion resistant element that will alloy with most metals. Due to its corrosion resistance, nickel is used to maintain product purity in the processing of foods and synthetic fibers. It is highly resistant to various reducing chemicals and is unexcelled in resistance to caustic alkalies.

A nickel-iron controlled-expansion alloy containing 42% nickel. It has a low and nominally constant coefficient of thermal expansion from room temperature to about 570f (300c).

Monel is a group of nickel alloys, primarily composed of nickel (up to 67%) and copper, with small amounts of iron, manganese, carbon, and silicon. Stronger than pure nickel, Monel alloys are resistant to corrosion by many agents, including rapidly flowing seawater. They can be fabricated readily by hot- and cold-working, machining, and welding.

OZAIR TRADELINK large and varied inventory of titanium mill-product forms such as plate, sheet, coil, strip, foil, billet, bar and wire.Our material is of prime quality and is fully certifiable to orthopedic(ASTM F-136, F167 and F1472), aerospace (AMS, Mil-T) and industrial specifications (ASTM and ASME).we has having experienced operators that deal with complex operations such astitanium machiningandtitanium processing.Huge Titanium sheets stockiest and suppliers in india

Available in the following forms:

• Sheet
• Coil
• Plate
• Bar
• Rod
• Tube
• Wire
• Billet
• Forging

Commercially Pure Titanium:

• Grade 1
• Grade 2
• Grade 3
• Grade 4
• Grade 7
• Grade 11

Titanium Alloys:

• 6Al-4V or Grade 5
• 6AL-4V ELI or Grade 23
• Grade 12
• 5Al-2.5Sn

Our export audiance for Suppying Titanium Alloys

With the large scale of supplying Network & Ability to cater Giant Project in various large Industries to supply our products asTitanium Alloysraw materials right now we are exporting our products in all Major countries all over the world.some of them areUnited States, United Arab Emirates, Canada, Pakistan, Spain, France, United Kingdom, Indonesia, Iran, Kuwait, Qatar, Yamen Mexico, Malaysia, Nigeria, Singapore, Saudi Arabia, Netherlands, Brazil, Colombia, Egypt, Iraq, Sri Lanka, Russia, Vietnam, South Africa, Nigeria, Turkey, Bangladesh, Italy, Japan, Thailand, Hong Kong, Switzerland, New ZealandWe welcome your inquiries.

Aluminium alloys (or aluminum alloys; see spelling differences) are alloys in which aluminium (Al) is the predominant metal. The typical alloying elements are copper, magnesium, manganese, silicon, tin and zinc. There are two principal classifications, namely casting alloys and wrought alloys, both of which are further subdivided into the categories heat-treatable and non-heat-treatable. About 85% of aluminium is used for wrought products, for example rolled plate, foils and extrusions. Cast aluminium alloys yield cost-effective products due to the low melting point, although they generally have lower tensile strengths than wrought alloys. The most important cast aluminium alloy system is AlSi, where the high levels of silicon (4.013%) contribute to give good casting characteristics. Aluminium alloys are widely used in engineering structures and components where light weight or corrosion resistance is required.

Alloys composed mostly of aluminium have been very important in aerospace manufacturing since the introduction of metal-skinned aircraft. Aluminium-magnesium alloys are both lighter than other aluminium alloys and much less flammable than alloys that contain a very high percentage of magnesium.

Aluminium alloy surfaces will develop a white, protective layer of aluminium oxide if left unprotected by anodizing and/or correct painting procedures. In a wet environment, galvanic corrosion can occur when an aluminium alloy is placed in electrical contact with other metals with more positive corrosion potentials than aluminium, and an electrolyte is present that allows ion exchange. Referred to as dissimilar-metal corrosion, this process can occur as exfoliation or as intergranular corrosion. Aluminium alloys can be improperly heat treated. This causes internal element separation, and the metal then corrodes from the inside out. Aircraft mechanics deal daily with aluminium alloy corrosion.

Aluminium alloy compositions are registered with The Aluminum Association. Many organizations publish more specific standards for the manufacture of aluminium alloy, including the Society of Automotive Engineers standards organization, specifically its aerospace standards subgroups and ASTM International

• Aluminum Square 6063 Bar
• Aluminum Alloy 6351 T6 Plates
• Aluminum Round Bar 6082-T6
• Aluminum Alloy 5052 H32
• Aluminum Alloy 6061 T6 Plates
• Aluminum Tread Plate
• Aluminium Hexagon
• Aluminum Round 6061 T6
• Aluminum Flat Bars
• Aluminum Alloy 6082
• Aluminum Strips
• Aluminum Square Bar 6061 T6
• Aluminium Square Sheet
• Aluminum Bars
• Aluminum Angles
• Aluminum Alloy Sheet 3003-H14
• Aluminum Busbar
• Aluminum Plates
• Aluminum Square Bar
• Aluminum Square and Hex Bar
• Aluminum Channels
• Aluminum Alloy 2014
• Aluminum Hex Bar
• Aluminum Alloy 2024
• Aluminum Diamond Tread Plate
• Aluminum Flat 6061
• Aluminium Tube Round
• Aluminum Alloy 5086
• Aluminum Alloy 2219
• Aluminum Alloy 5083
• Aluminum Washer
• Aluminum Alloy 7075
• Aluminum Foils
• Aluminum Sheets
• Aluminum Corrugated Sheets
• Aluminum Circle
• Aluminum Coils
• Aluminum Tees
• Aluminum Round Bar
• Aluminum Chequered Sheets

Features:

• Heat resistance
• Durable finish
• Less maintenance

Stainless steel is a corrosion resistant steel alloy with a minimum of 10.5% chromium. There are different grades and surface finishes of stainless steel produced to accommodate the environment in which the material will be implemented. Unlike carbon steel, stainless steel does not rust when exposed to air and moisture due to the sufficient amount of chromium present.

OZAIR TRADELINK Steels TITNIUM Alloys stocks a large and varied inventory of titanium mill-product forms such as plate, sheet, coil, strip, foil, billet, bar and wire. Our material is of prime quality and is fully certifiable to orthopedic, aerospace and industrial specifications.

Inconel Alloys or are highly engineered to offer a superior combination of high temperature corrosion resistance, toughness , heat resistance and strength and for the most demanding applications.Inconel is a family of austenite nickel-chromium-based superalloys.

Nickel is a versatile, highly corrosion resistant element that will alloy with most metals. Due to its corrosion resistance, nickel is used to maintain product purity in the processing of foods and synthetic fibers. It is highly resistant to various reducing chemicals and is unexcelled in resistance to caustic alkalies.

A nickel-iron controlled-expansion alloy containing 42% nickel. It has a low and nominally constant coefficient of thermal expansion from room temperature to about 570f (300c).

Monel is a group of nickel alloys, primarily composed of nickel (up to 67%) and copper, with small amounts of iron, manganese, carbon, and silicon. Stronger than pure nickel, Monel alloys are resistant to corrosion by many agents, including rapidly flowing seawater. They can be fabricated readily by hot- and cold-working, machining, and welding.